Project N2Deep - Page 18 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

nastyc10 · 12-02-2010, 03:08 PM

Truck looks sick man! Looks like you have a hard decision to make. My dream car is a pro-touring 69' camaro. Too bad we can't have one of everything.

**67cheby** · 12-02-2010, 03:13 PM

Quote:

Originally Posted by Raguemoe

Don't you have a Porterbuilt set-up & doesn't that mean you have to go big (bigger than my set-up) or go home. My vista's are the original type wheels from Intro and I think their first soft lip style (7-8 yrs old). You don't want my junk!
Posted via Mobile Device

oh i do want them ....see im pretty old school also , i think 20's are the biggest size i like on these trucks , you have to realize my build is going on 7-8 years also !!!!

**lolife99** · 12-02-2010, 03:17 PM

Looks BEAUTIFUL!
I would have to keep it for at least a year.

ksbrktracer · 12-02-2010, 03:23 PM

I hear ya about what do you keep ..... I have about 20 cars , I have a 69 RS SS camaro and a 67 I want to DSE it, but I also have a 68 pu I want to porterbuilt so what do you do ......?????? But man it would be hard to get rid of.....It looks so good

**kev2809** · 12-02-2010, 03:24 PM

man the truck turned out sick man!

n2billet · 12-02-2010, 08:16 PM

It turned out really NICE, after you get to drive it you might have to hold on to it for a little while....

OK I have to ask: what kit/floor epoxy did you use on your garage floor and does it hold up well?

72BlckButy · 12-02-2010, 09:09 PM

Quote:

Originally Posted by Raguemoe

Don't you have a Porterbuilt set-up & doesn't that mean you have to go big (bigger than my set-up) or go home. My vista's are the original type wheels from Intro and I think their first soft lip style (7-8 yrs old). You don't want my junk!
Posted via Mobile Device

Oh I don't know... I wouldn't mind having that junk '67 with those junk Vistas on it; especially if you're need to decrease the fleet.

Turned out amazing!

**FRENCHBLUE72** · 12-02-2010, 09:29 PM

Turned out awesome man congrats....

Raguemoe · 12-02-2010, 09:36 PM

Quote:

Originally Posted by n2billet

It turned out really NICE, after you get to drive it you might have to hold on to it for a little while....

OK I have to ask: what kit/floor epoxy did you use on your garage floor and does it hold up well?

Thanks I figure it would probably take forever to sell anyways, so at least I can tell the wife I'm trying. I'm def not in a hurry at this point, but will see what happens. BTW anyone ever finish "Swingset" or the other 50th project you sold? I had an epoxy company do the floors, as I tried what was suppose to be one of the best "do-it-yourself" brands at my old house and it looked cheap and started to change color. The guy uses a 4 step process w/clear. Companys name is Superior Epoxy and I believe they are a franchise.

I've only had it a few months, but everything wipes right up!
Posted via Mobile Device

Raguemoe · 12-02-2010, 09:42 PM

Quote:

Originally Posted by 72BlckButy

Oh I don't know... I wouldn't mind having that junk '67 with those junk Vistas on it; especially if you're need to decrease the fleet.

Turned out amazing!

Hey, I never said the 67 was junk!!! Put it this way, I'm choosing to keep the 67 over the project truck. So the pecking order goes as follows 55, 67 and the 72's are a tie. Then you have the new cars with all the plastic and stuff.
Posted via Mobile Device

Raguemoe · 12-03-2010, 02:10 AM

I've been looking at this one!

ksbrktracer · 12-03-2010, 09:24 AM

Nice looking car ......!

**67cheby** · 12-03-2010, 10:29 AM

ya ....thats pretty slick also !!

Raguemoe · 12-04-2010, 03:41 AM

Ok I feel better now. The two things on the truck worried me I took care of today! I adjusted the tailgate & pass side door (both needed work to the stickers). Anyways, after some grinding I got both back into shape and looking good. Next will be the bed to cab adj on the pass side & the hood (both should be easy). Next week I should have the glass installed!

gringoloco · 12-04-2010, 01:10 PM

Looks awesome! Especially the tailgate

Raguemoe · 12-04-2010, 03:43 PM

Thanks again for that tailgate (besides the dent from shipping) it looks brand new!
Posted via Mobile Device

**67cheby** · 12-04-2010, 03:50 PM

hey its Saturday.....i expect some sunlight pics, let us see what that silver looks like in the sun !!

Raguemoe · 12-04-2010, 05:39 PM

I work almost everyday this month (I have 2 sundays and the 25th & 26th off) so you may not see those for awhile!
Posted via Mobile Device

franky69c10 · 12-04-2010, 11:12 PM

Wow so beautiful
Posted via Mobile Device

m6z · 12-06-2010, 02:23 PM

Truck looks great. BTW I'm the one who bought N2Billet's 50th. Slowly making progress...

Raguemoe · 12-06-2010, 02:25 PM

Pics??
Posted via Mobile Device

m6z · 12-06-2010, 02:31 PM

Quote:

Originally Posted by Raguemoe

Pics??
Posted via Mobile Device

click on the build thread in my sig.

