The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board > 67-72 Chevrolet & GMC Pickups Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 02-14-2010, 12:11 AM   #26
Phlebmaster
Registered User
 
Phlebmaster's Avatar
 
Join Date: Nov 2009
Location: Oregon City, OR
Posts: 146
Smile Re: Phlebmaster's 1972 C20 Evolution***56k- NO WAY!

I started the tear down of my new block tonight. I documented each step so this will hopefully be helpful to the next guy.

I also picked up 2 sets of 350 heads and will install them on the new block rather than the 305 heads I am running now. I now have 4 sets of heads, the 305 heads in my truck now, the 896 power pack corvette heads, a set of cracked 487 heads,(good for parts), and a rebuilt set of 624 heads with 1.94/1.50 valves.







Here is a bad picture of the crack that runs from the exhaust valve...


Here are the power pack heads...


Here are the rebuilt 624 heads that I will use on the new block.


__________________
Thanks, Aaron
Life is about making dreams come true, stop dreaming and make life happen.
64 GMC Project MY_YOUTUBE_VIDEOS To keep an opened mind- speculation is devine.
Assumptions always lead to a dead end!
Phlebmaster is offline   Reply With Quote
Old 02-14-2010, 12:11 AM   #27
Phlebmaster
Registered User
 
Phlebmaster's Avatar
 
Join Date: Nov 2009
Location: Oregon City, OR
Posts: 146
Smile Re: Phlebmaster's 1972 C20 Evolution***56k- NO WAY!

Here are the pics of the 350 tear down......And so it begins... lol



Dished 4 valve relief pistons...meh






This looks as it should for an engine that sat for a long time. The stuff is only surface and wiped off easily.


Main bearings are not too bad



Got everything marked and lined up....



I even remembered to mark the main caps before removing them.





__________________
Thanks, Aaron
Life is about making dreams come true, stop dreaming and make life happen.
64 GMC Project MY_YOUTUBE_VIDEOS To keep an opened mind- speculation is devine.
Assumptions always lead to a dead end!
Phlebmaster is offline   Reply With Quote
Old 02-14-2010, 09:32 PM   #28
Phlebmaster
Registered User
 
Phlebmaster's Avatar
 
Join Date: Nov 2009
Location: Oregon City, OR
Posts: 146
Cool Re: Phlebmaster's 1972 C20 Evolution***56k- NO WAY!

Progress!!

Honed the cylinders and degreased the block then painted it. I will rent the cam bearing tool and do some research on how to use it. I also did some block modification based on my research to aid the oil return process and oil flow efficiency from the pump.

Here are the obligatory pics......

These are required texts for this project...thanks Paul!


Put a set of junk heads on so I can protect the cylinders



Opened up the oil return holes in the block.


It did not take much to open both sides up.


Here is the rear main cap where the oil pump mounts...I opened the pick-up tube port up and smoothed out the oil path.

Before...


After...


__________________
Thanks, Aaron
Life is about making dreams come true, stop dreaming and make life happen.
64 GMC Project MY_YOUTUBE_VIDEOS To keep an opened mind- speculation is devine.
Assumptions always lead to a dead end!
Phlebmaster is offline   Reply With Quote
Old 02-14-2010, 09:33 PM   #29
Phlebmaster
Registered User
 
Phlebmaster's Avatar
 
Join Date: Nov 2009
Location: Oregon City, OR
Posts: 146
Talking Re: Phlebmaster's 1972 C20 Evolution***56k- NO WAY!

I also painted the lifter valley...why you ask? Well from what I read it benefits the oil return by decreasing surface tension and allowing the oil to return to the pan much faster. It also looks pretty. I used high temp engine enamel so don't worry about that.











__________________
Thanks, Aaron
Life is about making dreams come true, stop dreaming and make life happen.
64 GMC Project MY_YOUTUBE_VIDEOS To keep an opened mind- speculation is devine.
Assumptions always lead to a dead end!
Phlebmaster is offline   Reply With Quote
Old 02-15-2010, 12:57 AM   #30
70jnktrk
Registered User
 
70jnktrk's Avatar
 
Join Date: Jan 2003
Location: arizona
Posts: 213
Re: Phlebmaster's 1972 C20 Evolution***56k- NO WAY!

