The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-13-2024, 07:51 AM   #1
Ricks1971
Senior Member
 
Ricks1971's Avatar
 
Join Date: Mar 2006
Location: Clarkrange Tennessee
Posts: 1,787
Trim Parts

I am at the point with my truck looking to get her painted so I will need new emblems for my 1967 C10 so I was looking at trim parts for my emblems. Someone said these were billet emblems so has anyone used these emblems? thanks Rick
Ricks1971 is offline   Reply With Quote
Old 05-13-2024, 07:57 AM   #2
1970cstblazer
All stock and staying that way
 
1970cstblazer's Avatar
 
Join Date: Jul 2003
Location: Elkland, PA
Posts: 1,655
Lightbulb Re: Trim Parts

I have purchased all available emblems for my 1970 from them. They are the closest quality to original GM you can get. They are not low pressure castings, and the chrome quality and paint details are very good to excellent.
__________________
1970 K/5 Blazer CST 4WD, Medium Bronze, 93k ACT. miles, 350, 4 speed, rear positraction, 16.5" x 8.25" HD wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration finally getting close to completion..

1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor...

2017 Sierra 1500 SLT 4WD, Black, 45k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2...

2019 Canyon SLT 4WD, White, 62k miles, 3.6, 8L45, 3.23 LS, 18" wheels
1970cstblazer is offline   Reply With Quote
Old 05-13-2024, 02:02 PM   #3
cericd
Senior Member
 
cericd's Avatar
 
Join Date: Jan 2012
Location: Texan, back in TX
Posts: 2,158
Re: Trim Parts

I don't have experience with them personally but I have always seen people referring to them as "as close to OEM as possible without purchasing NOS emblems". However I have never seen them referred to as being billet. Also, the 1969-72 Chevrolet Truck Glove Box Door "Chevrolet Custom" Emblem is not correct. The font used for CHEVROLET is slightly different and should be painted silver instead of being black. That being said, I would likely use them for the 69-70 hood bowtie and C/10 emblems on my truck if I decided to replace the originals.

Original glovebox emblem, then Trim Parts version. Some folks may not notice, or care but...
Attached Images
  
__________________
Chris

My 1970 SWB C/10 - https://67-72chevytrucks.com/vboard/...d.php?t=534872
cericd is offline   Reply With Quote
Old 05-13-2024, 02:06 PM   #4
1970cstblazer
All stock and staying that way
 
1970cstblazer's Avatar
 
Join Date: Jul 2003
Location: Elkland, PA
Posts: 1,655
Exclamation Re: Trim Parts

That one is pretty bad. It should be brought to their attention.

Their CST emblem looks good.

__________________
1970 K/5 Blazer CST 4WD, Medium Bronze, 93k ACT. miles, 350, 4 speed, rear positraction, 16.5" x 8.25" HD wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration finally getting close to completion..

1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor...

2017 Sierra 1500 SLT 4WD, Black, 45k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2...

2019 Canyon SLT 4WD, White, 62k miles, 3.6, 8L45, 3.23 LS, 18" wheels
1970cstblazer is offline   Reply With Quote
Old 05-15-2024, 10:22 AM   #5
1970cstblazer
All stock and staying that way
 
1970cstblazer's Avatar
 
Join Date: Jul 2003
Location: Elkland, PA
Posts: 1,655
Exclamation Re: Trim Parts

IF this is a true NOS GM part as the listing states, then there were two variations of this emblem...

3999821



https://www.ebay.com/itm/13496179814...Bk9SR-7j0cnvYw
__________________
1970 K/5 Blazer CST 4WD, Medium Bronze, 93k ACT. miles, 350, 4 speed, rear positraction, 16.5" x 8.25" HD wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration finally getting close to completion..

1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor...

2017 Sierra 1500 SLT 4WD, Black, 45k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2...

2019 Canyon SLT 4WD, White, 62k miles, 3.6, 8L45, 3.23 LS, 18" wheels
1970cstblazer is offline   Reply With Quote
Old 05-15-2024, 10:36 AM   #6
cericd
Senior Member
 
cericd's Avatar
 
Join Date: Jan 2012
Location: Texan, back in TX
Posts: 2,158
Re: Trim Parts

I saw that the other day and would have bought it but I am very skeptical. The font for CHEVROLET is not the same as the factory installed ones nor is it the same as the Trim Parts piece, i.e. look at how wide the opening in the “R” is. Also, I’ve never seen an actual GM Part come in blue and white box AND be in a clear plastic bag. I don’t believe I’ve seen a genuine GM part come in a plastic bag that doesn’t have blue sections with the GM logo and part number printed on it. Seems like an aftermarket part and a GM box. That is, if the box is even original since they don’t show the part number or GM logo.
__________________
Chris

My 1970 SWB C/10 - https://67-72chevytrucks.com/vboard/...d.php?t=534872

Last edited by cericd; 05-15-2024 at 10:43 AM.
cericd is offline   Reply With Quote
Old 05-15-2024, 11:07 AM   #7
1970cstblazer
All stock and staying that way
 
1970cstblazer's Avatar
 
Join Date: Jul 2003
Location: Elkland, PA
Posts: 1,655
Arrow Re: Trim Parts

Here are unrestored Customs with the glovebox emblem with the black lettering:





__________________
1970 K/5 Blazer CST 4WD, Medium Bronze, 93k ACT. miles, 350, 4 speed, rear positraction, 16.5" x 8.25" HD wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration finally getting close to completion..

1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor...

2017 Sierra 1500 SLT 4WD, Black, 45k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2...

2019 Canyon SLT 4WD, White, 62k miles, 3.6, 8L45, 3.23 LS, 18" wheels
1970cstblazer is offline   Reply With Quote
Old 05-15-2024, 07:31 PM   #8
cericd
Senior Member
 
cericd's Avatar
 
Join Date: Jan 2012
Location: Texan, back in TX
Posts: 2,158
Re: Trim Parts

Well, that makes it a little more interesting since those match the one currently on eBay. I wonder if there was a certain time they swapped over to the black style. Mine is a 70 built of course in 69.
__________________
Chris

My 1970 SWB C/10 - https://67-72chevytrucks.com/vboard/...d.php?t=534872
cericd is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:58 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com