Long Project: Orange Julius - Page 16 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Lee H · 02-18-2013, 09:29 AM

Nice work!
Posted via Mobile Device

nibs · 02-18-2013, 11:44 AM

thanks man! you need to stop by some time soon.. I leave for 3 months in about a week

Lee H · 02-18-2013, 11:53 AM

I'd like to stop by and see this thing. I'll bring the prom queen if it's not raining. PM me, I'm on holiday for the next few weeks.

nibs · 02-19-2013, 05:35 PM

and BOOM! its temp installed

So much better!

**67cheby** · 02-19-2013, 05:44 PM

Wow, nice!

502ms · 02-19-2013, 09:00 PM

Thanks for your service! Congrats on the kitchen and soon-to-be wife.

Looks like you are coming along well.
Posted via Mobile Device

Bennett68C10 · 02-19-2013, 09:03 PM

Dropmember looks great, can't wait to get mine
Posted via Mobile Device

nibs · 02-19-2013, 09:48 PM

Quote:

Originally Posted by 67cheby

Wow, nice!

Thanks mike! I can't wait to be at your level...

Quote:

Originally Posted by 502ms

Thanks for your service! Congrats on the kitchen and soon-to-be wife.

Looks like you are coming along well.
Posted via Mobile Device

Thanks man! I really can't wait to get it back out and powercoated!

Quote:

Originally Posted by Bennett--G4L

Dropmember looks great, can't wait to get mine
Posted via Mobile Device

Thank you! I wish I would have waited until Nate introduced the new generation... Talk about gorgeous!
Posted via Mobile Device

vegadesign · 03-16-2013, 03:25 PM

Just looked through your whole build thread man
Love the work, looking good
Posted via Mobile Device

orngsikL · 03-16-2013, 10:01 PM

nice progress!

nibs · 03-17-2013, 03:42 AM

Quote:

Originally Posted by vegadesign

Just looked through your whole build thread man
Love the work, looking good
Posted via Mobile Device

Thanks man!

Quote:

Originally Posted by orngsikL

nice progress!

Thank you too!

nibs · 03-31-2013, 06:48 AM

So, in my quest to find an engine machine shop, my father in law found a fully assembled LQ9 from a 2005 Denali with 80,000k on it. Came with the GM performance manifold and another one. I think it might be the original truck manifold. Not a bad buy for $900!

After looking at it, I think I might keep that manifold on it rather than the LS2 mani I have in the garage... A little retro look would be pretty neat, I think!

ddubbs · 04-09-2013, 01:48 AM

Sweet man. Absolutely luv your ride. Subscribed
Posted via Mobile Device

nibs · 04-09-2013, 06:51 AM

Quote:

Originally Posted by ddubbs

Sweet man. Absolutely luv your ride. Subscribed
Posted via Mobile Device

Thanks man! I really appreciate that coming from someone with rides like yours.

Ive been watching your latest build

RatRod68 · 04-10-2013, 11:22 AM

Love it. I want to do the drop member so bad.

What are you doing about the bed floor now? Raising it or cutting it out?

What base do you work at? I was stationed in SD

nibs · 04-10-2013, 11:32 AM

Quote:

Originally Posted by RatRod68

Love it. I want to do the drop member so bad.

What are you doing about the bed floor now? Raising it or cutting it out?

What base do you work at? I was stationed in SD

Thanks man! I went back and forth with the decision to buy the dropmember and I guess I just finally convinced myself to do it once I decided to go with the LS swap. After playing around with putting it on, I cant say Ive made a better decision! in other words, DO IT!

Im actually going to keep the bed floor like it is. I didnt buy the rear dropmember, so all it really is, is the PB trailing arms and crossmember. Maybe later in the future i might raise it, but its not in my immediate plans

I am not actually in the military, Im actually just a civilian contractor. However, I have an uncle that used to be stationed in SD.

RatRod68 · 04-10-2013, 12:04 PM

Quote:

Originally Posted by nibs

Thanks man! I went back and forth with the decision to buy the dropmember and I guess I just finally convinced myself to do it once I decided to go with the LS swap. After playing around with putting it on, I cant say Ive made a better decision! in other words, DO IT!

