The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1969 - 1972 Blazers and Jimmys Message Board > 1969 - 1972 Blazers and Jimmys Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-02-2018, 12:47 AM   #226
mcmlxix
Collector of Projects
 
mcmlxix's Avatar
 
Join Date: Apr 2003
Location: Las Vegas
Posts: 3,106
Re: New to me 1972 K5

Quote:
Originally Posted by boynton View Post
What accessories are you running on your motor and did you use the stock brackets?
Stock brackets with a remote reservoir power steering pump for the hydro-boost. No AC but Holley makes a bracket for the smaller aftermarket Sandon compressor. I may add AC later...but I planned to go soft top or just bikini top..
__________________
Rich
1972 K5 Blazer CST Click HERE

D60 BIG BRAKE UPGRADE Click HERE
mcmlxix is offline   Reply With Quote
Old 02-08-2019, 08:46 AM   #227
mcmlxix
Collector of Projects
 
mcmlxix's Avatar
 
Join Date: Apr 2003
Location: Las Vegas
Posts: 3,106
Re: New to me 1972 K5

I hope to bring the truck home from the body guy (aka free storage place) this weekend. I still need to plumb brake and fuel lines. Finish wiring and fire it up. It will need a front drive shaft and the transfer case shifters installed as well. Once it running I'll work on custom bumpers and maybe a roll bar... (it sill has the small tires on the rear in these pictures)
Attached Images
  
__________________
Rich
1972 K5 Blazer CST Click HERE

D60 BIG BRAKE UPGRADE Click HERE
mcmlxix is offline   Reply With Quote
Old 02-08-2019, 09:03 AM   #228
mcmlxix
Collector of Projects
 
mcmlxix's Avatar
 
Join Date: Apr 2003
Location: Las Vegas
Posts: 3,106
Re: New to me 1972 K5

One of the extras I picked up over the Christmas holiday was a billet dash bezel from Ringbrothers. I had covered a repop plastic dash bezel in Line-X but wasn't happy with the look. I will have the new one powder coated along with the glove box door. They will match and the texture will similar to the OE bezel in a wrinkle black powder coat. This will hold my Dakota Digital gauges.
Attached Images
    
__________________
Rich
1972 K5 Blazer CST Click HERE

D60 BIG BRAKE UPGRADE Click HERE
mcmlxix is offline   Reply With Quote
Old 02-08-2019, 12:15 PM   #229
3757chevy
Senior Member

 
3757chevy's Avatar
 
Join Date: Mar 2016
Location: Near Canon City ,Colorado
Posts: 4,019
Re: New to me 1972 K5

Quote:
Originally Posted by mcmlxix View Post
One of the extras I picked up over the Christmas holiday was a billet dash bezel from Ringbrothers. I had covered a repop plastic dash bezel in Line-X but wasn't happy with the look. I will have the new one powder coated along with the glove box door. They will match and the texture will similar to the OE bezel in a wrinkle black powder coat. This will hold my Dakota Digital gauges.
Dat's Nice.
__________________
'35 1/2 ton Pickup (bought 2020) '68 C10 Suburban (bought 2021) '72 K5 Blazer (bought 2013)
'67 Stepside (bought 1997-sold 2021) '96 Bronco Eddie Bauer (inherited 2010)
My 1st day here-'67 C10(sold)and '72 K5 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=702056
MIKE
3757chevy is offline   Reply With Quote
Old 02-08-2019, 12:46 PM   #230
MTCK
Registered User
 
MTCK's Avatar
 
Join Date: Dec 2009
Location: Fairbanks, AK
Posts: 1,830
Re: New to me 1972 K5

Looks great. It’s been a journey...
__________________
-Marcus

1991 V3500 L29 454 4L80E NP205 D60/14 Bolt 4.56's
1984 K30 292 TH400 NP205 D60/14 Bolt 4.56's flat bed 7'6" Meyer Plow
2022 Silverado 3500 L8T
Project Daily Driver
Project Heavy Hauler
Project Plow Truck
MTCK is offline   Reply With Quote
Old 05-03-2019, 08:31 PM   #231
mcmlxix
Collector of Projects
 
mcmlxix's Avatar
 
Join Date: Apr 2003
Location: Las Vegas
Posts: 3,106
Re: New to me 1972 K5

Its home... finally. I'll post some pictures later
__________________
Rich
1972 K5 Blazer CST Click HERE

