What did you do to your truck today? - Page 171 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Kerlijah · 11-20-2011, 04:22 PM

Quote:

Originally Posted by firefighter736

Finally got the truck road worthy last night and was asked to participate in a photo shoot. Got some really awesome shots of the truck in Roanoke, VA tonight.

Damn dude, that is one mean lookin truck!! Way cool!!

yumyumchoppers · 11-20-2011, 09:08 PM

got a driveshaft

niterider65 · 11-20-2011, 09:46 PM

cleaning more stuff and found i might need another rad support cap if you call it that ... the one ive got is powder coated but its looks bent and little twicked .. will see id i can massage it alittle with out breaking the powder coat if not will start over ...

one peace @ a time

firefighter736 · 11-20-2011, 11:26 PM

Quote:

Originally Posted by Kerlijah

Damn dude, that is one mean lookin truck!! Way cool!!

Thanks, Man! Another shot in front of an old Fire Station in Roanoke.

markeb01 · 11-21-2011, 12:00 AM

That is too cool! It looks like a model car in front of that building! Nice job.

chemlab · 11-21-2011, 12:04 AM

drove mine for the first time today

http://67-72chevytrucks.com/vboard/s...d.php?t=494898

**66ChevyMax** · 11-21-2011, 12:15 AM

Finally started putting parts back on. Waiting for axles to finish rear end rebuild.

**66ChevyMax** · 11-21-2011, 12:16 AM

Very nice truck, geat pic

Quote:

Originally Posted by firefighter736

Finally got the truck road worthy last night and was asked to participate in a photo shoot. Got some really awesome shots of the truck in Roanoke, VA tonight.

srziemkowski · 11-21-2011, 11:49 AM

Painted and installed my glove box door and heater casing i got from a member,also installed the under dash heater casing and installed the knob in the new position,and kind of put together the final look i would like to get on a picture.

kieth · 11-21-2011, 01:09 PM

Installed cheap bed mat to protect the floor of my 66 gmc, along with a cheap tool box to keep things from sliding all over the place in the back of the truck.....floor mats $20.00 each from tractor supply, toolbox off of craigslist for $75.00, tonneau cover from Craftec.....$300.00 No more rain, leaves, etc in the bed of the truck. Kieth

Name: tonn40bedmat.jpg
Views: 606
Size: 86.6 KB

Name: tonn40bedmat.jpg
Views: 606
Size: 86.6 KB

Name: tonn41bedmat.jpg
Views: 588
Size: 36.0 KB

Name: tonn43toolbox.jpg
Views: 596
Size: 38.9 KB

TTACH]831580[/ATTACH]

scotts62 · 11-21-2011, 01:22 PM

thats pretty cool, looks good!

srziemkowski · 11-21-2011, 01:26 PM

I like that the tonneau cover is hinged in front instead of the fixed style.very nice

Woogeroo · 11-21-2011, 07:03 PM

had a flat left rear tire... off and on, plugged and done.

fun.

-W

C4 Metal Werks · 11-21-2011, 07:59 PM

Got my Chromies.

niterider65 · 11-21-2011, 09:35 PM

I went to pick up my sway bar and mounts from the powder coating
today .

Now got to fined the post on how to mount this to my 65 short step . its off an 70 model and ive got the a frames and spindels off the same truck .. just fine some mounting pics showing were to drill .

**pdxhall** · 11-21-2011, 10:16 PM

Quote:

Originally Posted by niterider65

I went to pick up my sway bar and mounts from the powder coating
today .

Now got to fined the post on how to mount this to my 65 short step . its off an 70 model and ive got the a frames and spindels off the same truck .. just fine some mounting pics showing were to drill .

TX Firefighter has a real good thread in the FAQs section. You shouldn't have to drill anything.

niterider65 · 11-21-2011, 10:19 PM

Thanks for the info ill go look @ tx firefighters post
Thanks
Bill

el_bole · 11-22-2011, 06:45 PM

Finally decided to stick with a free short bed stepper....

I was trying to sell it and was going to modify (shorten) a fleet LB but decided the cost wasn't worth it....