Great pictures and the running/up to date progress reports are cool to read...Nice work!
70jnktrk is offline   Reply With Quote
Old 02-15-2010, 12:00 PM   #31
eagleuh1
Registered User
 
eagleuh1's Avatar
 
Join Date: Jul 2009
Location: Russellville, Arkansas
Posts: 1,699
Re: Phlebmaster's 1972 C20 Evolution***56k- NO WAY!

That will be a neat surprise for a future owner to open up his engine and see the inside painted. Never seen that done before. looking good.
eagleuh1 is offline   Reply With Quote
Old 02-15-2010, 12:06 PM   #32
70k52wd
Blaze-Air
 
70k52wd's Avatar
 
Join Date: Nov 2008
Location: Virginia
Posts: 1,117
Re: Phlebmaster's 1972 C20 Evolution***56k- NO WAY!

I have dial up and just realized what the 56k no way means...You ain't kiddin...
70k52wd is offline   Reply With Quote
Old 02-15-2010, 12:42 PM   #33
Phlebmaster
Registered User
 
Phlebmaster's Avatar
 
Join Date: Nov 2009
Location: Oregon City, OR
Posts: 146
Smile Re: Phlebmaster's 1972 C20 Evolution***56k- NO WAY!

Quote:
Originally Posted by 70k52wd View Post
I have dial up and just realized what the 56k no way means...You ain't kiddin...
A picture speaks a thousand words....which is good because my typing skills aren't that great.

Quote:
Originally Posted by eagleuh1 View Post
That will be a neat surprise for a future owner to open up his engine and see the inside painted. Never seen that done before. looking good.
My daughters will be the next owner of my truck so I have to make it pretty.

Thanks for the comments.
__________________
Thanks, Aaron
Life is about making dreams come true, stop dreaming and make life happen.
64 GMC Project MY_YOUTUBE_VIDEOS To keep an opened mind- speculation is devine.
Assumptions always lead to a dead end!
Phlebmaster is offline   Reply With Quote
Old 02-16-2010, 07:18 AM   #34
eagleuh1
Registered User
 
eagleuh1's Avatar
 
Join Date: Jul 2009
Location: Russellville, Arkansas
Posts: 1,699
Re: Phlebmaster's 1972 C20 Evolution***56k- NO WAY!

It'd look purty all painted pink. Besides, with that kind of attention to detail, they'd never have to open her back up. Good work.
eagleuh1 is offline   Reply With Quote
Old 02-16-2010, 05:49 PM   #35
Phlebmaster
Registered User
 
Phlebmaster's Avatar
 
Join Date: Nov 2009
Location: Oregon City, OR
Posts: 146
Smile Re: Phlebmaster's 1972 C20 Evolution***56k- NO WAY!

Quote:
Originally Posted by eagleuh1 View Post
It'd look purty all painted pink. Besides, with that kind of attention to detail, they'd never have to open her back up. Good work.
If she had her way....... Pink with flaming bunnies!! My girls watched too much Monty Python.

Thanks for the compliments.
__________________
Thanks, Aaron
Life is about making dreams come true, stop dreaming and make life happen.
64 GMC Project MY_YOUTUBE_VIDEOS To keep an opened mind- speculation is devine.
Assumptions always lead to a dead end!
Phlebmaster is offline   Reply With Quote
Old 02-23-2010, 04:16 PM   #36
Phlebmaster
Registered User
 
Phlebmaster's Avatar
 
Join Date: Nov 2009
Location: Oregon City, OR
Posts: 146
Smile Re: Phlebmaster's 1972 C20 Evolution***56k- NO WAY!

I am gathering the parts and supplies needed to do this engine right.

Here is my list of what I have:

Hyper Lube assy oil

Moly assy grease

New oil filter

New lifters

New push rods

New timing set

New cam

Rebuilt 350 heads- Thanks to everyone's advice...even Ticker's

Block is honed and cleaned and painted with high temp engine paint.