Im actually going to keep the bed floor like it is. I didnt buy the rear dropmember, so all it really is, is the PB trailing arms and crossmember. Maybe later in the future i might raise it, but its not in my immediate plans

I am not actually in the military, Im actually just a civilian contractor. However, I have an uncle that used to be stationed in SD.

got too many projects right now to afford it, or I'd have already done it.

Does the diff hit the bed floor when its bagged out?

I read where you said you were a contractor, but most of them are on bases somewhere. That's why i asked. I'm trying to get on with Lockheed once I finish my masters.

oh yea, you're going to LOVE the LS swap

nibs · 04-10-2013, 01:54 PM

Quote:

Originally Posted by RatRod68

got too many projects right now to afford it, or I'd have already done it.

Does the diff hit the bed floor when its bagged out?

I read where you said you were a contractor, but most of them are on bases somewhere. That's why i asked. I'm trying to get on with Lockheed once I finish my masters.

oh yea, you're going to LOVE the LS swap

Aww, dang!

Yes, the diff does hit the bed floor when its aired out, but thats it. I mean it barely love taps it...

Im not based out of any base back home except my employers' facility. I am overseas right now, but cant exactly say where :/ Good luck with lockheed! I almost snagged a job with them at SkunkWorks but I decided to go where Im at right now

nibs · 04-27-2013, 02:13 PM

So, during a random search for C10s with flames on google images and I ran across this... Gotta say this puts a pretty big smile on my face! Maybe I might be going somewhere with this build. LOL
http://www.streetlegaltv.com/news/71...er/#fbComments

**67cheby** · 04-27-2013, 02:42 PM

looking good, nice score on the motor

ddubbs · 04-27-2013, 03:09 PM

Coming along sweet!!! Keep up the awesome work.
Posted via Mobile Device

nibs · 04-27-2013, 03:58 PM

Quote:

Originally Posted by 67cheby

looking good, nice score on the motor

Thanks Mike! I couldnt let the engine deal pass... So now I have 2 LQ9 sitting around

Quote:

Originally Posted by ddubbs

Coming along sweet!!! Keep up the awesome work.
Posted via Mobile Device

Thanks man! Havent been able to do much work overseas but window shop, but that sure is half the fun

orngsikL · 04-27-2013, 04:25 PM

nice!

nibs · 04-28-2013, 04:20 AM

Quote:

Originally Posted by orngsikL

nice!

Thanks brotha!

Law79 · 09-14-2013, 03:14 PM

I know you probably said it earlier in your thread but I didn't see it. But what kind of push button setup are you using and how do you like it? I was thinking about putting one on my 69
Posted via Mobile Device

02-18-2013, 09:29 AM	#376
Lee H Registered User Join Date: Jun 2010 Location: Upland Ca Posts: 4,141	Re: Long Project: Orange Julius Nice work! Posted via Mobile Device __________________ 1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner. 1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components. My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703

02-18-2013, 11:44 AM	#377
nibs JRods Garage Join Date: Dec 2009 Location: East Highland, CA Posts: 1,098	Re: Long Project: Orange Julius thanks man! you need to stop by some time soon.. I leave for 3 months in about a week __________________ Orange Julius-My dropmember'd, LS'd, SWB street machine...

02-18-2013, 11:53 AM	#378
Lee H Registered User Join Date: Jun 2010 Location: Upland Ca Posts: 4,141	Re: Long Project: Orange Julius I'd like to stop by and see this thing. I'll bring the prom queen if it's not raining. PM me, I'm on holiday for the next few weeks. __________________ 1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner. 1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components. My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703

02-19-2013, 05:35 PM	#379
nibs JRods Garage Join Date: Dec 2009 Location: East Highland, CA Posts: 1,098	Re: Long Project: Orange Julius and BOOM! its temp installed So much better! __________________ Orange Julius-My dropmember'd, LS'd, SWB street machine...