I was happily surprised that the mounts on the bed lined up perfectly with the '73 Chassis, whewwww no mods to be done!!! Just bolt 'er in...

The pics are just mock ups, still need to weld new cab mounts to fit my '61 cab;

jbgroby · 11-22-2011, 08:45 PM

Free is GOOD

el_bole · 11-22-2011, 09:01 PM

Quote:

Originally Posted by jbgroby

Free is GOOD

YES my friend, if its free its for me!!!!

This belonged to a lady's ex-husband and she got sick of it being in her

yard so she put it on Craigslist and I snatched it up...Complete with tail

gate

. By the way she was trying to make me take a bunch of chevy stuff but I thought I got enough with the bed...

She said it was rusty, yeah more like just surface rust

....Think I am just gonna spray it the way it is with Hot Rod Flatz Race blue then cab to follow when money tree permits....

Have a good one guys/gals

el_bole · 11-22-2011, 09:04 PM

Quote:

Originally Posted by C4 Metal Werks

Got my Chromies.

How much Chromies send you back? Theres a guy here in San Diego selling some. Im debating whether to picke em up.

el_bole

McCoyAZ · 11-22-2011, 09:50 PM

Packing up the3 bed full of motor, trans, steering column, extra parts I might need, extra parts I don't need and towing my 64 step down to Tucson to my brother's place.

He said he could put it together, but man I just don't know if he can.

Wait and see I guess.

E911manager · 11-24-2011, 12:12 AM

Finished the floor on the cab and undercoated it. Finished the back cab mounts. Painted the caprice frame under where the cab is going to rest.

http://67-72chevytrucks.com/vboard/s...=1#post5027746

rustyrodknocker · 11-24-2011, 12:54 AM

I pulled the passenger side wiper off. since it was flopping around like a lame duck.

Rich 5150 69 · 11-24-2011, 01:01 AM

Quote:

Originally Posted by rustyrodknocker

I pulled the passenger side wiper off. since it was flopping around like a lame duck.

I had plastic wiper arms on the truck when I first bought it in `93, running down the road with traffic raining real hard , I`ve got the wipers on high and the right one flew off and hit the car next to me at the light, thank god the driver had a sense of humor he just started laughing.

11-20-2011, 09:08 PM	#4252
yumyumchoppers Registered User Join Date: Oct 2011 Location: mayberry nc Posts: 11	Re: What did you do to your truck today? got a driveshaft

11-20-2011, 09:46 PM	#4253
niterider65 Registered User Join Date: Jun 2011 Location: colleyville tx Posts: 623	Re: What did you do to your truck today? cleaning more stuff and found i might need another rad support cap if you call it that ... the one ive got is powder coated but its looks bent and little twicked .. will see id i can massage it alittle with out breaking the powder coat if not will start over ... one peace @ a time Attached Images

11-21-2011, 12:00 AM	#4255
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: What did you do to your truck today? That is too cool! It looks like a model car in front of that building! Nice job.

11-21-2011, 12:04 AM	#4256
chemlab Registered User Join Date: Feb 2010 Location: Phoenix, AZ Posts: 114	Re: What did you do to your truck today? drove mine for the first time today http://67-72chevytrucks.com/vboard/s...d.php?t=494898

11-21-2011, 12:15 AM	#4257
66ChevyMax Senior Member Join Date: Oct 2011 Location: Wolfforth, Texas Posts: 976	Re: What did you do to your truck today? Finally started putting parts back on. Waiting for axles to finish rear end rebuild. __________________ Craig 1966 Chevrolet C10 - Supercharged LS3 1968 Chevrolet Camaro 1957 Chevrolet 2dr Hardtop "It makes sence if you don't think about it" Mesquite 1966 C10 - LS3 W/ Air Ride http://67-72chevytrucks.com/vboard/s...=1#post4989763

11-21-2011, 11:49 AM	#4259
srziemkowski Registered User Join Date: Oct 2009 Location: avoca,mi Posts: 230	Re: What did you do to your truck today? Painted and installed my glove box door and heater casing i got from a member,also installed the under dash heater casing and installed the knob in the new position,and kind of put together the final look i would like to get on a picture. Attached Images