What I need to get:


Re-ring kit that includes gaskets and bearings...etc...

Piston ring compressor tool for putting in the new rings.

Plastic gauge- and patience with learning how to use it.

I will document the whole process as I assemble the new block and post another video.

I still have to pull a couple of parts from my old block, such as the new water pump I just installed, the fuel pump, and the accessories. I will be upgrading my distributor to the HEI at that time so I will be re-wiring a 12 volt supply from the fuse block. I will ground it to the block.
__________________
Thanks, Aaron
Life is about making dreams come true, stop dreaming and make life happen.
64 GMC Project MY_YOUTUBE_VIDEOS To keep an opened mind- speculation is devine.
Assumptions always lead to a dead end!
Phlebmaster is offline   Reply With Quote
Old 02-26-2010, 05:03 PM   #37
Phlebmaster
Registered User
 
Phlebmaster's Avatar
 
Join Date: Nov 2009
Location: Oregon City, OR
Posts: 146
Re: Phlebmaster's 1972 C20 Evolution***56k- NO WAY!

I finished prepping the block last night by cleaning the paint from the mating surfaces, and did a quick once over on my 350 heads. I will be ditching the 305 heads....keeping my eyes open for a set of better heads down the road.


Everything is waiting on funds for the re-ring kit and a few little items.
__________________
Thanks, Aaron
Life is about making dreams come true, stop dreaming and make life happen.
64 GMC Project MY_YOUTUBE_VIDEOS To keep an opened mind- speculation is devine.
Assumptions always lead to a dead end!

Last edited by Phlebmaster; 02-26-2010 at 05:05 PM.
Phlebmaster is offline   Reply With Quote
Old 03-04-2010, 03:26 PM   #38
Phlebmaster
Registered User
 
Phlebmaster's Avatar
 
Join Date: Nov 2009
Location: Oregon City, OR
Posts: 146
Cool Re: Phlebmaster's 1972 C20 Evolution***56k- NO WAY!

Picked up a better carburetor.

I traded a set of heads for an Edelbrock performer intake and 625 CFM Edelbrock carburetor. This will replace my 500 CFM carb I am running now.

Here are the obligatory pictures....lol







Here are the 350 heads I will be using...


I can't wait to get this thing rumbling!!

__________________
Thanks, Aaron
Life is about making dreams come true, stop dreaming and make life happen.
64 GMC Project MY_YOUTUBE_VIDEOS To keep an opened mind- speculation is devine.
Assumptions always lead to a dead end!
Phlebmaster is offline   Reply With Quote
Old 03-05-2010, 12:41 AM   #39
Phlebmaster
Registered User
 
Phlebmaster's Avatar
 
Join Date: Nov 2009
Location: Oregon City, OR
Posts: 146
Talking Re: Phlebmaster's 1972 C20 Evolution***56k- NO WAY!

I put the carb on my truck tonight and I am impressed! I put on an extra 125 CFM and boy does it make a difference! My other Edelbrock is a 500 CFM and the carb I put on is a 625 CFM.
__________________
Thanks, Aaron
Life is about making dreams come true, stop dreaming and make life happen.
64 GMC Project MY_YOUTUBE_VIDEOS To keep an opened mind- speculation is devine.
Assumptions always lead to a dead end!
Phlebmaster is offline   Reply With Quote
Old 03-05-2010, 04:25 PM   #40
73chevyman
Registered User
 
73chevyman's Avatar
 
Join Date: Nov 2008
Location: Lusby, MD
Posts: 563
Re: Phlebmaster's 1972 C20 Evolution***56k- NO WAY!

I'm impressed with everything ur doing the painting were the oil lies scares me due to fact if it don't hold up it will get into ur parts and possibly start problems. looks great awsome build
__________________
http://67-72chevytrucks.com/vboard/group.php?groupid=37
73 C10 Fleetside
If it ain't a Chevy it's foreign
http://hotridesmag.com/
73chevyman is offline   Reply With Quote
Old 03-05-2010, 04:57 PM   #41
Phlebmaster
Registered User
 
Phlebmaster's Avatar
 
Join Date: Nov 2009
Location: Oregon City, OR
Posts: 146
Re: Phlebmaster's 1972 C20 Evolution***56k- NO WAY!

