Best "Rake/Stance" for a Hot Rodded 60-66 C10? - Page 11 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Clyde65** · 03-19-2019, 08:46 PM

Front:2.5” spindles, 1.5” ECE drop springs
Rear: airbags 40 psi
Fr/rr shock relocators
Front sway bar, lowered mount

LVPhotos · 03-19-2019, 09:16 PM

1962,

LostMy65 · 01-01-2020, 10:28 PM

Old school rake

Hollow65 · 01-01-2020, 10:58 PM

Quote:

Originally Posted by LostMy65

Old school rake

Dig it

theastronaut · 01-02-2020, 01:31 PM

1.5 coil cut from stock front springs. Bump stop brackets completely removed. CPP disc/drop spindle kit, unknown used drop rear springs, drop blocks, small pipe notch, stock front wheels with 1.5" bolt on spacers, 8" vintage aftermarket chrome reverse wheels (slightly less backspacing than 8" blazer wheels), 215/75 and 235/75 tires. The front wheel spacers really help fill out the fenderwell while keeping the skinny front wheel/tire look.

rcnutt · 01-02-2020, 02:06 PM

Here's my 64 .....5.5" front and 8" rear. Perfect stance in my eyes.

joe dirt · 01-02-2020, 02:12 PM

old school rake

vin63 · 01-02-2020, 02:23 PM

Not the best, but here's how my '63 ended up. I kept it pretty close to my old Super Gas/Street Chevy II.

likaroc13 · 01-02-2020, 02:53 PM

Quote:

Originally Posted by vin63

Not the best, but here's how my '63 ended up. I kept it pretty close to my old Super Gas/Street Chevy II.

forestb · 01-02-2020, 03:22 PM

I'm not sure why people are still posting on this thread. I posted my truck a long time ago.

LostMy65 · 01-02-2020, 03:38 PM

Quote:

Originally Posted by forestb

I'm not sure why people are still posting on this thread. I posted my truck a long time ago.

I know!!!!
My problem is I'm still stuck in the late 70's early 80's when the hot rods were jacked up in the back.

C/10 King · 01-03-2020, 01:33 AM

My dropped patina-ed GMC BBW SWB ……… The Hag

rustbucket66 · 01-05-2020, 12:38 PM

This is a great thread. A lot of beauty trucks in here.

J Williams · 01-05-2020, 07:56 PM

Quote:

Originally Posted by joe dirt

old school rake

What is the drop on this. Looks good man and I am about to drop mine.
Posted via Mobile Device

rustbucket66 · 01-06-2020, 11:10 AM

Thanks. 2 1/2 inch drop spindles and 2 inch drop springs in the front, and 4 inch drop springs in the rear. About as low as you can go without hitting anything or bagging it.

forestb · 01-06-2020, 12:47 PM

Quote:

Originally Posted by rustbucket66

Thanks. 2 1/2 inch drop spindles and 2 inch drop springs in the front, and 4 inch drop springs in the rear. About as low as you can go without hitting anything or bagging it.

You do have a vary nice stance but I think he was talking to "Joe dirt". At least that is who he quoted.

joe dirt · 01-06-2020, 01:04 PM

Quote:

Originally Posted by J Williams

What is the drop on this. Looks good man and I am about to drop mine.
Posted via Mobile Device

unsure, it was done by previous owner...front coils are cut, rear leaf springs has some leafs taken out of the pack...it looks to be close to a 4/6 drop

LostMy65 · 01-21-2021, 10:20 PM

Quote:

Originally Posted by racecougar

2-1/2" drop spindles and 1-1/2" drop blocks with 29"/31" tires.

Another of racecougar.

racecougar · 01-21-2021, 10:42 PM

Quote:

Originally Posted by LostMy65

Another of racecougar.

I took that photo on Black Friday last year. Figured it was fitting to drive that vehicle that day.

