Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA" - Page 19 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Low Elco · 01-22-2015, 10:08 AM

Quote:

Originally Posted by Modges'66

Mike,
Just a small piece of advice when welding your tubs...
My first one didn't turn out so well, because I didn't really have a plan of attack for welding.
on the second tub however, I spot welded it at approximately 1.5" spacing, then let it cool, then welded right next to the previous spots in succession and let it cool, then welded next to the previous spots, and repeated until there was no areas un-welded.
I had virtually no warpage with this technique! and I added in a section in order to widen mine, so I had two seams. The second tub was a slower process, but a lot less (almost none) hammer & dolly work to do in order to make it look good!

To add to this, use a cutoff wheel aND knock the tops off the previous round of tacks. Gives it all more time to cool, and you can see your next round better. Did this on a beer can thin Mazda with no warpage.

**67cheby** · 01-26-2015, 10:29 AM

Quote:

Originally Posted by Low Elco

To add to this, use a cutoff wheel aND knock the tops off the previous round of tacks. Gives it all more time to cool, and you can see your next round better. Did this on a beer can thin Mazda with no warpage.

Thanks for the tips !

**67cheby** · 01-26-2015, 10:34 AM

working on the raising the rear inner fenders and keeping them bolt in also mocked up the inner bedside panels . I am considering turning this into a kit to sell ???

reaper71 · 01-26-2015, 10:59 AM

Looks really cool..

**67cheby** · 01-26-2015, 11:09 AM

Quote:

Originally Posted by reaper71

Looks really cool..

Thanks man !

jlsanborn · 01-26-2015, 11:57 AM

Those panels are going to look killer! Nice work Mike!

**oldman3** · 01-26-2015, 12:00 PM

Sweeeet panel...Jim

Mjminino · 01-26-2015, 08:42 PM

oh hell yeah

cheessee · 01-26-2015, 11:06 PM

Looking good mike

jtp67-72 · 01-26-2015, 11:18 PM

Liken it!!!!

Grizz1963 · 01-27-2015, 04:02 AM

This thread is like another fix in my day.

Looking good so far Mike.

**67cheby** · 01-27-2015, 10:31 AM

Quote:

Originally Posted by jlsanborn

Those panels are going to look killer! Nice work Mike!

thanks !

Quote:

Originally Posted by oldman3

Sweeeet panel...Jim

thank you sir !

Quote:

Originally Posted by Mjminino

oh hell yeah

Gracias !

Quote:

Originally Posted by cheessee

Looking good mike

thank you

Quote:

Originally Posted by jtp67-72

Liken it!!!!

thank you man !

Quote:

Originally Posted by Grizz1963

This thread is like another fix in my day.
LOL, Awesome !
Looking good so far Mike.

Gracias Senors !

BigDaddyV · 01-27-2015, 06:28 PM

Your progress is amazing Mike!!!
I have the itch, just stuck at the moment, waiting on parts and my buddy with the body shop!
Looking really good!!!!

datguy · 01-28-2015, 06:27 PM

Quote:

Originally Posted by 67cheby

working on the raising the rear inner fenders and keeping them bolt in also mocked up the inner bedside panels . I am considering turning this into a kit to sell ???

Id buy one!

**67cheby** · 01-29-2015, 10:16 AM

Quote:

Originally Posted by BigDaddyV

Your progress is amazing Mike!!!
I have the itch, just stuck at the moment, waiting on parts and my buddy with the body shop!
Looking really good!!!!

thanks man !

Quote:

Originally Posted by datguy

Id buy one!

Great , thanks for the input !

**67cheby** · 01-29-2015, 10:18 AM

Made a little more progress widening those LMC Truck rear tubs, widened 4 inches

**67cheby** · 01-29-2015, 10:20 AM

I love how fat they are going to look ! Its not bolted in yet, just setting In so I could shoot a pic

**oldman3** · 01-29-2015, 11:45 AM

Fat tub with sweet panel, is going to look super...Jim

Elliot949 · 01-29-2015, 11:51 AM

Quote:

Originally Posted by 67cheby

I love how fat they are going to look ! Its not bolted in yet, just setting In so I could shoot a pic

Those are looking great Mike...

jtp67-72 · 01-29-2015, 08:33 PM

No this is fat!!!.........just had to do that!!!....lol......after using two to make one would u ever do any other way???.....I bet not!!!..........jovial jim

**67cheby** · 01-29-2015, 09:02 PM

I stand corrected ! ��

jtp67-72 · 01-29-2015, 11:52 PM

Quote:

Originally Posted by 67cheby

I stand corrected ! ��

Yours look great.....after i did the 2 into one deal I swore I would never piece another one out.....side panels should be a hit if u produce them.....jim

shrunken66stroker · 01-30-2015, 01:56 AM

This one has my attention. Can't wait to see those fabbed up side panels.

