Project: Blank Slate - Page 18 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

short-t · 04-12-2010, 11:36 AM

Quote:

Originally Posted by 72BlckButy

'69 CST-10 "Blank Slate" Wheel/Tire Specs:

Billet Specialties Vintec's
Front: 20x8.5" w/ 5.5" BS
- Center Bore: 3.430
- Bolt Pattern: 6 on 5.5"
Rear: 20x10" w/ 4.75" BS
- Center Bore: 4.250 (due to the center hub on the rear axle of my '69 [meas. 3.5"; BS only offered 3.43])
- Bolt Pattern: 6 on 5.5"

Toyo Proxes S/T ii's
Front: 255/40-20
Rear: 295/40-20

Truck looks amazing! Do you know what rear end is in the truck, narrow or wide?

Thanks, Greg

**Hart_Rod** · 04-12-2010, 02:04 PM

Nate if you decide to bag it, do you think you'll have any clearance problems in the rear? Can you get shot from underneath? Thanks,

R/

72BlckButy · 04-12-2010, 02:50 PM

Rob, I will try to get you a shot sometime this week.

Without modification... yes.
With modification... no.

I weighed out that decision on this truck for over 2 months, and with my dream for this truck I wanted to keep it as stock as possible, without any major modifications. As it sits right now I could replace the drop/wheels and throw on new lower a-arms and you wouldn't even know. That is what I had planned for this truck.... now my next project, well you'll just have to wait for that one.

my67chevytruck · 04-12-2010, 03:19 PM

Nate, the truck looks awesome. I wanted Vintecs but the budget was a lil short so went with the hopsters.... eventually i may go with Vintecs. The truck keeps looking better and better........

big_al_71 · 04-12-2010, 05:04 PM

Quote:

Originally Posted by 72BlckButy

Rob, I will try to get you a shot sometime this week.

Without modification... yes.
With modification... no.

I weighed out that decision on this truck for over 2 months, and with my dream for this truck I wanted to keep it as stock as possible, without any major modifications. As it sits right now I could replace the drop/wheels and throw on new lower a-arms and you wouldn't even know. That is what I had planned for this truck.... now my next project, well you'll just have to wait for that one.

Well Nate let the cat out of the bag, what is this next project you are talking about?

gcburdic · 04-12-2010, 09:34 PM

Yeah....you have said the "next" project several times now....maybe some details....please

*highperf4x4* · 04-12-2010, 10:25 PM

**lolife99** · 04-12-2010, 10:28 PM

Now you have me wondering???

big_al_71 · 04-13-2010, 06:56 AM

<<<<< Sitting tapping fingers on the table waiting for an answer..

BB72CHEVKT · 04-13-2010, 01:37 PM

Come on fess up.

crakarjax · 04-13-2010, 01:54 PM

He's trying to build suspense... a true showman!

72BlckButy · 04-13-2010, 02:22 PM

You guys crack me up.... as of right now there is no 'next' but there will be.

Right now I just have a few more projects to tie up on Blank Slate, and then it will be done. Then we'll see where we're at...

big_al_71 · 04-13-2010, 02:25 PM

Quote:

Originally Posted by 72BlckButy

You guys crack me up.... as of right now there is no 'next' but there will be.

Right now I just have a few more projects to tie up on Blank Slate, and then it will be done. Then we'll see where we're at...

HHHMMMMMM I dont know if I believe you or not...

gcburdic · 04-13-2010, 02:27 PM

Quote:

Originally Posted by 72BlckButy

... now my next project, well you'll just have to wait for that one.

After re-reading this Nate.....I call BS!!!

.....are you running for office of something with that canned answer?!?!

72BlckButy · 04-13-2010, 02:46 PM

"As your next project creater, I promise to... "

crakarjax · 04-13-2010, 06:12 PM

I think you mean loaded answer!

72BlckButy · 04-13-2010, 10:01 PM

djmachinist · 04-21-2010, 11:14 PM

Quote:

Originally Posted by 72BlckButy

You guys crack me up.... as of right now there is no 'next' but there will be.

Right now I just have a few more projects to tie up on Blank Slate, and then it will be done. Then we'll see where we're at...

Nate,

don't stop now! Blank Slate has given me something to shoot for!

Dale

72BlckButy · 04-24-2010, 06:09 PM

Quote:

Originally Posted by djmachinist

Nate,

don't stop now! Blank Slate has given me something to shoot for!

Dale

That means a lot Dale, thank you.

VA72C10 · 04-25-2010, 12:13 AM

Thanks for the Birthday message. Do you have an ETA on the center caps? Wanna see the rims all finished....

72BlckButy · 04-25-2010, 07:54 PM

They have to be mounted and ready to roll by Saturday, so stay tuned.

If it weren't that my two car garage is currently occupied, and if it wasn't raining out, I would have had some updated pictures for everyone.

Nothing like procrastinating...

tcb-1 · 04-25-2010, 08:22 PM

let's think here about this.........

