Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
07-21-2019, 02:08 AM | #1 | |
Registered User
Join Date: Sep 2017
Location: Lynnwood, WA
Posts: 148
|
Re: eBay steering column
Quote:
And I expected the response about the factory GM stuff. Of course the factory stuff in the bone yard is the original stuff and has been engineered for it's specific purpose. But how safe is a steering wheel from a wrecked truck? And what fits? I can tell you personal style I don't want a new-looking steering wheel and column from a 1990's Suburban or an S10. Besides, from an engineering standpoint, all aftermarket manufacturers start with a factory part to work from. For them to sell their parts they have to interchange with other GM parts. Crane couldn't very well sell cams and roller rockers if they didn't fit properly into the engine block they were designed for. And when it comes down to it, yes, I'm being cheap. I just spent $2k on engine work, another $750 in full exhaust, and hundreds of dollars in little parts to fix this or that thing. My interest mainly is in doing something once in the most affordable way, but also in a way that looks attractive to the truck and/or improves it's performance or functionality. I want the Ididit column, I truly do. I just don't know why it has to cost $600 when there are others that cost less than half. Answer that question and I'll delay my purchase until I have the cash. |
|
07-21-2019, 08:34 AM | #2 | |
Senior Member
Join Date: May 2007
Location: Doodah Kansas
Posts: 7,754
|
Re: eBay steering column
Quote:
https://lvvta.org.nz/documents/infos...ng_Columns.pdf believing you deserve a break from high prices because you have already spent a lot isnt really a good way to think about it, by the way. things cost what they cost. there are lots of budget tips on this forum and lots of guys that will help reduce costs of things that arent safety related, so dont get discouraged.
__________________
the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393 |
|
07-21-2019, 10:25 AM | #3 | |
Registered User
Join Date: Feb 2013
Location: Fallbrook California
Posts: 245
|
Re: eBay steering column
Quote:
|
|
07-21-2019, 02:03 PM | #4 | |
Registered User
Join Date: Sep 2017
Location: Lynnwood, WA
Posts: 148
|
Re: eBay steering column
Quote:
|
|
07-21-2019, 05:39 PM | #5 | |
Registered User
Join Date: Oct 2018
Location: Warsaw IN
Posts: 885
|
Re: eBay steering column
Quote:
|
|
07-21-2019, 06:02 PM | #6 | |
Registered User
Join Date: Sep 2017
Location: Lynnwood, WA
Posts: 148
|
Re: eBay steering column
Quote:
|
|
07-21-2019, 06:16 PM | #7 | |
Registered User
Join Date: Oct 2018
Location: Warsaw IN
Posts: 885
|
Re: eBay steering column
Quote:
|
|
07-21-2019, 04:08 PM | #8 | |
Senior Member
Join Date: Sep 2016
Location: Hershey, PA
Posts: 1,004
|
Re: eBay steering column
Quote:
1. GM harness shorted inside the column. I had to pull the wires and redo them all. 2. Tilt is loose. It shakes when I'm driving but still solid. 3. Play in the lower end where it joins the steering shaft. Seems to be a loose bearing. 4. Hazard switch broke, had to replace the inards. 5. No self-cancelling turn signal. Kind of annoying now that I don't have it. In hindsight, yes I'll be investing in a Flaming River or Ididit. The internal quality is what you're paying for.
__________________
Current Build Thread 1930 Ford Model A Modern Twist: Ford Model A Rat Rod With a Modern Twist Build Thread Phase 1 "The Swap": 1949 3100 with S10 swap. Beginner build with ambition! Build Thread Phase 2 "The Drop": Beginner Build with Ambition gets Air Ride |
|
Bookmarks |
Tags |
ebay, ifs, mii, steering column, u-joints |
|
|