heres my project it has a long ways to go. - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**special-K** · 09-15-2007, 06:10 AM

Bill,I know you have had some nice lookin`trucks in the past.I`m sure another`s on the way.Do you do your own painting?That`s what I wondered ever since I saw the red and white one show up all fresh painted at one time.They looked nice.

billsbowtie · 09-15-2007, 04:01 PM

yes tim i am a shade tree painter mostly just do my own stuff.

billsbowtie · 09-19-2007, 11:25 PM

i have not did much to it sence my grandson has came. po cut the standard trans. crossmember off even with the frame with a torch and i grinded the 2 top left over pieces off this week and still have the bottom to go. i found me a nice bed for it today but have to save up the $'s for it.

re1 · 09-20-2007, 01:15 AM

The frame is looking good,
what paint are you using on it?

billsbowtie · 09-20-2007, 11:29 AM

i am useing urethane.

longhorn70gmc · 09-25-2007, 12:08 PM

Quote:

Originally Posted by re1

The frame is looking good,
what paint are you using on it?

Wow Bill,
Your frame does look really nice. Does the Paint come in a can where you brush it on or is it mix and spray?

billsbowtie · 09-27-2007, 10:56 PM

i got my battery tray,eng. towers, & inner fenders painted today.
guys the black paint is just cheap temp. paint . because i have to work on it in the great out doors i just put the cheaper spray paint on it till i get the hole frame ready to paint with good paint. i will be painting the frame the same color red as the truck. its porshe red i think i mispelled that. it is urethane mixed with reducer and hardner. this is around $200.00 a gallon with reducer and hardner.

billsbowtie · 09-27-2007, 11:01 PM

my inner fenders are new orgi. gm. that i had in my stash.

billsbowtie · 09-29-2007, 11:46 PM

i got the old bed off & got a few more feet of the outer frame cleaned up. i had to cut 1 of the cab mounts off it needs replaced.

billsbowtie · 09-29-2007, 11:46 PM

billsbowtie · 09-29-2007, 11:46 PM

billsbowtie · 09-29-2007, 11:47 PM

billsbowtie · 09-29-2007, 11:48 PM

i started cleaning on the trans. crossmember to.

billsbowtie · 10-11-2007, 07:55 PM

got a little more of the frame cleaned up and some paint on it. i got the rear end and trailing arms off also.

billsbowtie · 10-11-2007, 07:58 PM

billsbowtie · 10-11-2007, 08:01 PM

tranny crossmember under primer.

billsbowtie · 10-15-2007, 10:01 PM

i just like a few places under neith having it all 1 color.

billsbowtie · 10-15-2007, 10:01 PM

gringoloco · 10-16-2007, 01:08 AM

Nice to see you puttin' one together instead of takin' it apart

Good luck -Chris

billsbowtie · 10-16-2007, 11:21 AM

chris i have put a few of them together but mostly took them apart over the years. i am getting older now and thought i better put me 1 together while i can still get good orgi. parts.

billsbowtie · 11-01-2007, 02:36 PM

making a little more progress . i got the frame painted red today.

billsbowtie · 11-01-2007, 02:37 PM

billsbowtie · 11-01-2007, 02:37 PM

70rs/ss · 11-01-2007, 04:45 PM

Hey is that cemetary where you get rid of those that hassle you? (think the horrible neighbor thread!!) That is sweet and just goes to show ya, that you don't need a garage or a shop to do this stuff in. I better get to work on the one I am doing!!

westbrookw · 11-01-2007, 05:14 PM

That is an awesome looking frame. I wish I had a digital camera back when I did the same thing to mine. I would call my buddy who lived behind me every morning around 6 am to help me carry my frame into the back yard where I would sand blast. I work the 3-11 shift so daylight was good. I never left it outside for some reason. Always carried it out by hand. Projects have to start somewhere. You seem to have the means to builds an awesome truck. Keep posting up. You are making me want to take my frame back out and do it the same color as the truck.

09-15-2007, 06:10 AM	#26
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: heres my project it has a long ways to go. Bill,I know you have had some nice lookin`trucks in the past.I`m sure another`s on the way.Do you do your own painting?That`s what I wondered ever since I saw the red and white one show up all fresh painted at one time.They looked nice. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-15-2007, 04:01 PM	#27
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: heres my project it has a long ways to go. yes tim i am a shade tree painter mostly just do my own stuff. __________________ i have 67/72 chevy truck parts f/s.