Raguemoe · 12-06-2010, 02:35 PM

Found it, thanks!
Posted via Mobile Device

**superflysteiny** · 12-06-2010, 02:51 PM

very nice truck

Raguemoe · 12-25-2010, 08:04 PM

Ok guys I put a deposit down on the 69 so you know what that means! First time I had a chance to pull it out of the garage (it's still dirty from the paint shop).

12-02-2010, 03:08 PM	#426
nastyc10 Registered User Join Date: Aug 2009 Location: Austin, Tx Posts: 516	Re: Project N2Deep Truck looks sick man! Looks like you have a hard decision to make. My dream car is a pro-touring 69' camaro. Too bad we can't have one of everything.

12-02-2010, 03:17 PM	#428
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,685	Re: Project N2Deep Looks BEAUTIFUL! I would have to keep it for at least a year. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

12-02-2010, 03:23 PM	#429
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: Project N2Deep I hear ya about what do you keep ..... I have about 20 cars , I have a 69 RS SS camaro and a 67 I want to DSE it, but I also have a 68 pu I want to porterbuilt so what do you do ......?????? But man it would be hard to get rid of.....It looks so good

12-02-2010, 03:24 PM	#430
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,143	Re: Project N2Deep man the truck turned out sick man! __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

12-02-2010, 08:16 PM	#431
n2billet Village Idiot.... Join Date: Jul 2003 Location: Rowlett, Texas Posts: 1,833	Re: Project N2Deep It turned out really NICE, after you get to drive it you might have to hold on to it for a little while.... OK I have to ask: what kit/floor epoxy did you use on your garage floor and does it hold up well? __________________ http://www.hubgarage.com/mygarage/n2billet -67 SWB Custom Porterbuilt Front and rear 20/22's Hazel Sold -71 StepSide Porterbuilt Stage 2 with 20/22's Stella Mae Sold Last edited by n2billet; 12-02-2010 at 08:19 PM.

12-02-2010, 09:29 PM	#433
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: Project N2Deep Turned out awesome man congrats.... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

12-03-2010, 02:10 AM	#436
Raguemoe Junior Member Join Date: Jan 2007 Location: Highland CA Posts: 742	Re: Project N2Deep I've been looking at this one! Attached Images

12-03-2010, 09:24 AM	#437
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: Project N2Deep Nice looking car ......!

12-03-2010, 10:29 AM	#438
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Project N2Deep ya ....thats pretty slick also !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

12-04-2010, 03:41 AM	#439
Raguemoe Junior Member Join Date: Jan 2007 Location: Highland CA Posts: 742	Re: Project N2Deep Ok I feel better now. The two things on the truck worried me I took care of today! I adjusted the tailgate & pass side door (both needed work to the stickers). Anyways, after some grinding I got both back into shape and looking good. Next will be the bed to cab adj on the pass side & the hood (both should be easy). Next week I should have the glass installed! Last edited by Raguemoe; 12-04-2010 at 12:59 PM.

12-04-2010, 01:10 PM	#440
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: Project N2Deep Looks awesome! Especially the tailgate __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

12-04-2010, 03:43 PM	#441
Raguemoe Junior Member Join Date: Jan 2007 Location: Highland CA Posts: 742	Re: Project N2Deep Thanks again for that tailgate (besides the dent from shipping) it looks brand new! Posted via Mobile Device

12-04-2010, 03:50 PM	#442
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Project N2Deep hey its Saturday.....i expect some sunlight pics, let us see what that silver looks like in the sun !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

12-04-2010, 05:39 PM	#443
Raguemoe Junior Member Join Date: Jan 2007 Location: Highland CA Posts: 742	Re: Project N2Deep I work almost everyday this month (I have 2 sundays and the 25th & 26th off) so you may not see those for awhile! Posted via Mobile Device

12-04-2010, 11:12 PM	#444
franky69c10 chevy runs deep Join Date: Mar 2006 Location: PHOENIX AZ Posts: 1,074	Re: Project N2Deep Wow so beautiful Posted via Mobile Device __________________ RAIDER NATION 1969 c10 swb soon 2 b on the road... My LWB is a SWB now http://67-72chevytrucks.com/vboard/s...d.php?t=498241



Register or Log In To remove these advertisements.

12-06-2010, 02:23 PM	#445
m6z Registered User Join Date: Aug 2008 Location: Pittsburg, KS Posts: 2,466	Re: Project N2Deep Truck looks great. BTW I'm the one who bought N2Billet's 50th. Slowly making progress... __________________ Doug Looking for a 67-72 short bed driver..... Last edited by m6z; 12-06-2010 at 02:24 PM.

12-06-2010, 02:25 PM	#446
Raguemoe Junior Member Join Date: Jan 2007 Location: Highland CA Posts: 742	Re: Project N2Deep Pics?? Posted via Mobile Device

12-06-2010, 02:35 PM	#448
Raguemoe Junior Member Join Date: Jan 2007 Location: Highland CA Posts: 742	Re: Project N2Deep Found it, thanks! Posted via Mobile Device

12-06-2010, 02:51 PM	#449
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Project N2Deep very nice truck __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

12-25-2010, 08:04 PM	#450
Raguemoe Junior Member Join Date: Jan 2007 Location: Highland CA Posts: 742	Re: Project N2Deep Ok guys I put a deposit down on the 69 so you know what that means! First time I had a chance to pull it out of the garage (it's still dirty from the paint shop). Attached Images

Register or Log In To remove these advertisements.