silver bullet - Page 10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kyull67 · 10-06-2008, 12:12 PM

I'm jealous.

revn67 · 10-06-2008, 12:22 PM

this is definitely an extremely clean and well done badass truck!!!! congrats on the finishing of the project and im sure you'll have loads of fun spinning them fatties and watching people stare at your truck....ya just gave me more motivation to get my project going ASAP!

abadsvt · 10-06-2008, 12:54 PM

Sweet Truck!!!! Very clean and love the wood in the bed!!

Josh

rustSpot · 10-08-2008, 12:22 AM

Dig it for sure. Sounds and looks killer! So, I checked all the post and didnt see a posting for the backspace on the 20x15's. Just wondering what fit under the stepside and inside the frame rails with the stock rear end 12 bolt narrowed 5 inches. Thanks in advance.

724x4a/cchevy · 10-08-2008, 09:23 AM

I'm ready to see how those bowtie front turn signals look installed!!

**ERIK D** · 10-08-2008, 07:25 PM

Quote:

Originally Posted by 724x4a/cchevy

I'm ready to see how those bowtie front turn signals look installed!!

HERE YOU GO MY FRIEND!!

YouTube - ERIKO 67 CHEVY

msgross · 10-08-2008, 07:49 PM

been said already but... sweet truck...

is the front trim chromed or stock?

Inthuwind · 10-08-2008, 07:53 PM

Da%$ that's awesome!!

clemson71guy · 10-08-2008, 08:02 PM

wow that is awsome
hope to see you and your truck at some car shows around here.

**ERIK D** · 10-08-2008, 08:42 PM

Quote:

Originally Posted by msgross

been said already but... Sweet truck...

Is the front trim chromed or stock?

stock

**ERIK D** · 10-08-2008, 09:00 PM

Quote:

Originally Posted by rustspot

dig it for sure. Sounds and looks killer! So, i checked all the post and didnt see a posting for the backspace on the 20x15's. Just wondering what fit under the stepside and inside the frame rails with the stock rear end 12 bolt narrowed 5 inches. Thanks in advance.

u still gonna have to modify the frame to fit wide wheels,otherwise u can only fit a 13in wheel

big_al_71 · 10-12-2008, 09:31 PM

This truck is definetly out of control nice, I would be afraid to drive that beauty on the street. Main reason I am not building my truck this magnificient.

724x4a/cchevy · 10-12-2008, 09:52 PM

Quote:

Originally Posted by ERIK D

HERE YOU GO MY FRIEND!!

Let me/us know when it makes it into the magazines so that i can say I had a tiny part in the success

best stepside ever
724x4a/cchevy

71'tahoe · 11-16-2008, 11:53 PM

Simply beautiful....Love it!!

**ERIK D** · 11-17-2008, 06:16 PM

Thank you guys.
The truck is getting the interior done at lake norman interiors as we speak.
Should have some pictures in about 2 weeks or so.

Painter D · 11-17-2008, 06:36 PM

I'm sure this is nothing new to you, the quality of your truck is outstanding.

Well done, keep at it.

higgiec10 · 11-19-2008, 01:38 AM

nice work time and money and we can all have it nice truck

**ERIK D** · 12-17-2008, 05:04 PM

Interior progress

**ERIK D** · 12-17-2008, 05:12 PM

Some more

killer71 · 12-17-2008, 10:14 PM

Nice Progress!!!

LUV2XCLR8 · 12-18-2008, 03:27 PM

Sweet

**ERIK D** · 12-29-2008, 08:55 PM

Few more

gcburdic · 12-29-2008, 09:32 PM

DA-am!!!....It's lookin saweet!!....

Hey Erik, did you get anything powder coated locally??...if so, could you recommend someone for me...I got hood hinges I'd like to get done!....

When is that thing gonna be rollin'...I finally got mine home....we should cruise!

killer71 · 12-29-2008, 09:37 PM

hey bullet can i ask u a crazy question??? how wide is the lip on your rear wheels?