D60 BIG BRAKE UPGRADE Click HERE
mcmlxix is offline   Reply With Quote
Old 08-07-2019, 04:36 AM   #232
mcmlxix
Collector of Projects
 
mcmlxix's Avatar
 
Join Date: Apr 2003
Location: Las Vegas
Posts: 3,106
Re: New to me 1972 K5

Got it.
Cleaned out all the parts that were packed in the bed for transport.
Pulled the chassis and engine harness. I want to move the ECU under the hood.
I also had a local fab shop build some bolt on front shock hoops and an engine cross member...

I have some NiCopp lines for fuel deliver and brake lines that I need to straighten, bend to fit and install... but its been 110* one average... probably hotter in the garage...
Attached Images
    
__________________
Rich
1972 K5 Blazer CST Click HERE

D60 BIG BRAKE UPGRADE Click HERE
mcmlxix is offline   Reply With Quote
Old 08-07-2019, 11:10 AM   #233
MTCK
Registered User
 
MTCK's Avatar
 
Join Date: Dec 2009
Location: Fairbanks, AK
Posts: 1,830
Re: New to me 1972 K5

Nice. Looks good and I’m sure it feels good to be back in possession of your rig.
__________________
-Marcus

1991 V3500 L29 454 4L80E NP205 D60/14 Bolt 4.56's
1984 K30 292 TH400 NP205 D60/14 Bolt 4.56's flat bed 7'6" Meyer Plow
2022 Silverado 3500 L8T
Project Daily Driver
Project Heavy Hauler
Project Plow Truck
MTCK is offline   Reply With Quote
Old 08-22-2019, 04:30 AM   #234
mcmlxix
Collector of Projects
 
mcmlxix's Avatar
 
Join Date: Apr 2003
Location: Las Vegas
Posts: 3,106
Re: New to me 1972 K5

I pulled engine harness and main harness as I didn't like the way everything was routed.
I remounted the fuse panel and ordered some flange mount Deutsch connectors to run the rear light harness and front light harness through the firewall separately.

I also ordered NiCopp line, 3/8 for fuel and 3/16 for brake line. I plan on using factory style connectors at the fuel rail and tank by converting from the NiCopp like to OEM nylon fuel line with GM connectors.
Attached Images
    
__________________
Rich
1972 K5 Blazer CST Click HERE

D60 BIG BRAKE UPGRADE Click HERE
mcmlxix is offline   Reply With Quote
Old 08-22-2019, 04:37 AM   #235
mcmlxix
Collector of Projects
 
mcmlxix's Avatar
 
Join Date: Apr 2003
Location: Las Vegas
Posts: 3,106
Re: New to me 1972 K5

I eliminated the factory trim on the tailgate and tail lights. I broke down and ordered some American Billet tail light bezels. If you're not using factory trim, these are awesome...
Attached Images
    
__________________
Rich
1972 K5 Blazer CST Click HERE

D60 BIG BRAKE UPGRADE Click HERE
mcmlxix is offline   Reply With Quote
Old 08-22-2019, 01:17 PM   #236
Green Monster
Registered User
 
Green Monster's Avatar
 
Join Date: Mar 2006
Location: Malvern, PA
Posts: 951
Re: New to me 1972 K5

Looks good. The black trim is a nice modern look with the LEDs and white paint.
Green Monster is offline   Reply With Quote
Old 08-27-2019, 03:11 AM   #237
mcmlxix
Collector of Projects
 
mcmlxix's Avatar
 
Join Date: Apr 2003
Location: Las Vegas
Posts: 3,106
Re: New to me 1972 K5

Still working on the new AAW builder harness. I decided to rotate the fuse panel 90* and installed the flange mount Deutsch connectors. One used a factory hole and follows a crease in the firewall. I mounted the second one next to it and each connector has 8 pinouts. One block will be for the rear light harness and maybe the fuel level sender. The other block will be for the front light harness... (the under dash pic is sideways)

I also collected the NiCopp 3/8 fuel line, compression fittings and some OEM style "repair" kits to convert to factory nylon flex line at the fuel rails and fuel pump module. I want to add an inline fuel filter. I will probably use WIX filter 33193 from a 1996 Impala SS that uses the same GM quick connections.
Attached Images
     
