CA Parting Out 86 Scottsdale 4x4 - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KrazyRay · 10-04-2009, 10:37 PM

Quote:

Originally Posted by mainermikeyd

the 87 gmc any badges, in good usable shape??

The badges are in good condition. I will sell for $12 shipped. Maybe you can give me some advice on how to pull them without removing the front clip. Last time I broke the studs.
pics coming soon. Thanks, Ray

umbra · 10-04-2009, 12:15 PM

Hi. How much for the drivers and passengers side vent window assemblys?

Thanks,

Tristan

cowboy5683 · 10-04-2009, 06:31 PM

That dash looks like its in great condition..how much?

KrazyRay · 10-04-2009, 10:47 PM

Quote:

Originally Posted by umbra

Hi. How much for the drivers and passengers side vent window assemblys?

Thanks,

Tristan

I can do $60 shipped. Thanks, Ray

cowboy5683 · 10-04-2009, 11:14 PM

I definitely want the pad..Lemme know yer plans for ontario and I can meet up with ya and give ya the money..but if all else fails I will pay the shipping..Pm me whenever yer coming down here..SOLD for sure!

umbra · 10-05-2009, 02:26 PM

Quote:

Originally Posted by KrazyRay

I can do $60 shipped. Thanks, Ray

Is this the price for both of the entire assemblies including the frames? If so I will take them. Please let me know!

Thanks,

-Tristan

KrazyRay · 10-05-2009, 05:01 PM

Quote:

Originally Posted by umbra

Is this the price for both of the entire assemblies including the frames? If so I will take them. Please let me know!

Thanks,

-Tristan

Yes it is. PM sent.

cowboy5683 · 10-05-2009, 05:11 PM

Hey Krazy Ray..If you need or want the money for the dash sooner..lemme know..I looked on UPS.com..and if its 20 to 25lbs. or less it should only cost about 25 or 30 to ship to me..Just ground shipping..If ya can find a box that big..lol..ok..lemme know.

mainermikeyd · 10-10-2009, 09:46 AM

Most of the badges I have come across have what they call speed nuts on the back side on the inside of fender, accessibility is tight but is attainable, usually 10mm or 3/8 works. If you have any problems lemme know, or PM me. Thanks Mike

Blake_H · 10-11-2009, 01:43 AM

I saw you have an 87 GMC, is that being pared as well? If so, would you be interested in selling the all the fuel lines from the tank to the TBI?

Thanks,
Blake

KrazyRay · 10-11-2009, 08:43 AM

Quote:

Originally Posted by Blake_H

I saw you have an 87 GMC, is that being pared as well? If so, would you be interested in selling the all the fuel lines from the tank to the TBI?

Thanks,
Blake

yes, I'll check to see if they are good. The engine is gone and the driver side tank is gone. I may not have all of it.

Blake_H · 10-16-2009, 03:16 AM

Any luck with the fuel lines? Thanks!

KrazyRay · 10-16-2009, 10:08 AM

Quote:

Originally Posted by Blake_H

Any luck with the fuel lines? Thanks!

Blake_H, The tbi motor is gone so the fuel lines from the frame to the motor are gone. It appears the lines are still there from the tank to the front cross member if that would help. Thanks, Ray

umbra · 10-16-2009, 01:19 PM

Ray- Got the vent windows. They are in great condition! Thanks for the deal bud!

KrazyRay · 10-16-2009, 05:26 PM

Quote:

Originally Posted by umbra

Ray- Got the vent windows. They are in great condition! Thanks for the deal bud!

umbra, It was a pleasure doing business with you. Thanks so much, Ray

Blake_H · 10-17-2009, 12:38 AM

Ray, that would help tremendously! What do you want for them? Thank you very much!

KrazyRay · 10-17-2009, 01:41 AM

Quote:

Originally Posted by Blake_H

Ray, that would help tremendously! What do you want for them? Thank you very much!

Blake_H, I would like to get $20 for the lines, but shipping might be a problem. What part of Nevada do you live? I'm about 2 hours away from Reno. Thanks, Ray

Blake_H · 10-17-2009, 01:57 AM

Ray, I'm in Reno. I might be able to come down and pick them up. I'll check with the boss and see what the schedules are like. I also will call a couple of friends that live in the greater Sacramento area and see if they are coming up anytime soon. Do you want me to pay for them now, or would you prefer cash in person?

Thanks again,
Blake

bigdnew · 11-15-2009, 05:38 PM

do you still have the side markers. i am also interested in the sections of the door pillar where the door striker bolts. probaly a 4x6 area.

KrazyRay · 11-15-2009, 06:00 PM

Quote:

Originally Posted by bigdnew

do you still have the side markers. i am also interested in the sections of the door pillar where the door striker bolts. probaly a 4x6 area.

I still have the side markers $12 shipped and if you want the door jamb patches I can do them and the markers for $35 shipped. Thanks, Ray

KrazyRay · 11-15-2009, 06:06 PM

pics for old rusty c10

Scootin 81 C20 · 11-15-2009, 07:07 PM

Ray, can I can a pic of the mount for the belts? I just want to make sure that they'll mount the same as my current ones.

bigdnew · 11-15-2009, 07:52 PM

PM sent

sailed2japan · 11-15-2009, 08:37 PM

Sorry, I thought it was a tilter. How much would you want for the pedal assembly and associated goodies to turn a auto to a stick?

KrazyRay · 11-15-2009, 11:35 PM

Quote:

Originally Posted by sailed2japan

Sorry, I thought it was a tilter. How much would you want for the pedal assembly and associated goodies to turn a auto to a stick?

Let me know what all you need. I have everything to do the changeover with a hydraulic clutch....pedals, master cylinder, lines, slave, and bell housing.

