Doing LS Swap - I have no idea what I'm doing!

[EagleChief]

Looking at this oil pan kit from Jegs: https://www.jegs.com/i/GM+Performanc...QAvD_BwE#qaTab

Anyone used it, or know for sure if it will fit in the trucks?

[ls1nova71]

Originally Posted by EagleChief

Looking at this oil pan kit from Jegs: https://www.jegs.com/i/GM+Performanc...QAvD_BwE#qaTab

Anyone used it, or know for sure if it will fit in the trucks?

I've used that pan in a couple of trucks. I make my own engine mounts, so take that into consideration, but it usually hangs down roughly 1/2" below the crossmember. That pan is about an inch to inch and a half or so shallower than the stock truck pan. You also won't be able to get both bottom bellhousing bolts to bolt into it, which is fine, so don't freak out about that.