I Got It!!! - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*Gee_Emm* · 10-02-2004, 03:27 PM

You might want to consider the 200-4r instead of the 700r4. The 2004r is the same length as your 3 speed so you won't have to get a new drive shaft made.

Trifelynn · 10-02-2004, 04:12 PM

What is a 2004R?

Manual?

I don't want to have a hole in the floor board...

I have a good driveshaft guy...

Did my driveshaft on my jeep...
which I will also post a picture of....so all you 4x4 guys can drool as well

*Gee_Emm* · 10-02-2004, 04:46 PM

It is an automatic with overdrive.

Trifelynn · 10-02-2004, 05:57 PM

What is the difference between a 2004r and a 700R4?

Trifelynn · 10-02-2004, 06:09 PM

It says the pics are too big....

how do I shrink them?

I haev a few, so if you tell me, I won't have to send them to someone

bouncytruck · 10-02-2004, 06:31 PM

Do you have photoshop or some other image editing program? You can also upload them to one of the photo sites and link the images to this site.

Trifelynn · 10-02-2004, 06:34 PM

I have paint...?

and what is the name of one of the websites?

Trifelynn · 10-02-2004, 06:46 PM

'95 YJ Wrangler

Trifelynn · 10-02-2004, 06:51 PM

'71 2wd Blazer

Trifelynn · 10-02-2004, 06:53 PM

a few more...

LUV2XCLR8 · 10-02-2004, 06:53 PM

PIC'S

Trifelynn · 10-02-2004, 06:56 PM

and a few more...

I suppose that is it for now...unless someone wants to see a specific picture?

sorry for the wait guys

Trifelynn · 10-02-2004, 06:57 PM

oh, and sorry, for the crappy resolution...

like I said, it is a shi-tAy camera.....<shrug>

LUV2XCLR8 · 10-02-2004, 06:59 PM

DON'T WORRY ABOUT RESOLUTION, JUST REMEMBER IT'S A BLAZER, WELCOME 2 THE FAMILY.

Trifelynn · 10-02-2004, 07:02 PM

Thanks...I can't wait to start tearing her apart

bouncytruck · 10-02-2004, 07:19 PM

Excellent. Are you going to customize it or build it stock?

Trifelynn · 10-02-2004, 07:25 PM

probably a little of both.

I want to bag it...
put a 67 front clip on it...
shave a few things(parking lights in the rear{'67 front will take care of front})...
but I want to generally keep the body stock....

frost89434 · 10-03-2004, 12:47 PM

Sounds like you have a good plan

Trifelynn · 10-03-2004, 09:17 PM

plan and getting there seems to be a lot different

There is so many things to think about...and do...

It gets hard to see through til the end...
especially because this is my first time doing this

DMNCLNR · 10-04-2004, 12:09 AM

Hopefully i can get mine down here, and we can kind of compare progress... This will also be my first time. I want to bag it, but thats not going to happen too soon! I just want a rolling proj. Ill prolly lower it, put some nice primer on it, and get some fatty rims!

*Gee_Emm* · 10-04-2004, 01:46 PM

Cool.

On the rear wheel tub on the drivers side there looks like there is a sticker there, is it all there and if so could you post a pic of it?

Trifelynn · 10-04-2004, 02:21 PM

are you talking to me Gee Emm?

*Gee_Emm* · 10-04-2004, 02:36 PM

Yah, in the last pic, it looks like the jack instruction sticker is still there.

Trifelynn · 10-04-2004, 02:50 PM

I just went and looked...there is white stuff where there was a sticker....
but nothing there anymore <shrug>

10-02-2004, 04:12 PM	#27
Trifelynn Registered User Join Date: May 2004 Location: Williston, North Dakota Posts: 469	What is a 2004R? Manual? I don't want to have a hole in the floor board... I have a good driveshaft guy... Did my driveshaft on my jeep... which I will also post a picture of....so all you 4x4 guys can drool as well __________________ Always looking for a 2wd blazer

10-02-2004, 05:57 PM	#29
Trifelynn Registered User Join Date: May 2004 Location: Williston, North Dakota Posts: 469	What is the difference between a 2004r and a 700R4? __________________ Always looking for a 2wd blazer

10-02-2004, 06:09 PM	#30
Trifelynn Registered User Join Date: May 2004 Location: Williston, North Dakota Posts: 469	It says the pics are too big.... how do I shrink them? I haev a few, so if you tell me, I won't have to send them to someone __________________ Always looking for a 2wd blazer

10-02-2004, 06:31 PM	#31
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,049	Do you have photoshop or some other image editing program? You can also upload them to one of the photo sites and link the images to this site. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

10-02-2004, 06:34 PM	#32
Trifelynn Registered User Join Date: May 2004 Location: Williston, North Dakota Posts: 469	I have paint...? and what is the name of one of the websites? __________________ Always looking for a 2wd blazer

10-02-2004, 03:27 PM	#26
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 4,002	You might want to consider the 200-4r instead of the 700r4. The 2004r is the same length as your 3 speed so you won't have to get a new drive shaft made.

