How to: Ruin a perfectly good C10 - Page 18 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gringoloco · 09-14-2011, 12:57 AM

Quote:

Originally Posted by VA72C10

Thanks for the link!!!....did you get the 40'...and did you find the need for the tape?

Welcome!

I bought two 40 footers- coulda gotten by with 1 if I hadn't done the back wall. I liked the tape, but could just as easily have used something else. I bought the big roll and have a TON left over- 3 or 4 small rolls would have been plenty. It will come in handy at some point, I'm sure...

Bennett68C10 · 09-14-2011, 07:00 AM

Thanks for the link its early today and I must be slow but did you buy 2 40 sq. ft. rolls and one big roll of tape? This looks to be a nice cheap alternative to dynamat. I'm very interested.

gringoloco · 09-14-2011, 08:22 AM

Quote:

Originally Posted by Bennett--G4L

Thanks for the link its early today and I must be slow but did you buy 2 40 sq. ft. rolls and one big roll of tape? This looks to be a nice cheap alternative to dynamat. I'm very interested.

Yes, and have plenty of both left over. If I had it to do again, I'd prolly buy less tape, but it was nice not having to worry about running out. I can't really comment on the sound deadening properties, as I used peel 'n' seal first, but the heat blocking is awesome.
Posted via Mobile Device

hgs_notes · 09-14-2011, 09:45 AM

I just ordered some also. I have fat mat down now (almost done anyway) and will lay this over it. BTW, nothing wrong with bright shiny wheels on a patina truck either. Just saying...

coggonobrien · 09-14-2011, 09:59 AM

do you just tape the mat to mat seams or all edges???

gringoloco · 09-14-2011, 10:39 AM

Quote:

Originally Posted by hgs_notes

I just ordered some also. I have fat mat down now (almost done anyway) and will lay this over it. BTW, nothing wrong with bright shiny wheels on a patina truck either. Just saying...

Haha- yeah, I'm really having trouble with the wheel selection... I think you'll be happy with the combination of the two insulators.

Quote:

Originally Posted by coggonobrien

do you just tape the mat to mat seams or all edges???

They suggest taping the seams. I suppose you could do the edges too- I just ran mine out to the edges of the panels...
Posted via Mobile Device

**67cheby** · 09-14-2011, 11:47 AM

i honestly think that is the best job i have ever seen anyone do with the mat..nicely DONE !!

inovermyhead · 09-14-2011, 02:44 PM

Good looking truck man. Can't believe I haven't seen this running the roads before.

gringoloco · 09-14-2011, 06:43 PM

Quote:

Originally Posted by 67cheby

i honestly think that is the best job i have ever seen anyone do with the mat..nicely DONE !!

Thanks! This stuff is really easy to work with- just took my time and measured carefully

Quote:

Originally Posted by inovermyhead

Good looking truck man. Can't believe I haven't seen this running the roads before.

Thanks! It really doesn't get out much, excepting weekends and the occasional trip to/from work.

SCOTI · 09-14-2011, 11:19 PM

Quote:

Originally Posted by gringoloco

Thanks! It really doesn't get out much, excepting weekends and the occasional trip to/from work.

And..... The occasional wedding

.

gringoloco · 09-27-2011, 09:59 PM

A few b-day gifts. More to come...

Posted via Mobile Device
Posted via Mobile Device

mcbassin · 09-28-2011, 12:25 AM

Quote:

Originally Posted by gringoloco

A few b-day gifts. More to come...

Nice! Where did you score these?

VA72C10 · 09-27-2011, 10:05 PM

cool!!!

**67cheby** · 10-03-2011, 02:28 PM

great meeting you and your wife Saturday ! truck looks great

SCOTI · 10-03-2011, 04:51 PM

Quote:

Originally Posted by 67cheby

great meeting you and your wife Saturday ! truck looks great

And so everyone knows..... it looked great AFTER being driven from his place (Shreveport area) to Texas. Much respect my internet friend

.

**67cheby** · 10-03-2011, 04:53 PM

and great meeting you also SCOTI !

Painter D · 10-03-2011, 06:06 PM

I somehow missed out on meeting any new members on Sat. but I did check out your truck :Gringo, I like it. It also says alot that you drove it instead of trailering it. Like SCOTI said, much respect.

**67cheby** · 10-03-2011, 06:18 PM

darn, i thought i met all of the board members that were there, maybe i will be there with my truck in March..LOL, i can dream cant i ??

gearys 5600 · 10-03-2011, 06:24 PM

Nice truck..

gringoloco · 10-03-2011, 06:56 PM

Quote:

Originally Posted by 67cheby

great meeting you and your wife Saturday ! truck looks great

Likewise- we had a great time and enjoyed meeting you guys

Quote:

Originally Posted by SCOTI

And so everyone knows..... it looked great AFTER being driven from his place (Shreveport area) to Texas. Much respect my internet friend

.

Thanks, fellas. Maybe next time I'll be complimenting your trucks

Quote:

Originally Posted by 69chevyshort

I somehow missed out on meeting any new members on Sat. but I did check out your truck :Gringo, I like it. It also says alot that you drove it instead of trailering it. Like SCOTI said, much respect.

Thanks a lot! It was built to be enjoyed. There was a point on the I-state, it was chuggin' along so smoothly, I forgot I was driving an old truck. Kinda fun working all of the bugs out of the ol' girl...

Quote:

Originally Posted by gearys 5600

Nice truck..

