NC 60-63 Factory Gauge Cluster Lens Needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1963c-10 · 05-16-2014, 09:17 AM

Like the title states.....I need a 60-63 lens for a factory gauge cluster. Please let me know what you've got. Thanks.

Just need the lens!!

Budman56 · 05-16-2014, 09:32 AM

Quote:

Originally Posted by 1963c-10

Like the title states.....I need a 60-63 lens for a factory gauge cluster. Please let me know what you've got. Thanks.

Just need the lens!!

What style? gauges or lights?

1963c-10 · 05-16-2014, 11:25 AM

Gauges

I have a cluster housing.... 2 full sets of gauges and the front bezel....just need the plastic lens. Its a cluster I'm putting together for the fleetside....I have the gauges in the stepside already w/factory tach and vac gauge

Brad54 · 05-16-2014, 09:26 PM

If anyone has another, I could use one too. Full instrument lens for '60-'63.

-Brad

**TBONE1964** · 05-17-2014, 12:08 PM

I am not home until the 29th. I will have to recheck my inventory but I do not believe I have any.

These are super hard to find in good restorable condition.

Good luck with the search.
Tom

1963c-10 · 05-17-2014, 04:22 PM

thanks tom

1963c-10 · 04-14-2015, 03:46 PM

Still looking...

62 bigwindow · 04-16-2015, 10:03 PM

does gauges or lights make a difference in the 60-63 lens?
I have one still in the gauge cluster

**TBONE1964** · 04-17-2015, 12:28 AM

Quote:

Originally Posted by 62 bigwindow

does gauges or lights make a difference in the 60-63 lens?
I have one still in the gauge cluster

Here are the differences in the cluster types. There is the full gauge style that will accept a tach and vac gauge or air and there is the other style with fuel and temp only gauges. There is also a version of this cluster that is fuel gauge only.

The full gauge cluster lenses are real hard to find. I will get back with the OP if I can help him with one.

Take care,
Tom

62 bigwindow · 04-17-2015, 09:19 AM

I know the difference between with GAUGES or LIGHTS that's VERY obvious I was asking what is the difference in the LENS?????

1963c-10 · 04-17-2015, 10:15 AM

The layout on the lens is different between the two. The writing is on the back of the lens, so the two are not interchangeable.

**TBONE1964** · 04-17-2015, 10:42 AM

Quote:

Originally Posted by 62 bigwindow

I know the difference between with GAUGES or LIGHTS that's VERY obvious I was asking what is the difference in the LENS?????

If I have offended you, I apologize, no intent. I guess what I should have said is that there is a difference between the lens on a warning light cluster compared to a full gauge cluster.

The difference in the lens is shown in the photos I posted. The small gauges on a warning light lens are next to each other horizontally and the small gauges on the full gauge cluster are vertical (almost) to each other.

Hope this helps.

Have a great weekend,
Tom

**TBONE1964** · 04-29-2015, 03:55 AM

Here you go if interested,

They both are very restorable lenses but will need paint stripped and repainted as well as buffed.

The one with the white lettering/numbers is probably the nicer of the two but they will both need some work to show nice.

I almost hate to sell these as they don't come around that often. I get customers from time to time that want restoration done with cracked lenses and I have no good source for them.

I need $60.00 shipped for what ever one you want and I will insure the package for the purchase price.

Let me know,
Thak you,
Tom

MitchFloyd · 04-29-2015, 11:06 AM

T-Bone, I'll take one, (the white lettering) if it's available. PM me for payment details.

**TBONE1964** · 04-29-2015, 11:15 AM

Quote:

Originally Posted by MitchFloyd

T-Bone, I'll take one, (the white lettering) if it's available. PM me for payment details.

Let me see what 1963-c10 wants to do before I make a decision. This is his thread after all and I want him to make his choice if he is interested.

I will let you know soon,
Thank you,
Tom

1963c-10 · 04-30-2015, 08:07 AM

Thank you for the offer and holding the part TBone. I found one a few days ago. Thanks.
Let MitchFloyd have his pick.

**TBONE1964** · 04-30-2015, 11:12 AM

Quote:

Originally Posted by MitchFloyd

T-Bone, I'll take one, (the white lettering) if it's available. PM me for payment details.

MitchFloyd,

You are on for the white letting one if still interested.

