DJ JR's Build Thread - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Hoods69BadBowTie · 03-01-2010, 06:24 AM

Quote:

Originally Posted by djracer

Bout 4.

I saw a picture from that somewhere. He was sittin up on a rock hittin on the teenage girls.

Nice lol getting em started at a young age! Aw girls n trucks oh and some cold ones haha that's the good life

djracer · 04-12-2010, 08:52 AM

Not much but a little progress.

Cade, Josh and I got the winsheild installed. We also mocked up the seat to see how it fit. I think I'm gonna like the seat.

**Hart_Rod** · 04-12-2010, 09:09 AM

The seat looks good and the color goes well with the paint.

Shon · 04-12-2010, 09:34 AM

Awesome!

djracer · 04-12-2010, 10:59 AM

The color is a little hard to tell with all the bright sunshine but I'm not complaining about sunshine. I asked Cade if he wanted grey or tan and he chose grey. The seat came from a mid 90's suburban 2nd row. Thanks for pulling it Mrchevy4x4.

djracer · 04-12-2010, 10:38 PM

Here's a better color shot of the seat.

djracer · 04-12-2010, 10:40 PM

Someone used the back glass on their welding table.

We swapped it for junk yard special looks much better.

djracer · 04-12-2010, 10:46 PM

Cade and I started cutting the plastic wood for the bed.

djracer · 04-12-2010, 10:51 PM

We have a pretty nice cluster but

I had a pretty nice used circuit board so Cade and I installed it.

I KNOW HE NEEDS A HAIRCUT BAD!!!!!!!!!!!!!!!!!!!!!

noonzor · 04-13-2010, 09:41 PM

awesome, welcome to the board buddy! love the truck and big fan of the color too. ill be paying attention to this build for sure!

'72customdeluxe · 04-14-2010, 06:45 PM

You can't let your college preference get in the way of the beauty of huggar orange

I want to go to a losing maroon school but mine is staying orange.. 267 2-barrel and 3.08 rear gears for new driver safety right

shawnt · 04-15-2010, 02:03 PM

Good starter truck. Welcome Cade! I hope this truck is everything you want it to be and more!

Shawn

**Yukon Jack** · 04-15-2010, 02:15 PM

What an awesome truck you're starting with - you and your dad will have a blast on this project I'm sure.

69trk · 04-15-2010, 09:47 PM

I love the color, but living here in oklahoma and being a sooner fan i can't have anything that color

dragula · 04-16-2010, 01:35 AM

I remember I got my first truck at 13 76 Chevy step side been at it ever since !! That is one super nice truck I'm a little jealous !! Here's a little joke about the hair. Jr. comes up to dad and say's next week I turn 16 and want to get my license. Dad say's you're not gettin your license until you cut that hair cut. Jr. think's about it a minute and say's , but dad Jesus had long hair !! Dad say's yeah and he walked everywhere he went too !! LOL

djracer · 04-16-2010, 06:54 AM

That's pretty good.

scatesracing · 04-16-2010, 09:56 AM

Sweet truck Cade..... Hey dad leave him alone his hair isnt hurting anybody..LOL

Rodms · 04-20-2010, 04:52 PM

I know that can't be UT orange,I didn't think anyone painted anything orange around here!Nice truck it will come together,and we do have some barber shops still around here,HAHA

jgh64pkup · 04-24-2010, 12:24 AM

cade
glad to see another young guy on here

caviness · 05-24-2010, 10:47 PM

ready for the updates

made2drag · 06-02-2010, 07:42 PM

looking good so far. cant wait to see it on the roads in wetumpka. schools out, i bet there is work being done to it as i type. this truck will be nice.

aggie91 · 06-04-2010, 04:34 PM

Welcome to the board Cade! Looks like you got a great start with that truck. Dad sounds like he is going to have fun with it too.

I hope to start my son's truck later this year, he will be 13 in about a week...currently baseball take most of our time.

