Roll call for the 66's! - Page 10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bowtied4life · 07-28-2015, 10:14 PM

Quote:

Originally Posted by Dubnova

Very nice!

Posted via Mobile Device

bowtied4life · 07-28-2015, 10:16 PM

Quote:

Originally Posted by bowtied4life

Posted via Mobile Device

Thanks,she keeps me busy.
Posted via Mobile Device

superfly66 · 07-29-2015, 09:49 PM

Super Fly

superfly66 · 07-29-2015, 09:58 PM

Just got it on the ground yesterday after being on jack stands for a couple of months. Rebuilt rear end, lowering springs and shocks, lowering blocks, drop spindles and front disc brakes. Couldn't be happier with the new attitude adjustment.

bowtied4life · 07-30-2015, 01:37 AM

Quote:

Originally Posted by superfly66

Just got it on the ground yesterday after being on jack stands for a couple of months. Rebuilt rear end, lowering springs and shocks, lowering blocks, drop spindles and front disc brakes. Couldn't be happier with the new attitude adjustment.

Looking real good there

Grizz1963 · 07-30-2015, 02:27 AM

Current status......l

Engine and box out on Saturday.

Pulled the truck forward, jacked up and put an axle stand under the chassis, then removed the front wheel and proceeded to scrape all the years of congealed sand, grease etc from all the suspension parts and chassis.

Not a hard job, but it just takes a lot of time to do right.

A long knive, along with some scrapers, screwdrivers and a steel brush brought me to the point where the next step will be cleaning the oily bits with some petrol and then some Gunk followed by a pressure cleaner.

Bit of a change from two years ago.

It has taken on a who.e financial life of its own now.

c10dougie · 07-30-2015, 03:05 PM

Hey there all!

Heres mine - with a 65

c10sob · 07-30-2015, 05:46 PM

What a long bed does !

Southcity · 07-30-2015, 06:06 PM

Quote:

Originally Posted by c10sob

What a long bed does !

Amen C10sob! that's a good looking longbed doing what it is designed to do.

1milkman · 08-04-2015, 07:06 PM

Name: 12345.jpg
Views: 391
Size: 36.6 KB

...Started life as a C20

**TJ's Chevy** · 12-01-2015, 02:05 PM

Ttt.

66tucknlugs · 12-02-2015, 12:55 PM

My 66 as it sits now.

nail pounder · 12-03-2015, 12:49 AM

Here's our 66 C20

**argonaut** · 12-03-2015, 04:26 AM

I dig your C20, nailpounder! You should cruise it down to the Brother's Truck Show next year.

ol_skool_chevy · 12-03-2015, 08:54 AM

Man I LOVE that gold

**pimpston65** · 12-03-2015, 09:03 AM

thus is Brütis, on his way to the blasters yesterday!!!

nail pounder · 12-03-2015, 09:30 PM

Quote:

Originally Posted by argonaut

I dig your C20, nailpounder! You should cruise it down to the Brother's Truck Show next year.

Thanks Argonaut, we like "Thumper" too. My daughter & I have logged a lot of hours on it. We will probably be at Brothers this year now that it's on the road again.

07-29-2015, 09:49 PM	#228
superfly66 Registered User Join Date: Jul 2015 Location: smyrna georgia Posts: 54	Re: Roll call for the 66's! Super Fly Attached Images

07-29-2015, 09:58 PM	#229
superfly66 Registered User Join Date: Jul 2015 Location: smyrna georgia Posts: 54	Re: Roll call for the 66's! Just got it on the ground yesterday after being on jack stands for a couple of months. Rebuilt rear end, lowering springs and shocks, lowering blocks, drop spindles and front disc brakes. Couldn't be happier with the new attitude adjustment. Attached Images

07-30-2015, 02:27 AM	#231
Grizz1963 Registered User Join Date: Dec 2012 Location: Rochester, KENT Posts: 10,505	Re: Roll call for the 66's! Current status......l Engine and box out on Saturday. Pulled the truck forward, jacked up and put an axle stand under the chassis, then removed the front wheel and proceeded to scrape all the years of congealed sand, grease etc from all the suspension parts and chassis. Not a hard job, but it just takes a lot of time to do right. A long knive, along with some scrapers, screwdrivers and a steel brush brought me to the point where the next step will be cleaning the oily bits with some petrol and then some Gunk followed by a pressure cleaner. Bit of a change from two years ago. It has taken on a who.e financial life of its own now. __________________ MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE.

07-30-2015, 03:05 PM	#232
c10dougie Registered User Join Date: Jun 2015 Location: Dundee, Scotland Posts: 2	Re: Roll call for the 66's! Hey there all! Heres mine - with a 65 Attached Images

07-30-2015, 05:46 PM	#233
c10sob Registered User Join Date: Jul 2015 Location: Meridian, idaho Posts: 12	Re: Roll call for the 66's! What a long bed does ! Attached Images

08-04-2015, 07:06 PM	#235
1milkman Registered User Join Date: Apr 2013 Location: Portsmouth, VA. Posts: 21	Re: Roll call for the 66's! ...Started life as a C20

12-01-2015, 02:05 PM	#236
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: Roll call for the 66's! Ttt. __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

12-02-2015, 12:55 PM	#237
66tucknlugs Registered User Join Date: Sep 2015 Location: Las Vegas NV Posts: 9	Re: Roll call for the 66's! My 66 as it sits now. Attached Images

12-03-2015, 12:49 AM	#238
nail pounder Registered User Join Date: Aug 2014 Location: Fallbrook CA Posts: 453	Re: Roll call for the 66's! Here's our 66 C20 Attached Images

12-03-2015, 04:26 AM	#239
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: Roll call for the 66's! I dig your C20, nailpounder! You should cruise it down to the Brother's Truck Show next year. __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

12-03-2015, 08:54 AM	#240
ol_skool_chevy Registered User Join Date: May 2010 Location: Hillsboro, Oregon 97123 Posts: 1,300	Re: Roll call for the 66's! Man I LOVE that gold Attached Images __________________ Measure with a yard stick Mark with Chalk Cut with a torch Built it yourself, don't count on others to to do it for you or with you. It will never get done

12-03-2015, 09:03 AM	#241
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,191	Re: Roll call for the 66's! thus is Brütis, on his way to the blasters yesterday!!! Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.