Quote:
Originally Posted by 73chevyman View Post
I'm impressed with everything ur doing the painting were the oil lies scares me due to fact if it don't hold up it will get into ur parts and possibly start problems. looks great awsome build
Thanks!

You are right about the paint. I was a bit concerned about that too, but I made sure I cleaned the block very well and used the correct type of paint. I have scrubbed on the paint with a brillo pad and it seems to be stuck on there pretty well.
__________________
Thanks, Aaron
Life is about making dreams come true, stop dreaming and make life happen.
64 GMC Project MY_YOUTUBE_VIDEOS To keep an opened mind- speculation is devine.
Assumptions always lead to a dead end!
Phlebmaster is offline   Reply With Quote
Old 03-06-2010, 09:36 PM   #42
Phlebmaster
Registered User
 
Phlebmaster's Avatar
 
Join Date: Nov 2009
Location: Oregon City, OR
Posts: 146
Re: Phlebmaster's 1972 C20 Evolution***56k- NO WAY!

I picked up an old school LT1 intake today!! The engine is getting close to being ready. I test fitted the HEI because I had an idea that there might be clearance issues, and there are. I don't know if I will be able to shim the distributor the 1/4" it needs to clear the top of the rear runner.







__________________
Thanks, Aaron
Life is about making dreams come true, stop dreaming and make life happen.
64 GMC Project MY_YOUTUBE_VIDEOS To keep an opened mind- speculation is devine.
Assumptions always lead to a dead end!
Phlebmaster is offline   Reply With Quote
Old 03-07-2010, 10:15 AM   #43
nuke1
Registered User
 
nuke1's Avatar
 
Join Date: Jun 2007
Location: Saskatoon, Saskatchewan,:
Posts: 2,901
Re: Phlebmaster's 1972 C20 Evolution***56k- NO WAY!

Looks great, as for shimming the distributer that is a bad idea, you loos contact with the oil pump shaft, there would be less contact btn them and the distributer will not mesh as well with the cam, if anything find an old points distributer and put a pertronix ignitor in it, you do not want problems now after all that hard work you have just done.
__________________
James
1968 GMC "HAVOC"
1986 GMC "Frank"
J.J.R.H. Design & Consulting

My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300
A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238
1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361
Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390
Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100
1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587
nuke1 is offline   Reply With Quote
Old 03-07-2010, 11:29 AM   #44
70k52wd
Blaze-Air
 
70k52wd's Avatar
 
Join Date: Nov 2008
Location: Virginia
Posts: 1,117
Re: Phlebmaster's 1972 C20 Evolution***56k- NO WAY!

If you could find a mallory unilite for cheap, that would solve your clearance issue also.
70k52wd is offline   Reply With Quote
Old 03-12-2010, 09:04 PM   #45
Phlebmaster
Registered User
 
Phlebmaster's Avatar
 
Join Date: Nov 2009
Location: Oregon City, OR
Posts: 146
Re: Phlebmaster's 1972 C20 Evolution***56k- NO WAY!

I have pulled the intake off of my engine in my truck to verify that the crack is indeed leaking. I will be picking up the re-ring kit next weekend and assembling my new block.
__________________
Thanks, Aaron
Life is about making dreams come true, stop dreaming and make life happen.
64 GMC Project MY_YOUTUBE_VIDEOS To keep an opened mind- speculation is devine.
Assumptions always lead to a dead end!
Phlebmaster is offline   Reply With Quote
Old 03-20-2010, 09:00 PM   #46
Phlebmaster
Registered User
 
Phlebmaster's Avatar
 
Join Date: Nov 2009
Location: Oregon City, OR
Posts: 146
Smile Re: Phlebmaster's 1972 C20 Evolution***56k- NO WAY!