**ERIK D** · 01-01-2009, 08:44 PM

[QUOTE=gcburdic;3053747]DA-am!!!....It's lookin saweet!!....

Hey Erik, did you get anything powder coated locally??...if so, could you recommend someone for me...I got hood hinges I'd like to get done!....

When is that thing gonna be rollin'...I finally got mine home....we should cruise![/QUO

the powder coating place is in denver,nc.
i ll get u the number monday.
the bullet should be ready by the end of feb,then we should ride.

10-06-2008, 12:12 PM	#226
kyull67 Registered User Join Date: Nov 2006 Location: Springfield/Kansas City Posts: 1,842	Re: silver bullet I'm jealous. __________________ The first '67 The current '67 '63 Biscayne

10-06-2008, 12:22 PM	#227
revn67 Registered User Join Date: Jul 2005 Location: east longmeadow, MA Posts: 540	Re: silver bullet this is definitely an extremely clean and well done badass truck!!!! congrats on the finishing of the project and im sure you'll have loads of fun spinning them fatties and watching people stare at your truck....ya just gave me more motivation to get my project going ASAP! __________________ 67 small windowed,shortbed,fleetside, sbc 327, th350,12 bolt :under the knife: 71 cab for sale in parts classifieds! 2004 black chevy 1500 "finish your beer, theres sober kids in india!"

10-06-2008, 12:54 PM	#228
abadsvt Senior Member Join Date: Aug 2006 Location: Atascadero, CA Posts: 1,152	Re: silver bullet Sweet Truck!!!! Very clean and love the wood in the bed!! Josh __________________ (Project truck) 1970 C10 under complete transformation My current build thread http://67-72chevytrucks.com/vboard/s...d.php?t=212871 Other project: C5 corvette swap into 70 c10 http://67-72chevytrucks.com/vboard/s...=1#post2413517 On Hold

10-08-2008, 12:22 AM	#229
rustSpot NO REGRETS Join Date: Oct 2006 Location: Rockwall, Texas Posts: 498	Re: silver bullet Dig it for sure. Sounds and looks killer! So, I checked all the post and didnt see a posting for the backspace on the 20x15's. Just wondering what fit under the stepside and inside the frame rails with the stock rear end 12 bolt narrowed 5 inches. Thanks in advance. Last edited by rustSpot; 10-08-2008 at 02:27 AM.

10-08-2008, 09:23 AM	#230
724x4a/cchevy Self-proclaimed LED man Join Date: Nov 2003 Location: Harrisburg, Missouri Posts: 1,021	Re: silver bullet I'm ready to see how those bowtie front turn signals look installed!! __________________ My LED Website My Photobucket Album of LED's Ask me about hand-made custom L.E.D brake and reverse lights. <- LINK I also do LED: -Third Brake/Cargo -Brake (truck and burb) -Reverse (truck and burb) -67-68 Front Turn Signals -69-70 Front Turn Signals -71-72 Front Turn Signals -GMC Front Turn Signals I can also do custom lights for other vehicles....i did a set for a AMC Gremlin once Norwood Survivor

10-08-2008, 07:49 PM	#232
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: silver bullet been said already but... sweet truck... is the front trim chromed or stock? __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

10-08-2008, 07:53 PM	#233
Inthuwind Straight jacket required Join Date: Oct 2003 Location: OKC, OK Posts: 882	Re: silver bullet Da%$ that's awesome!! __________________ 1968 C10 Short Stepper 350/350 A/C P/S P/B Front disc 3/5 static/ 12bolt rear 3:73 1979 Pontiac Trans Am 10th Anniversary/455/4spd 2011 H-D Street Glide - CAMMED n lowered Dad always said,"Son, if you can't be good...be good at it."

10-08-2008, 08:02 PM	#234
clemson71guy Registered User Join Date: Oct 2007 Location: north carolina Posts: 470	Re: silver bullet wow that is awsome hope to see you and your truck at some car shows around here.

