OMG Honda door weatherstripping fits perfect no cutting required !!

[mrlobster]

Put a set of Honda door seals on my 72 GMC tonight- fit was near perfect, just had to cut it and trim about 1.5" from its total length. The doors shut with just the right amount of effort- no slamming necessary!
I had a set of Precision push-on seals prior and the doors were near impossible to shut. They are a quality product, just didn't fit right for me.

[Arnulfo]

Originally Posted by mrlobster

Put a set of Honda door seals on my 72 GMC tonight- fit was near perfect, just had to cut it and trim about 1.5" from its total length. The doors shut with just the right amount of effort- no slamming necessary!
I had a set of Precision push-on seals prior and the doors were near impossible to shut. They are a quality product, just didn't fit right for me.

Mrlobster, what year and model honda did they come off of? Thanks

[Hvychvy970]

Originally Posted by mrlobster

Put a set of Honda door seals on my 72 GMC tonight- fit was near perfect, just had to cut it and trim about 1.5" from its total length. The doors shut with just the right amount of effort- no slamming necessary!
I had a set of Precision push-on seals prior and the doors were near impossible to shut. They are a quality product, just didn't fit right for me.

I just ordered some new seals. They don’t seem to have a lip to slide over the door seal channel. Is this what yours look like?

[TKCR]

Originally Posted by volksworld

went to grab a set off a 2008 at LKQ today...the seal has an extra inner lip about 3/4 of an inch wide that covers the edge of the upholstery on the honda...not sure if it will touch the metal around the door frame ....looks like it may have 1/4 inch of standoff when installed....unfortunately the car i found had a light grey interior so this lip was grey 3/4 of the way around and black where it went under the rocker trim panel....so i guess these will only work if you find one with a black interior...at least it wasnt the only thing i went there for...

Originally Posted by Hvychvy970

I just ordered some new seals. They don’t seem to have a lip to slide over the door seal channel. Is this what yours look like?

What you got and ordered, was the door weatherstrip. It actually goes on the door. What everyone is using, is the open seal. It goes around the opening of the car itself. That's why it's called an Open Seal.

[TKCR]

https://www.hondapartsnow.com/Page_P...ds=Open%20seal

These are the open seals

[Hvychvy970]

Originally Posted by TKCR

https://www.hondapartsnow.com/Page_P...ds=Open%20seal

These are the open seals

Ok. So these are the correct ones? Is gray the only color they make?

[TKCR]

Originally Posted by Hvychvy970

Ok. So these are the correct ones? Is gray the only color they make?

Here's the black. They actually come in grey, black & ivory
https://www.hondacarpartsdirect.com/...SABEgLbr_D_BwE
https://www.hondacarpartsdirect.com/...1ob25kYQ%3D%3D

[tdangle]

Might have to give these a try. I have tried the glue on ones, had to slam the doors. Bought a set of Precision push on ones that were suppose to be the best and still have to slam the door. To me it seems as if the push on part holds the rubber too far out. Getting tired of buying the same thing over and over. Either that or not run seals, then the door shuts so nice.

[Hvychvy970]

Originally Posted by TKCR

Here's the black. They actually come in grey, black & ivory
https://www.hondacarpartsdirect.com/...SABEgLbr_D_BwE
https://www.hondacarpartsdirect.com/...1ob25kYQ%3D%3D

Ordered these yesterday. Here goes nothing.