Re: 17" FJ cruiser wheels
I welded small angle iron in the bed for the wood to sit on and so I can screw the wood in place. I could have used channel so the wood just slides in and is held in place though. Might be a future upgrade. Used what I had at the time. I had some old wood laying around. I cut 5 or 6 boards the width of the bed. Put them on the angle and stapled a sheet of vinyl to the boards keeping them tight. Then I cut the boards needed the length of the bed. Then I screwed the top boards to the bottoms keeping the vinyl tight. Then I screwed the cover to the angle in the 4 corners so I could remove it quickly when needed. Haven't had to remove it yet but I can easily take it off and on by sliding it off and putting it in the bed.
|