AZ Parting out 73 Cheyenne Super 20 - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

burban nate · 03-20-2016, 06:23 PM

Quote:

Originally Posted by 1774btcrew

It is a woodgrain truck but the bezel is long gone. It is really hard to find these for the early trucks with woodgrain as it was a 2 year bezel and only the higher optioned ones had it. Let me see if I still have the 454 emblem. We did a c10 truck swapmeet here in town and I sold quite a bit of stuff. I put what was left in storage.

Have you had a chance to look for the 454 emblem?

Thanks, Nate

**1774btcrew** · 03-22-2016, 09:19 PM

I did get the emblem picked up from storage. I will work on getting some pictures.

1972_K5 · 03-24-2016, 01:23 AM

How much for the hub caps?

**1774btcrew** · 03-24-2016, 11:26 PM

Quote:

Originally Posted by burban nate

What do you need for the 454 emblem?

Nate

EDIT: Sorry I just realized you have $20 on it. Do you have any close up pictures of it?

I have pictures. If you PM me your email address, I can send you some

**1774btcrew** · 03-24-2016, 11:26 PM

Quote:

Originally Posted by 1972_K5

How much for the hub caps?

Let me look them over tomorrow

ECU PIRATE · 03-27-2016, 05:18 PM

I am gather the cab wiring harness is gone as well?

**1774btcrew** · 03-28-2016, 12:44 AM

The cab wiring harness is still there, although I haven't had a chance to look it over. Nate, will send pics of the 454 emblem in the AM

74Chevy808 · 03-30-2016, 04:03 AM

Interested in LH motor mount bracket(mount to frame). LMK

**1774btcrew** · 03-30-2016, 08:54 PM

Quote:

Originally Posted by 74Chevy808

Interested in LH motor mount bracket(mount to frame). LMK

I do have it. Since the truck still has the motor in it though I can't justify pulling it. Sorry I couldn't help.

**1774btcrew** · 11-03-2016, 03:47 PM

There is still quite a bit of this truck left!

burban nate · 11-03-2016, 04:05 PM

Looking for a few sets of '73-'74 outside door handles in decent shape. I like the early ones that the back is solid. Not the ones that have the open channel cast in.

Thanks, Nate

**1774btcrew** · 11-03-2016, 10:47 PM

Nate, I like them the best too. They are reserved for my crew cab for that reason. I MAY have another pair. I need to look. I will be at the shop tomorrow.

c1087 · 11-06-2016, 09:44 PM

If you still have them, what condition are the headlight bezels in?

**1774btcrew** · 11-07-2016, 12:10 AM

The headlight bezels weren't good. Pitted and rough. I have a few good ones at the shop though. How nice are you looking for?

c1087 · 11-07-2016, 10:01 PM

I'm trying to find a set with as little pitting as possible. Hoping to get a set that are nice enough to be worth having re-plated when I get into doing the body and paint on my '76. The ones on the truck now are pitted pretty badly and probably would not be worth trying to save. I don't really like the idea of using plastic aftermarket bezels either, so a nice used set seems to be the best starting point for me.

**1774btcrew** · 11-07-2016, 10:15 PM

Quote:

Originally Posted by c1087

I'm trying to find a set with as little pitting as possible. Hoping to get a set that are nice enough to be worth having re-plated when I get into doing the body and paint on my '76. The ones on the truck now are pitted pretty badly and probably would not be worth trying to save. I don't really like the idea of using plastic aftermarket bezels either, so a nice used set seems to be the best starting point for me.

If you send me a PM with either a phone number or email address, I will get you some pics when I am back down at the shop

DownLowHoe · 11-08-2016, 10:05 AM

Looking for a set of grill brackets if you have any more.

c1087 · 11-08-2016, 09:33 PM

Quote:

Originally Posted by 1774btcrew

If you send me a PM with either a phone number or email address, I will get you some pics when I am back down at the shop

That sounds good. Thanks for taking the time to send me some pics. Sending pm now.

**1774btcrew** · 11-09-2016, 01:08 PM

Quote:

Originally Posted by DownLowHoe

Looking for a set of grill brackets if you have any more.

I do have another set. If you send me a PM with an email address and zip code I will be happy to get you a shipping quote.

**jdl71** · 11-11-2016, 10:54 PM

What's your plan for the cab? Selling it whole or willing to cut? I'm looking for some corners.

