Delay Wipers-use Ford switch and module?

[HO455]

Originally Posted by lutronjim

The video showed off,low & high. How does the switch control delay?

When you turn the wiper switch from off to low the wiper does one sweep and delays about 6 seconds.
Turn the switch to high and back to low and the wipers will sweep and delay about 3 seconds.
Turn the switch to high and back again and the delay will about 1.5 seconds.
Turn the switch again and the wipers will operate without delay in slow speed.
Turn the switch from off to high and the wipers operate in high speed as normal.
To go from off to slow with no delay turn switch to high and once the wipers start to operate turn switch to slow and they will operate in slow with no delay.
If your in slow and want to have a delay turn the switch to off and back and you will have minimum delay.
Another turn to off and back and you would have the 3 second delay.
It sounds a bit complicated but in real life I don't even think about it when I use the wipers.