Nato's rig is way to nice to slice and dice, so no major mods pertaining to body or frame. he also digs the fact that he's running a 6 cylinder, so no engine transplants. the interior is perfect, so why mess with a good thing?

sooooooo, I'm guessing:

1. rear discs?
2. the dash has been cut prior to Nato buying it, so maybe an indash flip monitor?
3. Fenton headers?
4. new intake with a 4 barrel?

hummmm? have I a winner??

tommyd241 · 04-25-2010, 08:37 PM

I say build the 6 banger. Does he have power steering and AC?

70k52wd · 04-25-2010, 09:57 PM

Saddleman seat cover? Dats pimp yo.

*highperf4x4* · 04-25-2010, 10:34 PM

Quote:

Originally Posted by 70k52wd

Saddleman seat cover? Dats pimp yo.

04-12-2010, 02:04 PM	#427
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,836	Re: Project: Blank Slate Nate if you decide to bag it, do you think you'll have any clearance problems in the rear? Can you get shot from underneath? Thanks, R/ __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

04-12-2010, 02:50 PM	#428
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Project: Blank Slate Rob, I will try to get you a shot sometime this week. Without modification... yes. With modification... no. I weighed out that decision on this truck for over 2 months, and with my dream for this truck I wanted to keep it as stock as possible, without any major modifications. As it sits right now I could replace the drop/wheels and throw on new lower a-arms and you wouldn't even know. That is what I had planned for this truck.... now my next project, well you'll just have to wait for that one. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

04-12-2010, 03:19 PM	#429
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: Project: Blank Slate Nate, the truck looks awesome. I wanted Vintecs but the budget was a lil short so went with the hopsters.... eventually i may go with Vintecs. The truck keeps looking better and better........ __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

04-12-2010, 09:34 PM	#431
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: Project: Blank Slate Yeah....you have said the "next" project several times now....maybe some details....please __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

04-12-2010, 10:25 PM	#432
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: Project: Blank Slate

04-12-2010, 10:28 PM	#433
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,685	Re: Project: Blank Slate Now you have me wondering??? __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

04-13-2010, 06:56 AM	#434
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Project: Blank Slate <<<<< Sitting tapping fingers on the table waiting for an answer.. __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild Last edited by big_al_71; 04-13-2010 at 01:55 PM.

04-13-2010, 01:37 PM	#435
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,948	Re: Project: Blank Slate Come on fess up. __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400

04-13-2010, 01:54 PM	#436
crakarjax Registered User Join Date: Dec 2009 Location: Kirkland, WA Posts: 1,302	Re: Project: Blank Slate He's trying to build suspense... a true showman! __________________ 1968 LWB C20 / AC / Wood Bed

04-13-2010, 02:22 PM	#437
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Project: Blank Slate You guys crack me up.... as of right now there is no 'next' but there will be. Right now I just have a few more projects to tie up on Blank Slate, and then it will be done. Then we'll see where we're at... __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) Last edited by 72BlckButy; 04-13-2010 at 02:22 PM.

04-13-2010, 02:46 PM	#440
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Project: Blank Slate "As your next project creater, I promise to... " __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) Last edited by 72BlckButy; 04-13-2010 at 02:46 PM.

04-13-2010, 06:12 PM	#441
crakarjax Registered User Join Date: Dec 2009 Location: Kirkland, WA Posts: 1,302	Re: Project: Blank Slate I think you mean loaded answer! __________________ 1968 LWB C20 / AC / Wood Bed

04-13-2010, 10:01 PM	#442
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Project: Blank Slate __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

04-25-2010, 12:13 AM	#445
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Project: Blank Slate Thanks for the Birthday message. Do you have an ETA on the center caps? Wanna see the rims all finished.... __________________ Looking for a 67-72 swb or blazer project in or around VA.

04-25-2010, 07:54 PM	#446
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Project: Blank Slate They have to be mounted and ready to roll by Saturday, so stay tuned. If it weren't that my two car garage is currently occupied, and if it wasn't raining out, I would have had some updated pictures for everyone. Nothing like procrastinating... __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) Last edited by 72BlckButy; 04-25-2010 at 07:54 PM.



Register or Log In To remove these advertisements.

04-25-2010, 08:22 PM	#447
tcb-1 Nothing to see here..... Join Date: Jun 2007 Location: Shawnee, KS Posts: 4,625	Re: Project: Blank Slate let's think here about this......... Nato's rig is way to nice to slice and dice, so no major mods pertaining to body or frame. he also digs the fact that he's running a 6 cylinder, so no engine transplants. the interior is perfect, so why mess with a good thing? sooooooo, I'm guessing: 1. rear discs? 2. the dash has been cut prior to Nato buying it, so maybe an indash flip monitor? 3. Fenton headers? 4. new intake with a 4 barrel? hummmm? have I a winner?? __________________ Doug THANK YOU to our American Soldiers & Veterans - POW MIA "You will NEVER be forgotten". The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson

04-25-2010, 08:37 PM	#448
tommyd241 Registered User Join Date: May 2008 Location: 505 Posts: 447	Re: Project: Blank Slate I say build the 6 banger. Does he have power steering and AC? __________________ '68 SWB Fleetside '98 K1500 Silverado

04-25-2010, 09:57 PM	#449
70k52wd Blaze-Air Join Date: Nov 2008 Location: Virginia Posts: 1,117	Re: Project: Blank Slate Saddleman seat cover? Dats pimp yo.

Register or Log In To remove these advertisements.