|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
12-11-2013, 06:45 AM
|
#1 |
|
Registered User
Join Date: Mar 2011
Location: Midvale, Utah
Posts: 220
|
Re: 1987 2wd Jimmy, Project (Cheap a$$)
I mounted my front K-member tonight to the 4x4 frame. I used thin cardboard to make a temp-let of the 3 holes on the bottom of the frame. couple things I'm worried about.
the 4x4 frame was 1/4" narrower than the 2wd frame. after I cut out the very front cross-member the frame widened enough. Is this ok? also how perfect does the k-member have to be straight. If its off 1/16" or less off from front to back make a huge difference? or can that be accounted for in the alignment.  
__________________
I LIKE TRUCKS 1986 GMC Suburban Build Build link 1982 Chevy SWB 2wd Scottsdale, Build Link Sold  1987 Jimmy Build, Project Cheap A$$ Build Link Last edited by 68Timber; 12-14-2013 at 09:28 AM. Reason: stack the pictures |
|
|
|
| Bookmarks |
| Tags |
| 4wd to 2wd, blazer, jimmy, lsx swap, nocturnal performance |
|
|
Hybrid Mode