__________________
Rich
1972 K5 Blazer CST Click HERE

D60 BIG BRAKE UPGRADE Click HERE

Last edited by mcmlxix; 08-27-2019 at 03:40 AM.
mcmlxix is offline   Reply With Quote
Old 12-02-2019, 11:33 AM   #238
cornerstone
Registered User
 
cornerstone's Avatar
 
Join Date: Apr 2014
Location: Azle,Texas
Posts: 2,248
Re: New to me 1972 K5

Awesome build man! Any more updates to share?
__________________
Brian


1972 C10, "Loyd", LWB to SWB, 5.3, L83/6L80e, 4:11 Tru Trac, Air Ride, VA, DD, 20" Coys, 4 wheel disc, A quick LS swap turned into a 6 year frame off resto-mod.
cornerstone is offline   Reply With Quote
Old 12-04-2019, 11:34 AM   #239
mcmlxix
Collector of Projects
 
mcmlxix's Avatar
 
Join Date: Apr 2003
Location: Las Vegas
Posts: 3,106
Re: New to me 1972 K5

Figured out where I want to mount the ECM. I have a plastic tray from GM that's bolted to the core support with some spacers and temporary bolts to sit square. I'm going to need to modify the harness for length and position as its running up in the fender and not long enough to reach everything....
Attached Images
 
__________________
Rich
1972 K5 Blazer CST Click HERE

D60 BIG BRAKE UPGRADE Click HERE
mcmlxix is offline   Reply With Quote
Old 12-04-2019, 07:26 PM   #240
lyrikz
PITbut
 
lyrikz's Avatar
 
Join Date: Sep 2007
Location: monroe washington
Posts: 3,052
Re: New to me 1972 K5

Nevermind, i see you mounted the shocks in a different area. Thats neat.
__________________
New project. 1971 Twin Turbo blazer

http://67-72chevytrucks.com/vboard/s...d.php?t=676047


My new YOUTUBE channel.. Videos of my truck and a current walk around.
Lyrikz74 Youtube channel DONE! SOLD!

My 1971 stepside build thread
My Build Thread UPDATED 6/11. DONE
and sold.
lyrikz is offline   Reply With Quote
Old 12-04-2019, 09:14 PM   #241
CG
BlahBlahBlah
 
Join Date: Feb 2002
Location: Wa.
Posts: 19,980
Re: New to me 1972 K5

Quote:
Originally Posted by lyrikz View Post
Nevermind, i see you mounted the shocks in a different area. Thats neat.
Welcome back Del? Haven't seen you post in a long time. I supposed I coulda just missed it =)
__________________
… … … … … … … … ... … … … … … … … … … … …
CG is offline   Reply With Quote
Old 12-05-2019, 11:17 AM   #242
lyrikz
PITbut
 
lyrikz's Avatar
 
Join Date: Sep 2007
Location: monroe washington
Posts: 3,052
Re: New to me 1972 K5

Quote:
Originally Posted by CG View Post
Welcome back Del? Haven't seen you post in a long time. I supposed I coulda just missed it =)
No, i left for a few years. Moved. But also, i had zero action on my posts so i just figured no one cared so i stopped posting. Its going back together now and the shell is being painted as we speak.
__________________
New project. 1971 Twin Turbo blazer

http://67-72chevytrucks.com/vboard/s...d.php?t=676047


My new YOUTUBE channel.. Videos of my truck and a current walk around.
Lyrikz74 Youtube channel DONE! SOLD!

My 1971 stepside build thread
My Build Thread UPDATED 6/11. DONE
and sold.
lyrikz is offline   Reply With Quote
Old 01-09-2020, 06:00 AM   #243
mcmlxix
Collector of Projects
 
mcmlxix's Avatar
 
Join Date: Apr 2003
Location: Las Vegas
Posts: 3,106
Re: New to me 1972 K5

Installed the custom rear body harness.
Terminated at a junction box so I can tie into the rear trailer harness (blue wire.)
I also have LED lights on all corners and will have my rear side markers flash with the turn signals.
I also ran the harness along the body from the firewall, along the rocker box, then up through the driver side wheel well. I still need to add some clips to secure the harness along the rocker box. It's wrapped in TechFLex F6 split loom.