Keep us posted on your progress.

Rodms · 06-18-2010, 12:10 AM

DJ,and BigC you need to update the progress,let me know what parts you need I been hauling stuff off to the scrap yard in the last couple weeks!

djracer · 06-18-2010, 05:22 AM

I got a new job and have to go to school for 4 months so progress is slow. I have been gathering parts but I am also working on the drag truck so its tough right this second. Thanks for the offer I will try to think about what we need.

djracer · 06-27-2010, 08:54 AM

Happy Early Birthday Cade I bought these for you last night. I sold my new amp for my truck and bought these headers cause I thought they were a deal.

http://cgi.ebay.com/ebaymotors/ws/eB...#ht_1939wt_939

This is what I want to buy next.

http://www.performanceonline.com/196...KIT-TCM6372-D/

04-12-2010, 08:52 AM	#27
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: DJ JR's Build Thread Not much but a little progress. Cade, Josh and I got the winsheild installed. We also mocked up the seat to see how it fit. I think I'm gonna like the seat. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

04-12-2010, 09:09 AM	#28
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,856	Re: DJ JR's Build Thread The seat looks good and the color goes well with the paint. __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

04-12-2010, 09:34 AM	#29
Shon Registered User Join Date: Sep 2005 Location: sc Posts: 1,203	Re: DJ JR's Build Thread Awesome! __________________ 71 Cheyenne C10 LWB cam'd 6.0/T56 Swap

04-12-2010, 10:59 AM	#30
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: DJ JR's Build Thread The color is a little hard to tell with all the bright sunshine but I'm not complaining about sunshine. I asked Cade if he wanted grey or tan and he chose grey. The seat came from a mid 90's suburban 2nd row. Thanks for pulling it Mrchevy4x4. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

04-12-2010, 10:38 PM	#31
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: DJ JR's Build Thread Here's a better color shot of the seat. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

04-12-2010, 10:40 PM	#32
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: DJ JR's Build Thread Someone used the back glass on their welding table. We swapped it for junk yard special looks much better. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole! Last edited by djracer; 04-12-2010 at 10:41 PM.

04-12-2010, 10:46 PM	#33
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: DJ JR's Build Thread Cade and I started cutting the plastic wood for the bed. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

04-12-2010, 10:51 PM	#34
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: DJ JR's Build Thread We have a pretty nice cluster but I had a pretty nice used circuit board so Cade and I installed it. I KNOW HE NEEDS A HAIRCUT BAD!!!!!!!!!!!!!!!!!!!!! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole! Last edited by djracer; 04-12-2010 at 10:52 PM.

04-13-2010, 09:41 PM	#35
noonzor Registered User Join Date: Aug 2009 Location: Edmonton, Alberta Posts: 818	Re: DJ JR's Build Thread awesome, welcome to the board buddy! love the truck and big fan of the color too. ill be paying attention to this build for sure! __________________ 69 c10 Shortbox Build http://67-72chevytrucks.com/vboard/s...d.php?t=360622

04-14-2010, 06:45 PM	#36
'72customdeluxe Registered User Join Date: Jan 2008 Location: Tejas Posts: 691	Re: DJ JR's Build Thread You can't let your college preference get in the way of the beauty of huggar orange I want to go to a losing maroon school but mine is staying orange.. 267 2-barrel and 3.08 rear gears for new driver safety right __________________ '72 cheyenne super step, '05 long bed gmc

04-15-2010, 02:03 PM	#37
shawnt Registered User Join Date: Sep 2008 Location: sulphur springs texas Posts: 141	Re: DJ JR's Build Thread Good starter truck. Welcome Cade! I hope this truck is everything you want it to be and more! Shawn __________________ Shawn 85 SWB 7.39 @ 93 Best so far with 0 tuning Lesson in life: Never fry bacon naked!

