![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#11 |
Senior Member
![]() Join Date: May 2007
Location: Doodah Kansas
Posts: 7,761
|
Re: 55.1 S10 swap Gypsum
front clip mounted, finished, very strong with the new mounts. did the column and brake pedal. i planned to use a speedway lower bearing on this one but the column shift lever did not respond to prying and so i just sanded the existing weld on the lower closeout till it was loose and rotated it to close out on the firewall. waste not want not. thats my 5 degree booster plate I make, it mounts the booster at 5 degree angle (right for the anti dive gm masters since about 1980), as well as being 16ga cold rolled really stiffens up the firewall once its welded in.
I have to install the little plate to close out the original column hole but thats later. more in next
__________________
the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393 |
![]() |
![]() |
Bookmarks |
|
|