I used a piece of flex conduit to snake the harness through the rocker box to help protect it from sharp edges and tight turns.

The only thing running inside the frame will be fuel and brake hard lines...
Attached Images
    
__________________
Rich
1972 K5 Blazer CST Click HERE

D60 BIG BRAKE UPGRADE Click HERE
mcmlxix is offline   Reply With Quote
Old 01-10-2020, 06:59 AM   #244
mcmlxix
Collector of Projects
 
mcmlxix's Avatar
 
Join Date: Apr 2003
Location: Las Vegas
Posts: 3,106
Re: New to me 1972 K5

I had my door panels sitting on a shelf for years...
I decided to take them down, wash them and hang them on the doors with a couple bolts. They were covered in Line-X and I had the trim powder coated in red. Still need some arm rests... trying to decide on Black or try Red....
I still need to install my NuRelic power window regulators as well...
Then figure out what to do with the hole where the window crank used to be... Maybe a cup holder...
Attached Images
    
__________________
Rich
1972 K5 Blazer CST Click HERE

D60 BIG BRAKE UPGRADE Click HERE
mcmlxix is offline   Reply With Quote
Old 01-13-2020, 11:39 AM   #245
Green Monster
Registered User
 
Green Monster's Avatar
 
Join Date: Mar 2006
Location: Malvern, PA
Posts: 951
Re: New to me 1972 K5

The door panel looks good. I vote to go with a black arm rest. As for the hole where the window crank was, you could;
A. Mount a dummy handle
B. Mount a handle then set it up to activate a window switch mounted inside the door
C. Mount a halo power momentary switch where the window crank was
D. Mount a white flush mount tweeter in the window crank opening
E. Plug it with a white snap plug
F. Cover the hole with a center hub wheel decal
Attached Images
  

Last edited by Green Monster; 01-13-2020 at 11:55 AM.
Green Monster is offline   Reply With Quote
Old 01-20-2020, 07:27 AM   #246
mcmlxix
Collector of Projects
 
mcmlxix's Avatar
 
Join Date: Apr 2003
Location: Las Vegas
Posts: 3,106
Re: New to me 1972 K5

Designed and installed a bracket for my Dakota Digital gauge module and OBDII interface. Cut out of stainless steel on a waterjet. Bolts to the bake pedal/steering column mount.





__________________
Rich
1972 K5 Blazer CST Click HERE

D60 BIG BRAKE UPGRADE Click HERE
mcmlxix is offline   Reply With Quote
Old 03-06-2020, 02:04 PM   #247
mcmlxix
Collector of Projects
 
mcmlxix's Avatar
 
Join Date: Apr 2003
Location: Las Vegas
Posts: 3,106
Re: New to me 1972 K5

Version 2 of the Dakota Digital mount... place for 2 BIM modules (4 if you mount them back to back)
Attached Images
  
__________________
Rich
1972 K5 Blazer CST Click HERE

D60 BIG BRAKE UPGRADE Click HERE
mcmlxix is offline   Reply With Quote
Old 03-07-2020, 08:13 AM   #248
jaros44sr
Senior Member
 
jaros44sr's Avatar
 
Join Date: May 2006
Location: Philadelphia, Pa. 19454
Posts: 9,691
Re: New to me 1972 K5

sure is nice to have access to a water jet, truck looks great, enjoying your build
__________________
Semper Fi...Uncle Sam, you da man

All parts offered to help are free, unless otherwise noted

Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training
SAFETY FIRST

AS usual, off topic

They say your mind goes second, can't remember the first


Jim
jaros44sr is offline   Reply With Quote
Old 03-09-2020, 09:46 AM   #249
Last_Paladin
Registered User
 
Join Date: Feb 2011
Location: Beverly, MA
Posts: 474
Re: New to me 1972 K5

Very nice work. I'd buy version two of that Dakota mount. I am doing HDX gauges in my Cummins powered K5.
Last_Paladin is offline   Reply With Quote
Old 03-27-2020, 10:22 PM   #250
halfstep
Registered User
 
Join Date: Feb 2015
Location: Maryland
Posts: 246
Re: New to me 1972 K5

Lots of great and creative work.
In line for a Dakota Digital mount if you're making others available well.
halfstep is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:16 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com