10-12-2008, 09:31 PM	#237
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: silver bullet This truck is definetly out of control nice, I would be afraid to drive that beauty on the street. Main reason I am not building my truck this magnificient. __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

11-16-2008, 11:53 PM	#239
71'tahoe Registered User Join Date: Feb 2004 Location: lynchburg ohio Posts: 736	Re: silver bullet Simply beautiful....Love it!!

11-17-2008, 06:16 PM	#240
ERIK D Registered User Join Date: Feb 2007 Location: EAGLE PASS,TX Posts: 269	Re: silver bullet Thank you guys. The truck is getting the interior done at lake norman interiors as we speak. Should have some pictures in about 2 weeks or so. __________________ MY BUILD http://www.67-72chevytrucks.com/vboa...d.php?t=282815

11-17-2008, 06:36 PM	#241
Painter D Registered User Join Date: Jun 2007 Location: DFW (Forney) Posts: 1,529	Re: silver bullet I'm sure this is nothing new to you, the quality of your truck is outstanding. Well done, keep at it. __________________ '58 SWB Fleetside...Front & Rear Porterbuilt Dropmember, 6.0 LS /4L60E. Accuair E-level, 20 Billet Specialties (Vintecs) '63 Buick Riviera ... AccuAir E-level, 20" Billet Specialties (Vintecs) http://67-72chevytrucks.com/vboard/s...=528853&page=5 Last edited by Painter D; 11-17-2008 at 06:37 PM.

11-19-2008, 01:38 AM	#242
higgiec10 Registered User Join Date: Dec 2005 Location: baytown Posts: 243	Re: silver bullet nice work time and money and we can all have it nice truck

12-17-2008, 05:04 PM	#243
ERIK D Registered User Join Date: Feb 2007 Location: EAGLE PASS,TX Posts: 269	Re: silver bullet Interior progress Attached Images __________________ MY BUILD http://www.67-72chevytrucks.com/vboa...d.php?t=282815

12-17-2008, 05:12 PM	#244
ERIK D Registered User Join Date: Feb 2007 Location: EAGLE PASS,TX Posts: 269	Re: silver bullet Some more Attached Images __________________ MY BUILD http://www.67-72chevytrucks.com/vboa...d.php?t=282815



Register or Log In To remove these advertisements.

12-17-2008, 10:14 PM	#245
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: silver bullet Nice Progress!!! __________________ R.I.P. Killer 71 10/26/07

12-18-2008, 03:27 PM	#246
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	Re: silver bullet Sweet __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

12-29-2008, 08:55 PM	#247
ERIK D Registered User Join Date: Feb 2007 Location: EAGLE PASS,TX Posts: 269	Re: silver bullet Few more Attached Images __________________ MY BUILD http://www.67-72chevytrucks.com/vboa...d.php?t=282815

12-29-2008, 09:32 PM	#248
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: silver bullet DA-am!!!....It's lookin saweet!!.... Hey Erik, did you get anything powder coated locally??...if so, could you recommend someone for me...I got hood hinges I'd like to get done!.... When is that thing gonna be rollin'...I finally got mine home....we should cruise! __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

12-29-2008, 09:37 PM	#249
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: silver bullet hey bullet can i ask u a crazy question??? how wide is the lip on your rear wheels? __________________ R.I.P. Killer 71 10/26/07

01-01-2009, 08:44 PM	#250
ERIK D Registered User Join Date: Feb 2007 Location: EAGLE PASS,TX Posts: 269	Re: silver bullet [QUOTE=gcburdic;3053747]DA-am!!!....It's lookin saweet!!.... Hey Erik, did you get anything powder coated locally??...if so, could you recommend someone for me...I got hood hinges I'd like to get done!.... When is that thing gonna be rollin'...I finally got mine home....we should cruise![/QUO the powder coating place is in denver,nc. i ll get u the number monday. the bullet should be ready by the end of feb,then we should ride. __________________ MY BUILD http://www.67-72chevytrucks.com/vboa...d.php?t=282815

Register or Log In To remove these advertisements.