I've got it all blown apart currently. Finally painting the front clip and installing a Vintage Air setup.

**nsb29** · 01-22-2021, 10:02 AM

Quote:

Originally Posted by LostMy65

I know!!!!
My problem is I'm still stuck in the late 70's early 80's when the hot rods were jacked up in the back.

That actually goes back to the 60s I also remember when it was just the opposite dropped in the back jacked up in the front

**Ghetto Fireman** · 01-23-2021, 11:53 AM

2 1/2 drop spindles 1” drop coils in front 3” drop coils in rear.

LostMy65 · 03-29-2021, 11:51 AM

Quote:

Originally Posted by Hollow65

Dig it

I like it especially because it makes a long bed look mean.

goatless · 03-30-2021, 12:18 AM

Before on the left: CPP 2.5" modular drop spindles, 4" lowering springs, 454 w/iron heads. Lots of lower control arm scraping on semi-bumpy roads.

After on the right: CPP 2.5" modular drop spindles, 3" lowering springs, 454 w/iron heads. No more scrapes.

Rears combo lowering springs and blocks.

**pdxhall** · 03-31-2021, 12:32 PM

Here's mine. 2 1/2" drop spindles & 1" drop springs in front. 5" drop springs in the rear. no bed yet or full tank of gas so it will probably come down another inch or so in the rear.

LostMy65 · 05-09-2021, 03:52 PM

Saw this coming back from Longview yesterday.

03-19-2019, 08:46 PM	#251
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,545	Re: Best "Rake/Stance" for a Hot Rodded 60-66 C10? Front:2.5” spindles, 1.5” ECE drop springs Rear: airbags 40 psi Fr/rr shock relocators Front sway bar, lowered mount Attached Images __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

03-19-2019, 09:16 PM	#252
LVPhotos Registered User Join Date: Jan 2013 Location: Las Vegas, NV Posts: 1,857	Re: Best "Rake/Stance" for a Hot Rodded 60-66 C10? 1962, Attached Images __________________ 1962 shortbed 408cui small block, TKO 600 5-speed, bagged Porterbuilt suspension. 18" Salt Flats http://www.cardomain.com/ride/332579...t-c-k-pick-up/ http://67-72chevytrucks.com/vboard/s...d.php?t=560081

01-01-2020, 10:28 PM	#253
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,527	Re: Best "Rake/Stance" for a Hot Rodded 60-66 C10? Old school rake Attached Images __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

01-02-2020, 01:31 PM	#255
theastronaut Registered User Join Date: May 2011 Location: Anderson SC Posts: 3,896	Re: Best "Rake/Stance" for a Hot Rodded 60-66 C10? 1.5 coil cut from stock front springs. Bump stop brackets completely removed. CPP disc/drop spindle kit, unknown used drop rear springs, drop blocks, small pipe notch, stock front wheels with 1.5" bolt on spacers, 8" vintage aftermarket chrome reverse wheels (slightly less backspacing than 8" blazer wheels), 215/75 and 235/75 tires. The front wheel spacers really help fill out the fenderwell while keeping the skinny front wheel/tire look. __________________ Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc

01-02-2020, 02:06 PM	#256
rcnutt Registered User Join Date: Sep 2010 Location: Citrus Heights, CA. Posts: 131	Re: Best "Rake/Stance" for a Hot Rodded 60-66 C10? Here's my 64 .....5.5" front and 8" rear. Perfect stance in my eyes. Attached Images __________________ 64 short fleet

01-02-2020, 02:12 PM	#257
joe dirt Registered User Join Date: Dec 2014 Location: portland oregon Posts: 292	Re: Best "Rake/Stance" for a Hot Rodded 60-66 C10? old school rake Attached Images __________________ 1961 c10 longbed - gone 1964 c10 swb

