Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
04-05-2024, 02:26 PM | #1 |
landarts
Join Date: May 2005
Location: Star, Idaho
Posts: 1,354
|
Re: Super Cheyenne aka the "Devil Cowboy"
Been spending a few hours a day here and there getting the firewall ready for primer and paint. Found one small area about 6" x 6" in the driver's side floorboard that will need rust repair attention before shooting the paint. Spent about 20 minutes with a needle scaler in the upper firewall wire channel to get any old cracking seam sealer out. Also got the piece of metal I cut out of the side of the firewall where the fender goes, welded in, filler and some primer.
Also have been ordering and picking up parts needed. New ram horn exhaust manifolds showed up yesterday for the motor in place of the old headers that were installed. I picked up the rebuilt Th350 transmission and the rebuilt NP205 transfercase. So glad I got them done after I saw what was wrong inside both of them. Good as new now! Pic 1 - Cut out to get paint sample Pic 2 - All patched up Pic 3 - Filler and primer done
__________________
Super Cheyenne aka the "Devil Cowboy" 71 K20 Idaho Edition 69 K10 from the Field 68 Second Chance Fix and Sale 72 GMC 3/4 ton 4x4 K2500 The "Fixrupr" build thread 72 Cheyenne 1/2 ton " FIXRUPR " - daily driver 67 C20 all original paint 71 K20 Custom 4x4 (Idaho Edition) 72 K20 GMC Super Custom 4x4 72 K20 Custom Deluxe 4x4 69 K10 Custom package 4x4 (69 K10 from the field) 72 K10 Custom 71 K10 Custom 72 K20 Custom Deluxe 4x4 72 K20 Crew Cab Project 71 GMC Jimmy CST 72 Blazer 70 Blazer |
Bookmarks |
|
|