09-19-2007, 11:25 PM	#28
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: heres my project it has a long ways to go. i have not did much to it sence my grandson has came. po cut the standard trans. crossmember off even with the frame with a torch and i grinded the 2 top left over pieces off this week and still have the bottom to go. i found me a nice bed for it today but have to save up the $'s for it. __________________ i have 67/72 chevy truck parts f/s.

09-20-2007, 01:15 AM	#29
re1 Registered User Join Date: Oct 2005 Location: Metro Vancouver Posts: 444	Re: heres my project it has a long ways to go. The frame is looking good, what paint are you using on it? __________________ 1972 Chevy C10 Custom Deluxe Highlander 1972 Chevy C10 Custom Deluxe Medium Green

09-20-2007, 11:29 AM	#30
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: heres my project it has a long ways to go. i am useing urethane. __________________ i have 67/72 chevy truck parts f/s.

09-27-2007, 10:56 PM	#32
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: heres my project it has a long ways to go. i got my battery tray,eng. towers, & inner fenders painted today. guys the black paint is just cheap temp. paint . because i have to work on it in the great out doors i just put the cheaper spray paint on it till i get the hole frame ready to paint with good paint. i will be painting the frame the same color red as the truck. its porshe red i think i mispelled that. it is urethane mixed with reducer and hardner. this is around $200.00 a gallon with reducer and hardner. __________________ i have 67/72 chevy truck parts f/s.

09-27-2007, 11:01 PM	#33
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: heres my project it has a long ways to go. my inner fenders are new orgi. gm. that i had in my stash. __________________ i have 67/72 chevy truck parts f/s.

09-29-2007, 11:46 PM	#34
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: heres my project it has a long ways to go. i got the old bed off & got a few more feet of the outer frame cleaned up. i had to cut 1 of the cab mounts off it needs replaced. __________________ i have 67/72 chevy truck parts f/s.

09-29-2007, 11:47 PM	#37
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: heres my project it has a long ways to go. __________________ i have 67/72 chevy truck parts f/s.

09-29-2007, 11:48 PM	#38
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: heres my project it has a long ways to go. i started cleaning on the trans. crossmember to. __________________ i have 67/72 chevy truck parts f/s.

10-11-2007, 07:55 PM	#39
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: heres my project it has a long ways to go. got a little more of the frame cleaned up and some paint on it. i got the rear end and trailing arms off also. __________________ i have 67/72 chevy truck parts f/s.

10-11-2007, 07:58 PM	#40
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: heres my project it has a long ways to go. __________________ i have 67/72 chevy truck parts f/s.

10-11-2007, 08:01 PM	#41
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: heres my project it has a long ways to go. tranny crossmember under primer. __________________ i have 67/72 chevy truck parts f/s.

10-15-2007, 10:01 PM	#42
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: heres my project it has a long ways to go. i just like a few places under neith having it all 1 color. __________________ i have 67/72 chevy truck parts f/s.

10-16-2007, 01:08 AM	#44
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: heres my project it has a long ways to go. Nice to see you puttin' one together instead of takin' it apart Good luck -Chris __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy



Register or Log In To remove these advertisements.

10-16-2007, 11:21 AM	#45
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: heres my project it has a long ways to go. chris i have put a few of them together but mostly took them apart over the years. i am getting older now and thought i better put me 1 together while i can still get good orgi. parts. __________________ i have 67/72 chevy truck parts f/s.

11-01-2007, 02:36 PM	#46
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: heres my project it has a long ways to go. making a little more progress . i got the frame painted red today. __________________ i have 67/72 chevy truck parts f/s.

11-01-2007, 02:37 PM	#47
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: heres my project it has a long ways to go. __________________ i have 67/72 chevy truck parts f/s.

11-01-2007, 04:45 PM	#49
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,271	Re: heres my project it has a long ways to go. Hey is that cemetary where you get rid of those that hassle you? (think the horrible neighbor thread!!) That is sweet and just goes to show ya, that you don't need a garage or a shop to do this stuff in. I better get to work on the one I am doing!!

11-01-2007, 05:14 PM	#50
westbrookw LET'S GO...MOUNTAINEERS Join Date: Oct 2007 Location: Williamstown, WV Posts: 339	Re: heres my project it has a long ways to go. That is an awesome looking frame. I wish I had a digital camera back when I did the same thing to mine. I would call my buddy who lived behind me every morning around 6 am to help me carry my frame into the back yard where I would sand blast. I work the 3-11 shift so daylight was good. I never left it outside for some reason. Always carried it out by hand. Projects have to start somewhere. You seem to have the means to builds an awesome truck. Keep posting up. You are making me want to take my frame back out and do it the same color as the truck.

Register or Log In To remove these advertisements.