**clemdaddy** · 01-31-2015, 08:22 AM

man, those tubs are too cool... and the side panels, very creative. can't wait to see them in steel. way to go bro....

**67cheby** · 01-31-2015, 11:46 AM

Quote:

Originally Posted by jtp67-72

Yours look great.....after i did the 2 into one deal I swore I would never piece another one out.....side panels should be a hit if u produce them.....jim

thanks man !

Quote:

Originally Posted by shrunken66stroker

This one has my attention. Can't wait to see those fabbed up side panels.

me too, got to pick up some more metal next week !

Quote:

Originally Posted by clemdaddy

man, those tubs are too cool... and the side panels, very creative. can't wait to see them in steel. way to go bro....

Thanks Clem !

01-26-2015, 10:34 AM	#453
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA" working on the raising the rear inner fenders and keeping them bolt in also mocked up the inner bedside panels . I am considering turning this into a kit to sell ??? Attached Images __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

01-26-2015, 10:59 AM	#454
reaper71 Registered User Join Date: Nov 2011 Location: West Plains Missouri Posts: 2,088	Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA" Looks really cool.. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=645774 Project Orangepeel 52 A.D. http://67-72chevytrucks.com/vboard/s...d.php?t=653337 John's LS 49 dodge http://67-72chevytrucks.com/vboard/s...d.php?t=655780 Blake's 67 GMC LS stepside http://67-72chevytrucks.com/vboard/s...d.php?t=690527 Reed 78 FJ40 Rebuild http://67-72chevytrucks.com/vboard/s...d.php?t=733259 Barger's 78 FJ40

01-26-2015, 11:57 AM	#456
jlsanborn Registered User Join Date: Jun 2011 Location: Spokane, WA Posts: 2,367	Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA" Those panels are going to look killer! Nice work Mike! __________________ '77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776

01-26-2015, 12:00 PM	#457
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,555	Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA" Sweeeet panel...Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

01-26-2015, 08:42 PM	#458
Mjminino Registered User Join Date: Nov 2014 Location: Omaha Posts: 558	Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA" oh hell yeah

01-26-2015, 11:06 PM	#459
cheessee Registered User Join Date: Jan 2015 Location: Mount Juliet, Tn Posts: 138	Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA" Looking good mike

01-26-2015, 11:18 PM	#460
jtp67-72 Registered User Join Date: Apr 2007 Location: dequincy la. Posts: 1,465	Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA" Liken it!!!! __________________ Build thread at http://67-72chevytrucks.com/vboard/s...d.php?t=475791

01-27-2015, 04:02 AM	#461
Grizz1963 Registered User Join Date: Dec 2012 Location: Rochester, KENT Posts: 10,505	Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA" This thread is like another fix in my day. Looking good so far Mike. __________________ MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE.

01-27-2015, 06:28 PM	#463
BigDaddyV Registered User Join Date: Mar 2013 Location: Grand Island, Ne. Posts: 1,110	Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA" Your progress is amazing Mike!!! I have the itch, just stuck at the moment, waiting on parts and my buddy with the body shop! Looking really good!!!! __________________ *J. Vess, 6'6", Gearhead, Welder, Fabricator, Nutcase* 1955 Chevy Stepside "Dudley" My daily http://www.67-72chevytrucks.com/vboa...d.php?t=760288 1972 Chevy C10, Project "Chevro~Layed out" Nether Storm Build Thread http://67-72chevytrucks.com/vboard/s...23#post6007523

01-29-2015, 10:18 AM	#466
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA" Made a little more progress widening those LMC Truck rear tubs, widened 4 inches Attached Images __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

01-29-2015, 10:20 AM	#467
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA" I love how fat they are going to look ! Its not bolted in yet, just setting In so I could shoot a pic Attached Images __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

01-29-2015, 11:45 AM	#468
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,555	Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA" Fat tub with sweet panel, is going to look super...Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

01-29-2015, 08:33 PM	#470
jtp67-72 Registered User Join Date: Apr 2007 Location: dequincy la. Posts: 1,465	Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA" No this is fat!!!.........just had to do that!!!....lol......after using two to make one would u ever do any other way???.....I bet not!!!..........jovial jim Attached Images __________________ Build thread at http://67-72chevytrucks.com/vboard/s...d.php?t=475791

01-29-2015, 09:02 PM	#471
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA" I stand corrected ! �� __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

01-30-2015, 01:56 AM	#473
shrunken66stroker Registered User Join Date: Jan 2008 Location: Las Vegas, Nv Posts: 954	Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA" This one has my attention. Can't wait to see those fabbed up side panels. __________________ http://67-72chevytrucks.com/vboard/s...54#post3194654



Register or Log In To remove these advertisements.

01-31-2015, 08:22 AM	#474
clemdaddy Senior Member Join Date: Oct 2009 Location: Fayetteville, Arkansas Posts: 1,923	Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA" man, those tubs are too cool... and the side panels, very creative. can't wait to see them in steel. way to go bro....

Register or Log In To remove these advertisements.