**1774btcrew** · 11-12-2016, 03:37 PM

I have a cab I could cut. Don't know if it would be worth the time. We actually have 3 good parts cabs

03-22-2016, 09:19 PM	#27
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,543	Re: Parting out 73 Cheyenne Super 20 I did get the emblem picked up from storage. I will work on getting some pictures. __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

03-24-2016, 01:23 AM	#28
1972_K5 Registered User Join Date: Apr 2004 Location: Nampa, Idaho Posts: 119	Re: Parting out 73 Cheyenne Super 20 How much for the hub caps? __________________ 1972 K5 CST

03-27-2016, 05:18 PM	#31
ECU PIRATE Registered User Join Date: Apr 2009 Location: Centreville, Virginia Posts: 846	Re: Parting out 73 Cheyenne Super 20 I am gather the cab wiring harness is gone as well? __________________ The Fleet........ 68' Camaro - 1st car (restored & still have it) 09' VW Tiguan (Wife's Daily Driver) 14' VW Passat SE TSI (my personal) 14' Ford Edge Sport (Daily Work Vehicle) 73' SWB Stepside - 77K org. miles 74' LWB 454/TH400 - drive train transplant for my (Sold) 98' SWB C1500 W/T - shop truck (Sold) 90' GMC Sierra SLE short step - aka " Jezabelle " (Sold)

03-28-2016, 12:44 AM	#32
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,543	Re: Parting out 73 Cheyenne Super 20 The cab wiring harness is still there, although I haven't had a chance to look it over. Nate, will send pics of the 454 emblem in the AM __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

03-30-2016, 04:03 AM	#33
74Chevy808 Registered User Join Date: Mar 2016 Location: Kapaa Hawaii Posts: 4	Re: Parting out 73 Cheyenne Super 20 Interested in LH motor mount bracket(mount to frame). LMK

11-03-2016, 03:47 PM	#35
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,543	Re: Parting out 73 Cheyenne Super 20 There is still quite a bit of this truck left! __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

11-03-2016, 04:05 PM	#36
burban nate Registered User Join Date: Feb 2014 Location: Reedsville, WI Posts: 191	Re: Parting out 73 Cheyenne Super 20 Looking for a few sets of '73-'74 outside door handles in decent shape. I like the early ones that the back is solid. Not the ones that have the open channel cast in. Thanks, Nate __________________ Current Project: 1990 V3500 CC dually.

11-03-2016, 10:47 PM	#37
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,543	Re: Parting out 73 Cheyenne Super 20 Nate, I like them the best too. They are reserved for my crew cab for that reason. I MAY have another pair. I need to look. I will be at the shop tomorrow. __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

11-06-2016, 09:44 PM	#38
c1087 Registered User Join Date: Jan 2011 Location: PA Posts: 56	Re: Parting out 73 Cheyenne Super 20 If you still have them, what condition are the headlight bezels in? __________________ '76 C10 Silverado - 350/TH350 '87 R10 Silverado - 305tbi/700R4 '05 Silverado Z71 - 5.3/4L60e

11-07-2016, 12:10 AM	#39
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,543	Re: Parting out 73 Cheyenne Super 20 The headlight bezels weren't good. Pitted and rough. I have a few good ones at the shop though. How nice are you looking for? __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

11-07-2016, 10:01 PM	#40
c1087 Registered User Join Date: Jan 2011 Location: PA Posts: 56	Re: Parting out 73 Cheyenne Super 20 I'm trying to find a set with as little pitting as possible. Hoping to get a set that are nice enough to be worth having re-plated when I get into doing the body and paint on my '76. The ones on the truck now are pitted pretty badly and probably would not be worth trying to save. I don't really like the idea of using plastic aftermarket bezels either, so a nice used set seems to be the best starting point for me. __________________ '76 C10 Silverado - 350/TH350 '87 R10 Silverado - 305tbi/700R4 '05 Silverado Z71 - 5.3/4L60e

11-08-2016, 10:05 AM	#42
DownLowHoe Registered User Join Date: May 2005 Location: Orlando Posts: 205	Re: Parting out 73 Cheyenne Super 20 Looking for a set of grill brackets if you have any more.

11-11-2016, 10:54 PM	#45
jdl71 Senior Member Join Date: Oct 2012 Location: Eldon, MO Posts: 1,753	Re: Parting out 73 Cheyenne Super 20 What's your plan for the cab? Selling it whole or willing to cut? I'm looking for some corners. __________________ Psalm 23 64 C10 66 K20

11-12-2016, 03:37 PM	#46
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,543	Re: Parting out 73 Cheyenne Super 20 I have a cab I could cut. Don't know if it would be worth the time. We actually have 3 good parts cabs __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.