10-02-2004, 04:46 PM	#28
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 4,002	It is an automatic with overdrive.

10-02-2004, 06:46 PM	#33
Trifelynn Registered User Join Date: May 2004 Location: Williston, North Dakota Posts: 469	Here is my jeep '95 YJ Wrangler __________________ Always looking for a 2wd blazer

10-02-2004, 06:51 PM	#34
Trifelynn Registered User Join Date: May 2004 Location: Williston, North Dakota Posts: 469	Here is my Blazer '71 2wd Blazer __________________ Always looking for a 2wd blazer

10-02-2004, 06:53 PM	#35
Trifelynn Registered User Join Date: May 2004 Location: Williston, North Dakota Posts: 469	'71 Blazer a few more... __________________ Always looking for a 2wd blazer

10-02-2004, 06:53 PM	#36
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,470	PIC'S __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

10-02-2004, 06:56 PM	#37
Trifelynn Registered User Join Date: May 2004 Location: Williston, North Dakota Posts: 469	'71 blazer and a few more... I suppose that is it for now...unless someone wants to see a specific picture? sorry for the wait guys __________________ Always looking for a 2wd blazer

10-02-2004, 06:57 PM	#38
Trifelynn Registered User Join Date: May 2004 Location: Williston, North Dakota Posts: 469	oh, and sorry, for the crappy resolution... like I said, it is a shi-tAy camera.....<shrug> __________________ Always looking for a 2wd blazer

10-02-2004, 06:59 PM	#39
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,470	DON'T WORRY ABOUT RESOLUTION, JUST REMEMBER IT'S A BLAZER, WELCOME 2 THE FAMILY. __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

10-02-2004, 07:02 PM	#40
Trifelynn Registered User Join Date: May 2004 Location: Williston, North Dakota Posts: 469	Thanks...I can't wait to start tearing her apart __________________ Always looking for a 2wd blazer



Register or Log In To remove these advertisements.

10-02-2004, 07:19 PM	#41
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,049	Excellent. Are you going to customize it or build it stock? __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

10-02-2004, 07:25 PM	#42
Trifelynn Registered User Join Date: May 2004 Location: Williston, North Dakota Posts: 469	probably a little of both. I want to bag it... put a 67 front clip on it... shave a few things(parking lights in the rear{'67 front will take care of front})... but I want to generally keep the body stock.... __________________ Always looking for a 2wd blazer

10-03-2004, 12:47 PM	#43
frost89434 Registered User Join Date: Nov 2001 Location: sparks, NV Posts: 1,141	Sounds like you have a good plan __________________ 68 short fleet with 71 front clip 2wd jaguar blue 99 chevy ext cab shrtbed z71 loaded 99 chevy swb fleetside(daily driver) Sparks, Nevada

10-03-2004, 09:17 PM	#44
Trifelynn Registered User Join Date: May 2004 Location: Williston, North Dakota Posts: 469	plan and getting there seems to be a lot different There is so many things to think about...and do... It gets hard to see through til the end... especially because this is my first time doing this __________________ Always looking for a 2wd blazer

10-04-2004, 12:09 AM	#45
DMNCLNR Registered User Join Date: Jun 2004 Location: Orange County Cali Posts: 258	Hopefully i can get mine down here, and we can kind of compare progress... This will also be my first time. I want to bag it, but thats not going to happen too soon! I just want a rolling proj. Ill prolly lower it, put some nice primer on it, and get some fatty rims! __________________ 64 caravelle camper 58 Vert bug 64 SS nova for sale 14k http://www.stevesnovasite.com/forums...ad.php?t=46362 Wanted: any early V.Ws any condition!

10-04-2004, 01:46 PM	#46
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 4,002	Cool. On the rear wheel tub on the drivers side there looks like there is a sticker there, is it all there and if so could you post a pic of it?

10-04-2004, 02:21 PM	#47
Trifelynn Registered User Join Date: May 2004 Location: Williston, North Dakota Posts: 469	are you talking to me Gee Emm? __________________ Always looking for a 2wd blazer

10-04-2004, 02:36 PM	#48
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 4,002	Yah, in the last pic, it looks like the jack instruction sticker is still there.

10-04-2004, 02:50 PM	#49
Trifelynn Registered User Join Date: May 2004 Location: Williston, North Dakota Posts: 469	I just went and looked...there is white stuff where there was a sticker.... but nothing there anymore <shrug> __________________ Always looking for a 2wd blazer

Register or Log In To remove these advertisements.