1967 Mustang Coupe Build (Electra) - Page 16 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rusbuilt · 11-18-2013, 06:23 PM

I love it Jeff!

JRANGER · 11-18-2013, 06:26 PM

Quote:

Originally Posted by Rusbuilt

I love it Jeff!

Thanks Rus!!! But im not satisfied...Too many runs....I have decided tomorrow I start wet sanding around noon. It will be 65 hours since it was last coated so i think it will be good to go. I have a ton of 400 grit sand paper just waiting for it!!

JRANGER · 11-18-2013, 06:36 PM

Also just because she is drying doesnt mean no work is to be done! Today I stayed inside the car with a respirator and goggles. I grinded welds, wire wheeled, cleaned, and brushed on rust encapsulator on the passenger side

Rusbuilt · 11-18-2013, 06:39 PM

That looks good too Jeff! lol

cubber · 11-18-2013, 09:20 PM

I think it looks killer! I really like the way it looks with those wheels, too. Mean!

**Denee007** · 11-18-2013, 09:30 PM

That floorboard looks fabulous, well done! are you going to put Fatmat or a sound deadening material?
The paint you used, did it have a hardener?

JRANGER · 11-18-2013, 09:36 PM

Quote:

Originally Posted by cubber

I think it looks killer! I really like the way it looks with those wheels, too. Mean!

Thanks man!!!

Quote:

Originally Posted by Denee007

That floorboard looks fabulous, well done! are you going to put Fatmat or a sound deadening material?
The paint you used, did it have a hardener?

I will do sound deadening just not for a while.

The John Deere Blitz black can be used with or without hardener but I did use it. I wanted it to dry fast and it gives it more sheen with it and I wanted a little sheen

67ChevyRedneck · 11-19-2013, 12:56 AM

Don't use fatmat, it's pretty much that cheap rolled roofing stuff with their logo on it. They do make a good butyl stuff but it's $. Stick with butyl dynamat.

JRANGER · 11-19-2013, 01:02 AM

Quote:

Originally Posted by 67ChevyRedneck

Don't use fatmat, it's pretty much that cheap rolled roofing stuff with their logo on it. They do make a good butyl stuff but it's $. Stick with butyl dynamat.

good to know, I have one saved in my favs at work just dont remember what kind it was. It wasnt fatmat though...So ill make sure its butyl

**Dieselwrencher** · 11-19-2013, 04:53 PM

Nice work the car is looking a lot better. Like has already been said, it can be sanded and resprayed. You are teaching your self great techniques and the more you do the better you get at it. I agree the car looks real tough man. Nice work!!!

Rusbuilt · 11-19-2013, 06:33 PM

Hows the wet sanding going? We need pics

JRANGER · 11-19-2013, 07:29 PM

Wet sanding complete. She back in the paint booth, been wiped down 5 or 6 times with wax/grease remover solution and all ready for paint. IN the morning im going to put my heater in the booth and about noon tack cloth her and get rdy to paint

**Dieselwrencher** · 11-19-2013, 07:43 PM

Good luck with it man! The next thing the car needs is some window tint to make that black work!

JRANGER · 11-19-2013, 07:45 PM

Haha Thanks, gonna need to put the windshields back in first lol

shearjs · 11-20-2013, 11:29 AM

The car is looking great Jeff. She's gonna be mean all blacked out!

JRANGER · 11-20-2013, 11:39 AM

Quote:

Originally Posted by shearjs

The car is looking great Jeff. She's gonna be mean all blacked out!

Thanks man! It just needs to warm up so I can get to work...Damn little space heater isnt doing much at all lol

77ChevySharkBite · 11-20-2013, 12:21 PM

Looking good Jeff!! You have you own little mini car show going on at your house now with all the cars

Mustang is looking really sweet man!

JRANGER · 11-20-2013, 04:44 PM

Well shes coated and does have all the runs anymore. I dunno the way the paint went on was a little different. I ended up with 2 mist coats and a final light/medium coat i suppose..I guess the sun will show all tomorrow

JRANGER · 11-20-2013, 05:21 PM

quick shot

Rusbuilt · 11-20-2013, 06:47 PM

Sweet!

