454 and BBC performance parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tracy Focht · 01-28-2004, 02:37 PM

I have bought a virgin block, never been touched with -781 heads, intake to pan.
Then I have bought from a guy I trust, a modified Holley 850 cfm carb, new Vic. Jr. Edelbrock intake, his worked -781 heads that have been surfaced, bowl blended, stage 2 port job, S/S 2.19/1.88 valves, Comp Cam springs good to .650 lift, over $1000 worth of work done to these, his Comp 294s solid cam, 294 adv with 248@.050 land .595 lift, Comp true roller timing chain, Harland Sharp full roller rockers, Comp pushrods..whole top end...

Well, I ran into an emergency yesterday, and will sell for what I bought all this for.
All you need is to freshed up the bottom of the 454, and you'll have another set of stock 781's as well with that, have the crank turned, re-size the rods, add pistons of your choice, you'd be set with a screamer motor. Will sell cheap.

a good inexpensive way to have a 500hp motor with tons of torque as well...

will cover freight if semi close...
$1900.00 for everything

Tom · 01-28-2004, 02:40 PM

I hope everything is ok tracy

Burnsman · 01-28-2004, 03:01 PM

Tracy, let me know if you are interested in selling the carb only. Thanks. Brian

phantom dually · 01-28-2004, 08:43 PM

Post a few pics if you can??

Tracy Focht · 01-28-2004, 08:59 PM

Quote:

Originally posted by phantom dually
Post a few pics if you can??

what's up man...got your 406 yesterday, Tony was pleased....

I have pics of the heads, intake and carb...I forgot your email address. email me at tfocht@kicker.com

phantom dually · 01-28-2004, 09:17 PM

Glad you guys are happy with it. Let me know how it runs!!! Also if you guys need any new parts let me know as I have a few connections that I am getting into.

Tracy Focht · 01-28-2004, 09:18 PM

Quote:

Originally posted by phantom dually
Glad you guys are happy with it. Let me know how it runs!!! Also if you guys need any new parts let me know as I have a few connections that I am getting into.

ok, sounds good!

phantom dually · 01-30-2004, 10:45 PM

SOLD!!!

Tracy Focht · 01-30-2004, 11:04 PM

Quote:

Originally posted by phantom dually
SOLD!!!

somebody's going to have a BIG motor

phantom dually · 01-30-2004, 11:24 PM

How do you go about stroking one of these??

Tracy Focht · 01-30-2004, 11:26 PM

Quote:

Originally posted by phantom dually
How do you go about stroking one of these??

stroker crank, and 6.385 rods...

phantom dually · 01-30-2004, 11:29 PM

AH HA!! So the crank is not a factory piece. Its a custom build??

Tracy Focht · 01-30-2004, 11:30 PM

Quote:

Originally posted by phantom dually
AH HA!! So the crank is not a factory piece. Its a custom build??

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2456387485&category=33616

phantom dually · 01-30-2004, 11:42 PM

Link does not worky!!

Tracy Focht · 01-30-2004, 11:59 PM

http://cgi.ebay.com/ebaymotors/ws/eB...category=33616

phantom dually · 01-31-2004, 12:04 AM

What has to be done to the block to accept this crank?? Also what size rods are needed??

phantom dually · 02-01-2004, 12:16 AM

What is the casting number on this block?? 2 or 4 bolt cast or forged crank and rods??

01-28-2004, 02:37 PM	#1
Tracy Focht Registered User Join Date: Dec 1999 Location: Stillwater, OK 74075 Posts: 2,936	454 and BBC performance parts I have bought a virgin block, never been touched with -781 heads, intake to pan. Then I have bought from a guy I trust, a modified Holley 850 cfm carb, new Vic. Jr. Edelbrock intake, his worked -781 heads that have been surfaced, bowl blended, stage 2 port job, S/S 2.19/1.88 valves, Comp Cam springs good to .650 lift, over $1000 worth of work done to these, his Comp 294s solid cam, 294 adv with 248@.050 land .595 lift, Comp true roller timing chain, Harland Sharp full roller rockers, Comp pushrods..whole top end... Well, I ran into an emergency yesterday, and will sell for what I bought all this for. All you need is to freshed up the bottom of the 454, and you'll have another set of stock 781's as well with that, have the crank turned, re-size the rods, add pistons of your choice, you'd be set with a screamer motor. Will sell cheap. a good inexpensive way to have a 500hp motor with tons of torque as well... will cover freight if semi close... $1900.00 for everything

01-28-2004, 02:40 PM	#2
Tom driving is in my blood Join Date: Dec 1999 Location: Mesa AZ Posts: 5,702	I hope everything is ok tracy __________________ -78 c10 short/step: 388cid, M20, 5/5 drop, lots more. Playtoy and first vehicle. -98 c1500 x-cab: 5.7L, 17" rims, 5/6 drop, flowmaster, helper bags,NBS rear disk brakes. -02 Suburban 4x4: leveled front -CBR600F4i, CBR600RR, CBR1000RR, and standup skis DISCLAIMER: I cant spell for the life of me.

01-28-2004, 03:01 PM	#3
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	454 stuff Tracy, let me know if you are interested in selling the carb only. Thanks. Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

01-28-2004, 08:43 PM	#4
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	Post a few pics if you can?? __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

01-28-2004, 09:17 PM	#6
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	Glad you guys are happy with it. Let me know how it runs!!! Also if you guys need any new parts let me know as I have a few connections that I am getting into. __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

01-30-2004, 10:45 PM	#8
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	SOLD!!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

01-30-2004, 11:24 PM	#10
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	How do you go about stroking one of these?? __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

01-30-2004, 11:29 PM	#12
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	AH HA!! So the crank is not a factory piece. Its a custom build?? __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

01-30-2004, 11:42 PM	#14
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	Link does not worky!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

01-30-2004, 11:59 PM	#15
Tracy Focht Registered User Join Date: Dec 1999 Location: Stillwater, OK 74075 Posts: 2,936	http://cgi.ebay.com/ebaymotors/ws/eB...category=33616

01-31-2004, 12:04 AM	#16
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	What has to be done to the block to accept this crank?? Also what size rods are needed?? __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

02-01-2004, 12:16 AM	#17
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	What is the casting number on this block?? 2 or 4 bolt cast or forged crank and rods?? __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.