Thanks a lot! More to come- we were 'inspired' this weekend

gringoloco · 10-24-2011, 11:16 PM

Boxes in the kitchen...

gringoloco · 10-24-2011, 11:20 PM

Turned into toys in the living room

Please don't mind my grubby finger prints...

gringoloco · 10-24-2011, 11:23 PM

Of course I had to check and make sure the center caps would fit. I'd say they fit better than the chrome caps that came with the wheels- look better too, IMO...

denny5625 · 10-24-2011, 11:26 PM

Very nice!

denny5625 · 10-24-2011, 11:28 PM

Whats the finish on those? looks fairly easy to keep clean.

09-14-2011, 07:00 AM	#2
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: How to: Ruin a perfectly good C10 Thanks for the link its early today and I must be slow but did you buy 2 40 sq. ft. rolls and one big roll of tape? This looks to be a nice cheap alternative to dynamat. I'm very interested. __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

09-14-2011, 09:45 AM	#4
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,121	Re: How to: Ruin a perfectly good C10 I just ordered some also. I have fat mat down now (almost done anyway) and will lay this over it. BTW, nothing wrong with bright shiny wheels on a patina truck either. Just saying... __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

09-14-2011, 09:59 AM	#5
coggonobrien Registered User Join Date: Mar 2008 Location: Coggon, IA Posts: 580	Re: How to: Ruin a perfectly good C10 do you just tape the mat to mat seams or all edges???

09-14-2011, 11:47 AM	#7
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: How to: Ruin a perfectly good C10 i honestly think that is the best job i have ever seen anyone do with the mat..nicely DONE !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

09-14-2011, 02:44 PM	#8
inovermyhead Registered User Join Date: May 2010 Location: Shreveport, LA Posts: 115	Re: How to: Ruin a perfectly good C10 Good looking truck man. Can't believe I haven't seen this running the roads before. __________________ 81 GMC C15 RC SWB 5.3L 4L80E project

09-27-2011, 09:59 PM	#11
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: How to: Ruin a perfectly good C10 A few b-day gifts. More to come... Posted via Mobile Device Posted via Mobile Device __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

09-27-2011, 10:05 PM	#13
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: How to: Ruin a perfectly good C10 cool!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-03-2011, 02:28 PM	#14
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: How to: Ruin a perfectly good C10 great meeting you and your wife Saturday ! truck looks great __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

10-03-2011, 04:53 PM	#16
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: How to: Ruin a perfectly good C10 and great meeting you also SCOTI ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

10-03-2011, 06:06 PM	#17
Painter D Registered User Join Date: Jun 2007 Location: DFW (Forney) Posts: 1,529	Re: How to: Ruin a perfectly good C10 I somehow missed out on meeting any new members on Sat. but I did check out your truck :Gringo, I like it. It also says alot that you drove it instead of trailering it. Like SCOTI said, much respect. __________________ '58 SWB Fleetside...Front & Rear Porterbuilt Dropmember, 6.0 LS /4L60E. Accuair E-level, 20 Billet Specialties (Vintecs) '63 Buick Riviera ... AccuAir E-level, 20" Billet Specialties (Vintecs) http://67-72chevytrucks.com/vboard/s...=528853&page=5

10-03-2011, 06:18 PM	#18
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: How to: Ruin a perfectly good C10 darn, i thought i met all of the board members that were there, maybe i will be there with my truck in March..LOL, i can dream cant i ?? __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

10-03-2011, 06:24 PM	#19
gearys 5600 Registered User Join Date: Mar 2010 Location: tulsa,ok Posts: 1,085	Re: How to: Ruin a perfectly good C10 Nice truck.. __________________ MY BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=423629 1969 custom/10 swb--SOLD 1968 swb 50th anniv.--SOLD 1967 camaro ss/rs..LS-6-speed, 16-year long project 1956 chevy nomad 1955 chevy 210 2-dr sedan 1978 el-camino ss 1-owner

10-24-2011, 11:16 PM	#21
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: How to: Ruin a perfectly good C10 Boxes in the kitchen... Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

10-24-2011, 11:20 PM	#22
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: How to: Ruin a perfectly good C10 Turned into toys in the living room Please don't mind my grubby finger prints... Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

10-24-2011, 11:23 PM	#23
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: How to: Ruin a perfectly good C10 Of course I had to check and make sure the center caps would fit. I'd say they fit better than the chrome caps that came with the wheels- look better too, IMO... Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy



Register or Log In To remove these advertisements.

10-24-2011, 11:26 PM	#24
denny5625 Registered User Join Date: Jul 2007 Location: Kennewick, WA Posts: 152	Re: How to: Ruin a perfectly good C10 Very nice! __________________ 66 el Camino 70 1/2 RS Z-28 71 C10 2wd 72 2 wd Blazer (2) 72 4 x 4 Blazers 88 24' Mirage 70 mph+ 08 Harley Night Train 08 Silverado 4d 4 x 4

10-24-2011, 11:28 PM	#25
denny5625 Registered User Join Date: Jul 2007 Location: Kennewick, WA Posts: 152	Re: How to: Ruin a perfectly good C10 Whats the finish on those? looks fairly easy to keep clean. __________________ 66 el Camino 70 1/2 RS Z-28 71 C10 2wd 72 2 wd Blazer (2) 72 4 x 4 Blazers 88 24' Mirage 70 mph+ 08 Harley Night Train 08 Silverado 4d 4 x 4

Register or Log In To remove these advertisements.