**Dieselwrencher** · 11-20-2013, 11:33 PM

Looking good man!

77ChevySharkBite · 11-21-2013, 09:42 AM

It's Blitzing awesome!!

JRANGER · 11-21-2013, 11:50 AM

Well she's finished..some striping on hood, trunk n roof but ill be hiding those with rally stripes maybe this weekend...

77ChevySharkBite · 11-21-2013, 11:54 AM

Great job Jeff!!! It looks great!!

**Denee007** · 11-21-2013, 11:55 AM

I'm so proud of you! Great job! An awesome Mustang and you made it happen

dne'

11-18-2013, 06:23 PM	#376
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: 1967 Mustang Coupe Build (Electra) I love it Jeff! __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

11-18-2013, 06:36 PM	#378
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: 1967 Mustang Coupe Build (Electra) Also just because she is drying doesnt mean no work is to be done! Today I stayed inside the car with a respirator and goggles. I grinded welds, wire wheeled, cleaned, and brushed on rust encapsulator on the passenger side Attached Images __________________ PLEASE HELP WITH PROJECT UNDERHAULIN http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper

11-18-2013, 06:39 PM	#379
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: 1967 Mustang Coupe Build (Electra) That looks good too Jeff! lol __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

11-18-2013, 09:20 PM	#380
cubber Registered User Join Date: Mar 2012 Location: Leanna, TN Posts: 2,061	Re: 1967 Mustang Coupe Build (Electra) I think it looks killer! I really like the way it looks with those wheels, too. Mean! __________________ =MATTHEW 69 Stepper...Stroked & Bagged GONE BUT NOT FORGOTTEN 2003 Chevrolet Z71 Ext. Cab 1995 Cavalier gas saver!

11-18-2013, 09:30 PM	#381
Denee007 Senior Member Join Date: May 2011 Location: Cypress, Tx. Posts: 1,504	Re: 1967 Mustang Coupe Build (Electra) That floorboard looks fabulous, well done! are you going to put Fatmat or a sound deadening material? The paint you used, did it have a hardener? __________________ '72 Ford Bronco project(July 17 2021-?) https://67-72chevytrucks.com/vboard/...d.php?t=828015 59 Apache (sold 6-25-2021) 67 Ford Mustang (re-restored after Harvey) 1968 Jeep Cj5 (2-8-2020 to present) 1992 Jeep Yj (8-17-20 to present) (Jurassic build) www.Classiccarsandtools.com

11-19-2013, 12:56 AM	#383
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: 1967 Mustang Coupe Build (Electra) Don't use fatmat, it's pretty much that cheap rolled roofing stuff with their logo on it. They do make a good butyl stuff but it's $. Stick with butyl dynamat. __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

11-19-2013, 04:53 PM	#385
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: 1967 Mustang Coupe Build (Electra) Nice work the car is looking a lot better. Like has already been said, it can be sanded and resprayed. You are teaching your self great techniques and the more you do the better you get at it. I agree the car looks real tough man. Nice work!!! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

11-19-2013, 06:33 PM	#386
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: 1967 Mustang Coupe Build (Electra) Hows the wet sanding going? We need pics __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

11-19-2013, 07:29 PM	#387
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: 1967 Mustang Coupe Build (Electra) Wet sanding complete. She back in the paint booth, been wiped down 5 or 6 times with wax/grease remover solution and all ready for paint. IN the morning im going to put my heater in the booth and about noon tack cloth her and get rdy to paint Attached Images __________________ PLEASE HELP WITH PROJECT UNDERHAULIN http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper

11-19-2013, 07:43 PM	#388
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: 1967 Mustang Coupe Build (Electra) Good luck with it man! The next thing the car needs is some window tint to make that black work! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