10-04-2009, 12:15 PM	#2
umbra Registered User Join Date: Sep 2009 Location: Loxahatchee, FL Posts: 20	Re: Parting Out 86 Scottsdale 4x4 Hi. How much for the drivers and passengers side vent window assemblys? Thanks, Tristan

10-04-2009, 06:31 PM	#3
cowboy5683 Registered User Join Date: Jun 2009 Location: San Bernardino CA Posts: 94	Re: Parting Out 86 Scottsdale 4x4 That dash looks like its in great condition..how much?

10-04-2009, 11:14 PM	#5
cowboy5683 Registered User Join Date: Jun 2009 Location: San Bernardino CA Posts: 94	Re: Parting Out 86 Scottsdale 4x4 I definitely want the pad..Lemme know yer plans for ontario and I can meet up with ya and give ya the money..but if all else fails I will pay the shipping..Pm me whenever yer coming down here..SOLD for sure!

10-05-2009, 05:11 PM	#8
cowboy5683 Registered User Join Date: Jun 2009 Location: San Bernardino CA Posts: 94	Re: Parting Out 86 Scottsdale 4x4 Hey Krazy Ray..If you need or want the money for the dash sooner..lemme know..I looked on UPS.com..and if its 20 to 25lbs. or less it should only cost about 25 or 30 to ship to me..Just ground shipping..If ya can find a box that big..lol..ok..lemme know.

10-10-2009, 09:46 AM	#9
mainermikeyd Registered User Join Date: Sep 2008 Location: Limington, ME Posts: 290	Re: Parting Out 86 Scottsdale 4x4 Most of the badges I have come across have what they call speed nuts on the back side on the inside of fender, accessibility is tight but is attainable, usually 10mm or 3/8 works. If you have any problems lemme know, or PM me. Thanks Mike __________________ Once a Marine Always a Marine OOH-RAH GM Fanatic 1982 K20 4" Rancho lift 350cid, edelbrock performer intake 1405 carb, hedman headers, TH350, " Wheres the MUD!!!!!!!!!!" 1986 c30 camper special 454, th400 (for sale) 1984 K10 Big Ten (project) needs motor 1984 C10 355, 700r4, (project) needs shortbox bed

10-11-2009, 01:43 AM	#10
Blake_H Registered User Join Date: Oct 2009 Location: Redmond, OR Posts: 217	Re: Parting Out 86 Scottsdale 4x4 I saw you have an 87 GMC, is that being pared as well? If so, would you be interested in selling the all the fuel lines from the tank to the TBI? Thanks, Blake

10-16-2009, 03:16 AM	#12
Blake_H Registered User Join Date: Oct 2009 Location: Redmond, OR Posts: 217	Re: Parting Out 86 Scottsdale 4x4 Any luck with the fuel lines? Thanks!

10-16-2009, 01:19 PM	#14
umbra Registered User Join Date: Sep 2009 Location: Loxahatchee, FL Posts: 20	Re: Parting Out 86 Scottsdale 4x4 Ray- Got the vent windows. They are in great condition! Thanks for the deal bud!

10-17-2009, 12:38 AM	#16
Blake_H Registered User Join Date: Oct 2009 Location: Redmond, OR Posts: 217	Re: Parting Out 86 Scottsdale 4x4 Ray, that would help tremendously! What do you want for them? Thank you very much!

10-17-2009, 01:57 AM	#18
Blake_H Registered User Join Date: Oct 2009 Location: Redmond, OR Posts: 217	Re: Parting Out 86 Scottsdale 4x4 Ray, I'm in Reno. I might be able to come down and pick them up. I'll check with the boss and see what the schedules are like. I also will call a couple of friends that live in the greater Sacramento area and see if they are coming up anytime soon. Do you want me to pay for them now, or would you prefer cash in person? Thanks again, Blake

11-15-2009, 05:38 PM	#19
bigdnew Never Satisfied Join Date: Sep 2009 Location: Sherman, Texas Posts: 360	Re: Parting Out 86 Scottsdale 4x4 do you still have the side markers. i am also interested in the sections of the door pillar where the door striker bolts. probaly a 4x6 area.

11-15-2009, 06:06 PM	#21
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting Out 86 Scottsdale 4x4 pics for old rusty c10 Attached Images

11-15-2009, 07:07 PM	#22
Scootin 81 C20 3/4 Ton Rodder Join Date: Jan 2009 Location: Manlius, IL Posts: 1,146	Re: Parting Out 86 Scottsdale 4x4 Ray, can I can a pic of the mount for the belts? I just want to make sure that they'll mount the same as my current ones. __________________ 1981 Chevy Scottsdale C20 "Orange Crush": SOLD 1989 Chevy Silverado K2500: All Stock (For Now), 350 TBI/700R4. DD/Light Duty Toy.

11-15-2009, 07:52 PM	#23
bigdnew Never Satisfied Join Date: Sep 2009 Location: Sherman, Texas Posts: 360	Re: Parting Out 86 Scottsdale 4x4 PM sent

11-15-2009, 08:37 PM	#24
sailed2japan Jonny Join Date: Apr 2008 Location: Outside the Box, Austin,TX Posts: 741	Re: Parting Out 86 Scottsdale 4x4 Sorry, I thought it was a tilter. How much would you want for the pedal assembly and associated goodies to turn a auto to a stick? __________________ 1966 C30, Cummins, stacks, and a flat bed in progress... "Honor.....simply put, A veteran - whether active duty, retired, national guard or reserve is someone who, at one time in his life, wrote a blank check made payable to 'The United States of America', for an amount of 'up to and including his life.' That is Honor, and there are way too many people in this country who no longer understand it." -AEC Hundley USNR



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.