No Limit Trailing Arm Rear Suspension

[70inbville]

Thanks Rob, I want the ride and drop of about 7 in so yes to the blocks. any worries of scrub line with a 16 in wheel with this kit at that drop?

[robnolimit]

Originally Posted by 70inbville

Thanks Rob, I want the ride and drop of about 7 in so yes to the blocks. any worries of scrub line with a 16 in wheel with this kit at that drop?

Scrub line would be close. The lowest point of the system (like a stock trailing arm), is the U-bolt and hardware under the axle. With out any blocks, this is 5.75" (measured from the axle CL down to the lowest point) with our trailing arm kit. So, with a 2" block, you will have 7.75" from the axle CL down, and a 16" rim will have a scrub line of appx 8.2". So, it's close with a 16" wheel, but you will have .45" to spare.

[70's luvr]

I'm about to put a c-notch in and am really interested in your version that doesn't hack more than whats needed.

[70inbville]

0.45" is a tad close, need to change that plan a bit. I would had to drag on a pebble in the road. Rob, thanks for the great info and help with the plans of many here!!

[crakarjax]

Originally Posted by 70inbville

0.45" is a tad close, need to change that plan a bit. I would had to drag on a pebble in the road. Rob, thanks for the great info and help with the plans of many here!!

Scrub line only applies to flat-tire situations

[70inbville]

Originally Posted by crakarjax

Scrub line only applies to flat-tire situations

that is also good info to have thanks