I decided to get rid of the HEI because I would rather use my new intake. So I traded it....for a almost brand new set of 350 heads that were run an a rock crawler with a 490 lift cam. These heads are set up for a large cam which is good since I have a fairly large one.

Here are the GM Goodwrench valve covers, I am going to use them.


I decided to paint them....even though they did not need it.






Painted the valve covers too. lol






I got a reground crankshaft too. Mine old one was beyond just throwing a new set of bearings and running it. I guess it is better to do it right the first time.


Last but not least...I chased all of the threads on my new block and heads. It is just a good idea

I can't wait to get this beast up and running!!
__________________
Thanks, Aaron
Life is about making dreams come true, stop dreaming and make life happen.
64 GMC Project MY_YOUTUBE_VIDEOS To keep an opened mind- speculation is devine.
Assumptions always lead to a dead end!
Phlebmaster is offline   Reply With Quote
Old 03-25-2010, 11:29 PM   #47
Phlebmaster
Registered User
 
Phlebmaster's Avatar
 
Join Date: Nov 2009
Location: Oregon City, OR
Posts: 146
Re: Phlebmaster's 1972 C20 Evolution***56k- NO WAY!

I finally broke down an purchased a brand new Weiand Stealth intake. This is new technology vs the old school C3BX Z28 style intake I had planed to use.



This intake seems taller than the other intake too.


__________________
Thanks, Aaron
Life is about making dreams come true, stop dreaming and make life happen.
64 GMC Project MY_YOUTUBE_VIDEOS To keep an opened mind- speculation is devine.
Assumptions always lead to a dead end!
Phlebmaster is offline   Reply With Quote
Old 03-27-2010, 01:46 AM   #48
Phlebmaster
Registered User
 
Phlebmaster's Avatar
 
Join Date: Nov 2009
Location: Oregon City, OR
Posts: 146
Talking Re: Phlebmaster's 1972 C20 Evolution***56k- NO WAY!

I picked up the re-ring kit with new mains today from Napa and $134.00 later I have my engine ready to go!



I really like my new intake!!


Got the crank set in.....


Pistons layed out in order....


Lots of assy lube!!....everywhere hehehe


It took some time for me to get the rings on


I checked the gap.


Yay bearings!!




It was finally looking like an engine again.
__________________
Thanks, Aaron
Life is about making dreams come true, stop dreaming and make life happen.
64 GMC Project MY_YOUTUBE_VIDEOS To keep an opened mind- speculation is devine.
Assumptions always lead to a dead end!
Phlebmaster is offline   Reply With Quote
Old 03-27-2010, 01:47 AM   #49
Phlebmaster
Registered User
 
Phlebmaster's Avatar
 
Join Date: Nov 2009
Location: Oregon City, OR
Posts: 146
Wink Re: Phlebmaster's 1972 C20 Evolution***56k- NO WAY!

I put the timing gears in and verified the timing was set where it needs to be to get the engine started.


Speaking of dog bones...I had a little helper. :-)




I adjusted the valves according to my Chiltons manual.


Now I just need to get my old engone out and put the finishing touches on this beast so I can get it into my truck.
__________________
Thanks, Aaron
Life is about making dreams come true, stop dreaming and make life happen.
64 GMC Project MY_YOUTUBE_VIDEOS To keep an opened mind- speculation is devine.
Assumptions always lead to a dead end!
Phlebmaster is offline   Reply With Quote
Old 03-27-2010, 02:57 AM   #50
nuke1
Registered User
 
nuke1's Avatar
 
Join Date: Jun 2007
Location: Saskatoon, Saskatchewan,:
Posts: 2,901
Re: Phlebmaster's 1972 C20 Evolution***56k- NO WAY!

Looks Great, can not wait to see it installed into the truck, should be a decent runner!!!!
__________________
James
1968 GMC "HAVOC"
1986 GMC "Frank"
J.J.R.H. Design & Consulting

My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300
A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238
1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361
Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390
Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100
1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587
nuke1 is offline   Reply With Quote
Reply

Bookmarks

Tags
.470, 305, 350, heads, max lift


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:48 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com