MO 1969 - 70 cab cuts and parts from part out - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Clatterville trolley** · 02-13-2016, 02:00 PM

Quote:

Originally Posted by dutchmanz

I'll try to get something tomorrow and email it to you.

Here are photos of the part I have. You will notice that I have numbered the lines incase I haven't allowed enough to do what you want you can indicate by saying increase #1 or decrease #3, etc. Hope that helps us communicate accurately. Jay

Name: DSCN1511 (1).jpg
Views: 231
Size: 36.3 KB

Name: DSCN1511 (1).jpg
Views: 231
Size: 36.3 KB

Name: DSCN1510 (1).jpg
Views: 217
Size: 41.7 KB

Name: DSCN1509 (1).jpg
Views: 218
Size: 40.9 KB

Name: DSCN1513 (1).jpg
Views: 186
Size: 39.1 KB

**dutchmanz** · 02-13-2016, 02:09 PM

Quote:

Originally Posted by Clatterville trolley

Here are photos of the part I have. You will notice that I have numbered the lines incase I haven't allowed enough to do what you want you can indicate by saying increase #1 or decrease #3, etc. Hope that helps us communicate accurately. Jay

I think that will be perfect for what I need.

**Clatterville trolley** · 02-13-2016, 02:14 PM

Quote:

Originally Posted by dutchmanz

I think that will be perfect for what I need.

Would you be OK with $35 plus shipping for that part? I can trim out some of the inner panel if that would help on weight / shipping cost if you want me to. Let me know - Jay

**Clatterville trolley** · 02-13-2016, 02:18 PM

Here are more photos of the frame from this truck requested by "ne1988"

Name: DSCN1502 (1).jpg
Views: 186
Size: 78.7 KB

Name: DSCN1503 (1).jpg
Views: 247
Size: 70.4 KB

Name: DSCN1504 (1).jpg
Views: 244
Size: 79.3 KB

Name: DSCN1505 (1).jpg
Views: 252
Size: 69.8 KB

Name: DSCN1506 (1).jpg
Views: 248
Size: 69.7 KB

**Clatterville trolley** · 02-13-2016, 02:19 PM

And a few more:

Name: DSCN1507 (1).jpg
Views: 259
Size: 64.6 KB

Name: DSCN1508 (1).jpg
Views: 269
Size: 62.4 KB

**dutchmanz** · 02-13-2016, 02:18 PM

Quote:

Originally Posted by Clatterville trolley

Would you be OK with $35 plus shipping for that part? I can trim out some of the inner panel if that would help on weight / shipping cost if you want me to. Let me know - Jay

I can do that, just let me know what shipping is when you can. Probably won't matter if you cut the inside or not so no need to cut more. Just be fair to me on shipping. Thanks!

**Clatterville trolley** · 02-13-2016, 02:22 PM

Quote:

Originally Posted by dutchmanz

I can do that, just let me know what shipping is when you can. Probably won't matter if you cut the inside or not so no need to cut more. Just be fair to me on shipping. Thanks!

Will do! Certainly will attempt to get the least expensive rate for shipping I can, but the folks that ship this stuff don't seem to have much compassion for us poor souls trying to put together these cool trucks.

Jay

**Oddfire** · 02-13-2016, 06:47 PM

Jay that section looks good as long as there's no spots rusted clean through. If you can cut a 6" wide section of what you showed me & let me know shipping cost for 22630 zip. thanks Jamie

**dutchmanz** · 02-20-2016, 07:40 AM

Quote:

Originally Posted by Clatterville trolley

Will do! Certainly will attempt to get the least expensive rate for shipping I can, but the folks that ship this stuff don't seem to have much compassion for us poor souls trying to put together these cool trucks.

Jay

Any word on shipping? I only ask since I see you are headed out of town.

**Oddfire** · 02-20-2016, 07:44 AM

Yes I never got a shipping quote either Jay. Let me know. Jamie

**Clatterville trolley** · 02-20-2016, 09:18 PM

Quote:

Originally Posted by dutchmanz

Any word on shipping? I only ask since I see you are headed out of town.

Cab pieces were down in pasture and finally got my tractor to start - bottom line is I got your piece cut out yesterday late. I will get it packaged tomorrow afternoon to send on Monday.
Not sure about shipping, but let's just do $15.00 and I will send it one way or the other. Just PayPal me $50 at 1windyridgebou@gmail.com and we will be good to go. Jay

02-13-2016, 02:18 PM	#4
Clatterville trolley Senior Member Join Date: Apr 2013 Location: Columbia, MO Posts: 1,923	Re: 1969 - 70 cab cuts and parts from part out Here are more photos of the frame from this truck requested by "ne1988"

02-13-2016, 02:19 PM	#5
Clatterville trolley Senior Member Join Date: Apr 2013 Location: Columbia, MO Posts: 1,923	Re: 1969 - 70 cab cuts and parts from part out And a few more:

02-13-2016, 06:47 PM	#8
Oddfire Senior Member Join Date: Jan 2013 Location: Front Royal, Va Posts: 689	Re: 1969 - 70 cab cuts and parts from part out Jay that section looks good as long as there's no spots rusted clean through. If you can cut a 6" wide section of what you showed me & let me know shipping cost for 22630 zip. thanks Jamie

02-20-2016, 07:44 AM	#10
Oddfire Senior Member Join Date: Jan 2013 Location: Front Royal, Va Posts: 689	Re: 1969 - 70 cab cuts and parts from part out Yes I never got a shipping quote either Jay. Let me know. Jamie



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.