01-02-2020, 02:23 PM	#258
vin63 It's Better With Nitro Join Date: Apr 2008 Location: Chino Hills, CA Posts: 2,262	Re: Best "Rake/Stance" for a Hot Rodded 60-66 C10? Not the best, but here's how my '63 ended up. I kept it pretty close to my old Super Gas/Street Chevy II. Attached Images __________________ 1963 C-10: Deluxe-optioned cab, shortbed, fleetside Pontiac 462 ci, Kauffman D-Port alum. heads 4L80E, narrowed sheetmetal Ford 9-inch Tubular front and rear suspension Custom 6-piston front disc and 4-piston rear disc brakes

01-02-2020, 03:22 PM	#260
forestb Registered User Join Date: Jan 2009 Location: Burbank, CA Posts: 3,619	Re: Best "Rake/Stance" for a Hot Rodded 60-66 C10? I'm not sure why people are still posting on this thread. I posted my truck a long time ago.

01-03-2020, 01:33 AM	#262
C/10 King Registered User Join Date: Feb 2009 Location: A****er, CA Posts: 5,594	Re: Best "Rake/Stance" for a Hot Rodded 60-66 C10? My dropped patina-ed GMC BBW SWB ……… The Hag Attached Images __________________ C/10 Rene 1966 Short Fleet "The Hag" 1967 CST Short Fleet "Dark Poly" 1971 Short Fleet 1970 Jimmy Custom 2 WD "Golden Ticket" 1972 Blazer 2 WD "Retro Blaze"

01-05-2020, 12:38 PM	#263
rustbucket66 Registered User Join Date: Dec 2010 Location: Strathmore, Alberta Posts: 470	Re: Best "Rake/Stance" for a Hot Rodded 60-66 C10? This is a great thread. A lot of beauty trucks in here. Attached Images

01-06-2020, 11:10 AM	#265
rustbucket66 Registered User Join Date: Dec 2010 Location: Strathmore, Alberta Posts: 470	Re: Best "Rake/Stance" for a Hot Rodded 60-66 C10? Thanks. 2 1/2 inch drop spindles and 2 inch drop springs in the front, and 4 inch drop springs in the rear. About as low as you can go without hitting anything or bagging it.

01-23-2021, 11:53 AM	#271
Ghetto Fireman Junior Member Join Date: Oct 2014 Location: Venice, California Posts: 59	Re: Best "Rake/Stance" for a Hot Rodded 60-66 C10? 2 1/2 drop spindles 1” drop coils in front 3” drop coils in rear. Attached Images

03-30-2021, 12:18 AM	#273
goatless Registered User Join Date: Oct 2015 Location: Mountain View Posts: 121	Re: Best "Rake/Stance" for a Hot Rodded 60-66 C10? Before on the left: CPP 2.5" modular drop spindles, 4" lowering springs, 454 w/iron heads. Lots of lower control arm scraping on semi-bumpy roads. After on the right: CPP 2.5" modular drop spindles, 3" lowering springs, 454 w/iron heads. No more scrapes. Rears combo lowering springs and blocks. Attached Images __________________ 1964 C10 LWB->SWB, 283->454, SM420->200-4R MECHANIC: "ME"

03-31-2021, 12:32 PM	#274
pdxhall Senior Member Join Date: Mar 2011 Location: Tucson, Arizona Posts: 2,079	Re: Best "Rake/Stance" for a Hot Rodded 60-66 C10? Here's mine. 2 1/2" drop spindles & 1" drop springs in front. 5" drop springs in the rear. no bed yet or full tank of gas so it will probably come down another inch or so in the rear. Attached Images __________________ Sanity'66 http://67-72chevytrucks.com/vboard/s...d.php?t=515110 Long bed, Fleetside, Small back window I've Done So Much, With So Little, For So Long, That Now I Can Do Anything With Nothing.

05-09-2021, 03:52 PM	#275
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,527	Re: Best "Rake/Stance" for a Hot Rodded 60-66 C10? Saw this coming back from Longview yesterday. Attached Images __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.