11-21-2011, 01:09 PM	#4260
kieth Registered User Join Date: Sep 2010 Location: Tulsa, Oklahoma Posts: 1,925	Re: What did you do to your truck today? Installed cheap bed mat to protect the floor of my 66 gmc, along with a cheap tool box to keep things from sliding all over the place in the back of the truck.....floor mats $20.00 each from tractor supply, toolbox off of craigslist for $75.00, tonneau cover from Craftec.....$300.00 No more rain, leaves, etc in the bed of the truck. Kieth TTACH]831580[/ATTACH] Attached Images

11-21-2011, 01:22 PM	#4261
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: What did you do to your truck today? thats pretty cool, looks good! __________________ Scott 93 crew cab build Project 62

11-21-2011, 01:26 PM	#4262
srziemkowski Registered User Join Date: Oct 2009 Location: avoca,mi Posts: 230	Re: What did you do to your truck today? I like that the tonneau cover is hinged in front instead of the fixed style.very nice

11-21-2011, 07:03 PM	#4263
Woogeroo Registered User Join Date: Aug 2003 Location: tool box Posts: 3,115	Re: What did you do to your truck today? had a flat left rear tire... off and on, plugged and done. fun. -W

11-21-2011, 07:59 PM	#4264
C4 Metal Werks Registered User Join Date: Oct 2011 Location: Chico, CA Posts: 87	Re: What did you do to your truck today? Got my Chromies.

11-21-2011, 09:35 PM	#4265
niterider65 Registered User Join Date: Jun 2011 Location: colleyville tx Posts: 623	Re: What did you do to your truck today? I went to pick up my sway bar and mounts from the powder coating today . Now got to fined the post on how to mount this to my 65 short step . its off an 70 model and ive got the a frames and spindels off the same truck .. just fine some mounting pics showing were to drill . Attached Images

11-21-2011, 10:19 PM	#4267
niterider65 Registered User Join Date: Jun 2011 Location: colleyville tx Posts: 623	Re: What did you do to your truck today? Thanks for the info ill go look @ tx firefighters post Thanks Bill

11-22-2011, 06:45 PM	#4268
el_bole Registered User Join Date: Nov 2010 Location: Chula Vista CA Posts: 195	Re: What did you do to your truck today? Finally decided to stick with a free short bed stepper.... I was trying to sell it and was going to modify (shorten) a fleet LB but decided the cost wasn't worth it.... I was happily surprised that the mounts on the bed lined up perfectly with the '73 Chassis, whewwww no mods to be done!!! Just bolt 'er in... The pics are just mock ups, still need to weld new cab mounts to fit my '61 cab; Attached Images

11-22-2011, 08:45 PM	#4269
jbgroby Registered User Join Date: Nov 2008 Location: Lacombe, LA Posts: 2,770	Re: What did you do to your truck today? Free is GOOD __________________ http://s1299.photobucket.com/user/jb...23904108567829



Register or Log In To remove these advertisements.

11-22-2011, 09:50 PM	#4272
McCoyAZ Registered User Join Date: Aug 2011 Location: Kingman, AZ Posts: 1,574	Re: What did you do to your truck today? Packing up the3 bed full of motor, trans, steering column, extra parts I might need, extra parts I don't need and towing my 64 step down to Tucson to my brother's place. He said he could put it together, but man I just don't know if he can. Wait and see I guess.

11-24-2011, 12:12 AM	#4273
E911manager Registered User Join Date: Oct 2011 Location: Blanchard Oklahoma Posts: 424	Re: What did you do to your truck today? Finished the floor on the cab and undercoated it. Finished the back cab mounts. Painted the caprice frame under where the cab is going to rest. http://67-72chevytrucks.com/vboard/s...=1#post5027746 Attached Images

11-24-2011, 12:54 AM	#4274
rustyrodknocker Registered User Join Date: Dec 2010 Location: salem oregon Posts: 414	Re: What did you do to your truck today? I pulled the passenger side wiper off. since it was flopping around like a lame duck.

Register or Log In To remove these advertisements.