04-15-2010, 02:15 PM	#38
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,684	Re: DJ JR's Build Thread What an awesome truck you're starting with - you and your dad will have a blast on this project I'm sure. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

04-15-2010, 09:47 PM	#39
69trk Registered User Join Date: Oct 2006 Location: bridgecreek ok. Posts: 1,214	Re: DJ JR's Build Thread I love the color, but living here in oklahoma and being a sooner fan i can't have anything that color __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=494388 431 big block times, changed to a 6.0 ls with turbo 1.58- 60' 7.18- 1/8th mile@95.18 11.37- 1/4 @115.81

04-16-2010, 01:35 AM	#40
dragula Registered User Join Date: Jan 2009 Location: ky Posts: 23	Re: DJ JR's Build Thread I remember I got my first truck at 13 76 Chevy step side been at it ever since !! That is one super nice truck I'm a little jealous !! Here's a little joke about the hair. Jr. comes up to dad and say's next week I turn 16 and want to get my license. Dad say's you're not gettin your license until you cut that hair cut. Jr. think's about it a minute and say's , but dad Jesus had long hair !! Dad say's yeah and he walked everywhere he went too !! LOL

04-16-2010, 06:54 AM	#41
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: DJ JR's Build Thread That's pretty good. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!



Register or Log In To remove these advertisements.

04-16-2010, 09:56 AM	#42
scatesracing Machinist Join Date: Sep 2007 Location: Derby Kansas Posts: 296	Re: DJ JR's Build Thread Sweet truck Cade..... Hey dad leave him alone his hair isnt hurting anybody..LOL

04-20-2010, 04:52 PM	#43
Rodms Registered User Join Date: Jul 2008 Location: Olive Branch,Mississippi Posts: 347	Re: DJ JR's Build Thread I know that can't be UT orange,I didn't think anyone painted anything orange around here!Nice truck it will come together,and we do have some barber shops still around here,HAHA __________________ Built chevy tuff!

04-24-2010, 12:24 AM	#44
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: DJ JR's Build Thread cade glad to see another young guy on here __________________ Gage 1967 C10 Shortbed Stepside

05-24-2010, 10:47 PM	#45
caviness Registered User Join Date: Oct 2009 Location: Liberty,NC Posts: 38	Re: DJ JR's Build Thread ready for the updates

06-02-2010, 07:42 PM	#46
made2drag Registered User Join Date: Nov 2009 Location: alabama Posts: 2,079	Re: DJ JR's Build Thread looking good so far. cant wait to see it on the roads in wetumpka. schools out, i bet there is work being done to it as i type. this truck will be nice.

06-04-2010, 04:34 PM	#47
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: DJ JR's Build Thread Welcome to the board Cade! Looks like you got a great start with that truck. Dad sounds like he is going to have fun with it too. I hope to start my son's truck later this year, he will be 13 in about a week...currently baseball take most of our time. Keep us posted on your progress. __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

06-18-2010, 12:10 AM	#48
Rodms Registered User Join Date: Jul 2008 Location: Olive Branch,Mississippi Posts: 347	Re: DJ JR's Build Thread DJ,and BigC you need to update the progress,let me know what parts you need I been hauling stuff off to the scrap yard in the last couple weeks! __________________ Built chevy tuff!

06-18-2010, 05:22 AM	#49
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: DJ JR's Build Thread I got a new job and have to go to school for 4 months so progress is slow. I have been gathering parts but I am also working on the drag truck so its tough right this second. Thanks for the offer I will try to think about what we need. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

06-27-2010, 08:54 AM	#50
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: DJ JR's Build Thread Happy Early Birthday Cade I bought these for you last night. I sold my new amp for my truck and bought these headers cause I thought they were a deal. http://cgi.ebay.com/ebaymotors/ws/eB...#ht_1939wt_939 This is what I want to buy next. http://www.performanceonline.com/196...KIT-TCM6372-D/ __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole! Last edited by djracer; 06-27-2010 at 09:00 AM.

Register or Log In To remove these advertisements.