DBW Gas Pedal Adpater bracket for truck/suv pedal

[birkinsb]

Can you check on the bracket I ordered I have still not received it .

[Hart_Rod]

Originally Posted by birkinsb

Can you check on the bracket I ordered I have still not received it .

You should have gotten it by now. PM me your address again and I will check on it this evening when I get home. Sorry for the delay.

[Hart_Rod]

Originally Posted by birkinsb

Can you check on the bracket I ordered I have still not received it .

Brian - I sent you a PM with the tracking number. The post office said it was delivered on the 26th. LMK.

Rob

[birkinsb]

Rob sorry I have located the bracket , the wife put it away with the extra Christmas presents . Thx for the quick response

[Hart_Rod]

Originally Posted by birkinsb

Rob sorry I have located the bracket , the wife put it away with the extra Christmas presents . Thx for the quick response

No worries, glad you found it!

[CJM72]

Rob,

Bought one of your brackets way back for my LQ9 (2006 Escalade) swap into a 1972 Blazer, but it isn't working out. Any recommendations based on the pictures below? The pedal part number appears to be correct for the Escalade, but the bolt pattern is more like the Vette pedal.

Probably should have double checked it before I powder coated it! Thanks

[Hart_Rod]

Originally Posted by CJM72

Rob,

Bought one of your brackets way back for my LQ9 (2006 Escalade) swap into a 1972 Blazer, but it isn't working out. Any recommendations based on the pictures below? The pedal part number appears to be correct for the Escalade, but the bolt pattern is more like the Vette pedal.

Probably should have double checked it before I powder coated it! Thanks
Attachment 1755543

Attachment 1755544

Attachment 1755545

CJ - Interesting, I have an 06 Tahoe motor and it has a different pedal than yours. It's a 5.3 motor so that could possible be the difference. Did you try just using the bottom hole and then bolting it in to see how it sits in the truck? Either that or you're going to have to drill 2 new holes to mount it. My apologies for the aggravation.

[2014sierraAT]

Originally Posted by CJM72

Rob,

Bought one of your brackets way back for my LQ9 (2006 Escalade) swap into a 1972 Blazer, but it isn't working out. Any recommendations based on the pictures below? The pedal part number appears to be correct for the Escalade, but the bolt pattern is more like the Vette pedal.

Probably should have double checked it before I powder coated it! Thanks
Attachment 1755543

Attachment 1755544

Attachment 1755545

We’re you ever able to get this bracket to work? I have the same pedal assembly, looking for a better mounting solution than what I have currently.

[SS68]

Originally Posted by CJM72

Rob,

Bought one of your brackets way back for my LQ9 (2006 Escalade) swap into a 1972 Blazer, but it isn't working out. Any recommendations based on the pictures below? The pedal part number appears to be correct for the Escalade, but the bolt pattern is more like the Vette pedal.

Probably should have double checked it before I powder coated it! Thanks
Attachment 1755543

Attachment 1755544

Attachment 1755545

Finally got around to installing the bracket and have ran into the same issue. Did drilling new holes solve your problem? I’ve thought about it but not liking the position of how it’ll sit

[2014sierraAT]

Originally Posted by SS68

Finally got around to installing the bracket and have ran into the same issue. Did drilling new holes solve your problem? I’ve thought about it but not liking the position of how it’ll sit

I had the same problem, I ended up having another plate welded to the bracket for the pedal assembly to bolt to, and cut off the plastic pedal and drilled a hole for the rod from a factory style pedal to slide into. It’s drilled/bolted and epoxied to the plastic base.