|
09-09-2014, 09:05 PM
|
#11 |
|
Senior Member
Join Date: May 2009
Location: Fort Worth, TX
Posts: 6,370
|
Re: 700R4 build thread.
Turn Trans so the Pan rail is facing Up.
Install the TCC Solenoid & Governor Thimble Filters, Push them in with a pocket screwdriver. Install the Case Checkballs as shown below, If using a Shift Kit...Follow those directions! The Green Arrows....These are "Z" holes/Alignment holes. Cut the heads off 2 6x1.00mm bolts, Thread them in the Z holes, They act as dowels, This will align the gaskets, Plate & Valve body. First pic, '82-Early '87, Install #9 Checkball. Second Pic, '88-'93, Omit #9 Checkball. |
|
|
| Bookmarks |
|
|
Threaded Mode