02-19-2013, 05:44 PM	#380
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Long Project: Orange Julius Wow, nice! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

02-19-2013, 09:00 PM	#381
502ms Registered User Join Date: Aug 2011 Location: Atlanta, GA Posts: 1,523	Re: Long Project: Orange Julius Thanks for your service! Congrats on the kitchen and soon-to-be wife. Looks like you are coming along well. Posted via Mobile Device __________________ Best Regards, Leon M. Instagram: @TheDirtyDianah Bagged \| 6.0L LS \| T-56 (6-Speed Manual) \| Turbo Burnout/Rolling Video: Chevy C10 Stepside 6.0L LSx & 6-Speed Manual

02-19-2013, 09:03 PM	#382
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Long Project: Orange Julius Dropmember looks great, can't wait to get mine Posted via Mobile Device __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

03-16-2013, 03:25 PM	#384
vegadesign Registered User Join Date: May 2012 Location: murfreesboro, TN Posts: 743	Re: Long Project: Orange Julius Just looked through your whole build thread man Love the work, looking good Posted via Mobile Device __________________ "its not a hobby, It's a Lifestyle" . bagged and soon to be bodied 70 longbed http://67-72chevytrucks.com/vboard/s...d.php?t=564028

03-16-2013, 10:01 PM	#385
orngsikL Registered User Join Date: Oct 2011 Location: Watson, Louisiana Posts: 312	Re: Long Project: Orange Julius nice progress! __________________ build thread - 1972 C/10 "Ethyl" 1974 C/10 " Paw Paw" C/10 Club Louisiana instagram - @esso_c10 @projectpawpaw

03-31-2013, 06:48 AM	#387
nibs JRods Garage Join Date: Dec 2009 Location: East Highland, CA Posts: 1,098	Re: Long Project: Orange Julius So, in my quest to find an engine machine shop, my father in law found a fully assembled LQ9 from a 2005 Denali with 80,000k on it. Came with the GM performance manifold and another one. I think it might be the original truck manifold. Not a bad buy for $900! After looking at it, I think I might keep that manifold on it rather than the LS2 mani I have in the garage... A little retro look would be pretty neat, I think! __________________ Orange Julius-My dropmember'd, LS'd, SWB street machine...

04-09-2013, 01:48 AM	#388
ddubbs Registered User Join Date: Feb 2011 Location: Alaska Posts: 461	Re: Long Project: Orange Julius Sweet man. Absolutely luv your ride. Subscribed Posted via Mobile Device __________________ LIFTED OR LOW THE ONLY WAY TO GO!!!! Check out my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=517346 Projects 56 Chevy pickup Porterbuilt FR/RR dropmembers

04-10-2013, 11:22 AM	#390
RatRod68 Registered User Join Date: Aug 2007 Location: Kentucky Posts: 828	Re: Long Project: Orange Julius Love it. I want to do the drop member so bad. What are you doing about the bed floor now? Raising it or cutting it out? What base do you work at? I was stationed in SD __________________ build Threads: Nasty 68 C10. My lil hotrod Leftovers 68 C20 D-Ranged Ford Ranger on steroids Semper Fi

04-27-2013, 02:13 PM	#394
nibs JRods Garage Join Date: Dec 2009 Location: East Highland, CA Posts: 1,098	Re: Long Project: Orange Julius So, during a random search for C10s with flames on google images and I ran across this... Gotta say this puts a pretty big smile on my face! Maybe I might be going somewhere with this build. LOL http://www.streetlegaltv.com/news/71...er/#fbComments __________________ Orange Julius-My dropmember'd, LS'd, SWB street machine...

04-27-2013, 02:42 PM	#395
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Long Project: Orange Julius looking good, nice score on the motor __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

04-27-2013, 03:09 PM	#396
ddubbs Registered User Join Date: Feb 2011 Location: Alaska Posts: 461	Re: Long Project: Orange Julius Coming along sweet!!! Keep up the awesome work. Posted via Mobile Device __________________ LIFTED OR LOW THE ONLY WAY TO GO!!!! Check out my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=517346 Projects 56 Chevy pickup Porterbuilt FR/RR dropmembers



Register or Log In To remove these advertisements.

04-27-2013, 04:25 PM	#398
orngsikL Registered User Join Date: Oct 2011 Location: Watson, Louisiana Posts: 312	Re: Long Project: Orange Julius nice! __________________ build thread - 1972 C/10 "Ethyl" 1974 C/10 " Paw Paw" C/10 Club Louisiana instagram - @esso_c10 @projectpawpaw

09-14-2013, 03:14 PM	#400
Law79 Registered User Join Date: Apr 2013 Location: Valley Lee, Maryland Posts: 13	Re: Long Project: Orange Julius I know you probably said it earlier in your thread but I didn't see it. But what kind of push button setup are you using and how do you like it? I was thinking about putting one on my 69 Posted via Mobile Device

Register or Log In To remove these advertisements.