11-19-2013, 07:45 PM	#389
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: 1967 Mustang Coupe Build (Electra) Haha Thanks, gonna need to put the windshields back in first lol __________________ PLEASE HELP WITH PROJECT UNDERHAULIN http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper

11-20-2013, 11:29 AM	#390
shearjs Registered User Join Date: Mar 2011 Location: Thompsons Station, TN Posts: 700	Re: 1967 Mustang Coupe Build (Electra) The car is looking great Jeff. She's gonna be mean all blacked out! __________________ -Jason '72 Family Hauler Rufus' Restoration - 70 GMC, LS swap - SOLD

11-20-2013, 12:21 PM	#392
77ChevySharkBite Registered User Join Date: Aug 2012 Location: Houston, Texas Posts: 2,475	Re: 1967 Mustang Coupe Build (Electra) Looking good Jeff!! You have you own little mini car show going on at your house now with all the cars Mustang is looking really sweet man! __________________ Korwin 77 C10 Silverado Sharkbite LWB Build 67 Chevy C10 Frame Off 06 Dodge Magnum 2.7v6 aka swag wag! 2010 Honda Accord 2.4I4 DD aka Liquid Metal

11-20-2013, 04:44 PM	#393
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: 1967 Mustang Coupe Build (Electra) Well shes coated and does have all the runs anymore. I dunno the way the paint went on was a little different. I ended up with 2 mist coats and a final light/medium coat i suppose..I guess the sun will show all tomorrow __________________ PLEASE HELP WITH PROJECT UNDERHAULIN http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper

11-20-2013, 05:21 PM	#394
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: 1967 Mustang Coupe Build (Electra) quick shot Attached Images __________________ PLEASE HELP WITH PROJECT UNDERHAULIN http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper



Register or Log In To remove these advertisements.

11-20-2013, 06:47 PM	#395
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: 1967 Mustang Coupe Build (Electra) Sweet! __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

11-20-2013, 11:33 PM	#396
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: 1967 Mustang Coupe Build (Electra) Looking good man! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

11-21-2013, 09:42 AM	#397
77ChevySharkBite Registered User Join Date: Aug 2012 Location: Houston, Texas Posts: 2,475	Re: 1967 Mustang Coupe Build (Electra) It's Blitzing awesome!! __________________ Korwin 77 C10 Silverado Sharkbite LWB Build 67 Chevy C10 Frame Off 06 Dodge Magnum 2.7v6 aka swag wag! 2010 Honda Accord 2.4I4 DD aka Liquid Metal

11-21-2013, 11:50 AM	#398
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: 1967 Mustang Coupe Build (Electra) Well she's finished..some striping on hood, trunk n roof but ill be hiding those with rally stripes maybe this weekend... Attached Images __________________ PLEASE HELP WITH PROJECT UNDERHAULIN http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper

11-21-2013, 11:54 AM	#399
77ChevySharkBite Registered User Join Date: Aug 2012 Location: Houston, Texas Posts: 2,475	Re: 1967 Mustang Coupe Build (Electra) Great job Jeff!!! It looks great!! __________________ Korwin 77 C10 Silverado Sharkbite LWB Build 67 Chevy C10 Frame Off 06 Dodge Magnum 2.7v6 aka swag wag! 2010 Honda Accord 2.4I4 DD aka Liquid Metal

11-21-2013, 11:55 AM	#400
Denee007 Senior Member Join Date: May 2011 Location: Cypress, Tx. Posts: 1,504	Re: 1967 Mustang Coupe Build (Electra) I'm so proud of you! Great job! An awesome Mustang and you made it happen dne' __________________ '72 Ford Bronco project(July 17 2021-?) https://67-72chevytrucks.com/vboard/...d.php?t=828015 59 Apache (sold 6-25-2021) 67 Ford Mustang (re-restored after Harvey) 1968 Jeep Cj5 (2-8-2020 to present) 1992 Jeep Yj (8-17-20 to present) (Jurassic build) www.Classiccarsandtools.com

Register or Log In To remove these advertisements.