PM on the way,

Thank you,
THomas

MitchFloyd · 04-30-2015, 11:29 AM

Money sent via Paypal.

Thanks!

**TBONE1964** · 05-02-2015, 02:34 PM

Quote:

Originally Posted by MitchFloyd

Money sent via Paypal.

Thanks!

Mitch, I have your payment and address and I will get the lens shipped out on Monday.

Thank you again,
Tom

05-16-2014, 09:17 AM	#1
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	60-63 Factory Gauge Cluster Lens Needed Like the title states.....I need a 60-63 lens for a factory gauge cluster. Please let me know what you've got. Thanks. Just need the lens!! __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer Last edited by 1963c-10; 04-14-2015 at 04:54 PM.

05-16-2014, 11:25 AM	#3
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: 60-63 Factory Gauge Cluster Lens Needed Gauges I have a cluster housing.... 2 full sets of gauges and the front bezel....just need the plastic lens. Its a cluster I'm putting together for the fleetside....I have the gauges in the stepside already w/factory tach and vac gauge __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer Last edited by 1963c-10; 05-16-2014 at 02:07 PM.

05-16-2014, 09:26 PM	#4
Brad54 Registered User Join Date: Aug 2006 Location: Athens, Georgia Posts: 1,456	Re: 60-63 Factory Gauge Cluster Lens Needed If anyone has another, I could use one too. Full instrument lens for '60-'63. -Brad __________________ '61 Suburban daily driver: off the road due to 180-pound 8-pt buck! '62 K-10 long-step project '61 C30 Camper, aka "Valdez" There's no cool like Old School

05-17-2014, 12:08 PM	#5
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	Re: 60-63 Factory Gauge Cluster Lens Needed I am not home until the 29th. I will have to recheck my inventory but I do not believe I have any. These are super hard to find in good restorable condition. Good luck with the search. Tom __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C

05-17-2014, 04:22 PM	#6
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: 60-63 Factory Gauge Cluster Lens Needed thanks tom __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

04-14-2015, 03:46 PM	#7
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: 60-63 Factory Gauge Cluster Lens Needed Still looking... __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

04-16-2015, 10:03 PM	#8
62 bigwindow Registered User Join Date: Apr 2011 Location: Mocksville NC Posts: 824	Re: 60-63 Factory Gauge Cluster Lens Needed does gauges or lights make a difference in the 60-63 lens? I have one still in the gauge cluster

04-17-2015, 09:19 AM	#10
62 bigwindow Registered User Join Date: Apr 2011 Location: Mocksville NC Posts: 824	Re: 60-63 Factory Gauge Cluster Lens Needed I know the difference between with GAUGES or LIGHTS that's VERY obvious I was asking what is the difference in the LENS?????

04-17-2015, 10:15 AM	#11
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: 60-63 Factory Gauge Cluster Lens Needed The layout on the lens is different between the two. The writing is on the back of the lens, so the two are not interchangeable. __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

04-29-2015, 03:55 AM	#13
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	Re: 60-63 Factory Gauge Cluster Lens Needed Here you go if interested, They both are very restorable lenses but will need paint stripped and repainted as well as buffed. The one with the white lettering/numbers is probably the nicer of the two but they will both need some work to show nice. I almost hate to sell these as they don't come around that often. I get customers from time to time that want restoration done with cracked lenses and I have no good source for them. I need $60.00 shipped for what ever one you want and I will insure the package for the purchase price. Let me know, Thak you, Tom Attached Images __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C

04-29-2015, 11:06 AM	#14
MitchFloyd Registered User Join Date: Feb 2013 Location: Dallas, Tx Posts: 286	Re: 60-63 Factory Gauge Cluster Lens Needed T-Bone, I'll take one, (the white lettering) if it's available. PM me for payment details. __________________ '62 Chevy K10

04-30-2015, 08:07 AM	#16
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: 60-63 Factory Gauge Cluster Lens Needed Thank you for the offer and holding the part TBone. I found one a few days ago. Thanks. Let MitchFloyd have his pick. __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

04-30-2015, 11:29 AM	#18
MitchFloyd Registered User Join Date: Feb 2013 Location: Dallas, Tx Posts: 286	Re: 60-63 Factory Gauge Cluster Lens Needed Money sent via Paypal. Thanks! __________________ '62 Chevy K10



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.