CA Parting out 84 Chevy 3/4 ton 4x4* - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DBLSPRT68 · 02-02-2010, 10:56 PM

Quote:

Originally Posted by KrazyRay

The carb is a Q jet style. Its relatively new but the PO said that it was too big for a stock 350. I think he said it was 800 but I doubt it is that big. Any ideas to find out size? I will do $100 shipped on that carb and I will verify the running condition when I start up the engine. Thanks, Ray

Ray, did you ever get it started and running? Still interested in the carb. Let me know. David

KrazyRay · 02-03-2010, 01:31 AM

Quote:

Originally Posted by DBLSPRT68

Ray, did you ever get it started and running? Still interested in the carb. Let me know. David

I'm still using the carb. I should probably sell it because I can use the money right now. I better check to see who wanted the carb first as per the site rules. Thanks, Ray

DBLSPRT68 · 02-12-2010, 02:08 AM

Quote:

Originally Posted by KrazyRay

I'm still using the carb. I should probably sell it because I can use the money right now. I better check to see who wanted the carb first as per the site rules. Thanks, Ray

Ray, got the carb today. Great job on the packing!!!! Looks great!!! Thanks for the deal!!!! PS. I know about these carbs. I bought 2 of them new. Over $500.00 each

. Had problems with the first one on my 68 Camaro and sent it back, got a rebuilt one in return(not too happy about that). Second one is still on my truck right now, and runs great. This one will be a good spare, and will sit on my spare 350. You never know when your going to find a cool car that just needs a Chevy heart

transplant. Edlebrock only made these for a few years and stopped.

Scootin 81 C20 · 12-15-2009, 11:41 PM

Ray, how much for the dash speaker brackets and all the hardware for them?

*Stitch* · 12-15-2009, 11:58 PM

Can you put both of these seatbelt covers in my box too and I need a price...thanks

http://www.67-72chevytrucks.com/vboa...1&d=1260926888

http://www.67-72chevytrucks.com/vboa...1&d=1260934540

2badgn · 12-16-2009, 07:37 AM

How much for the interior dome light with all the harnessing to the fuse box?

Thanks
Frank
Is the cargo light still available? Does the price include the harness and switch?
Maz18@verizon.net

KrazyRay · 12-16-2009, 10:48 AM

Quote:

Originally Posted by 2badgn

How much for the interior dome light with all the harnessing to the fuse box?

Thanks
Frank
Is the cargo light still available? Does the price include the harness and switch?
Maz18@verizon.net

Yes, the price includes harness and switch. WestButteTruck is first in line. I will check another truck for dome light with harness. If I have one it will be $20 shipped. Thanks, Ray

2badgn · 12-16-2009, 05:49 PM

Quote:

Originally Posted by KrazyRay

Yes, the price includes harness and switch. WestButteTruck is first in line. I will check another truck for dome light with harness. If I have one it will be $20 shipped. Thanks, Ray

I am very interested in the interior dome light with the complete harness to the fuse box. My truck is currently at the body shop being restored so time is of the essence! If u locate it, please let me know asap. Thanks. I can do without the cargo light but it would be great to have a dome light as my 84 GMC did not come with one. It only has a light at the bottom that u must operate manually.

Frank
maz18@verizon.net

2badgn · 12-21-2009, 09:08 PM

Quote:

Originally Posted by 2badgn

I am very interested in the interior dome light with the complete harness to the fuse box. My truck is currently at the body shop being restored so time is of the essence! If u locate it, please let me know asap. Thanks. I can do without the cargo light but it would be great to have a dome light as my 84 GMC did not come with one. It only has a light at the bottom that u must operate manually.

Frank
maz18@verizon.net

Any luck on finding this interior dome light with the harness?

thanks

KrazyRay · 12-22-2009, 03:32 PM

Pic of dome light and harness.

Scootin 81 C20 · 12-16-2009, 09:05 PM

Ok, I'll pass on the gauges as mine all work. I was hoping that one would be a small tach, I'm looking for one if you have one. Still interested in the speaker brackets though.

alf4444 · 12-16-2009, 10:54 PM

56" rear springs? How much shipped to 84118?

KrazyRay · 12-18-2009, 01:32 AM

Quote:

Originally Posted by alf4444

56" rear springs? How much shipped to 84118?

Sorry, the springs went with the back end of the frame.

Scootin 81 C20 · 12-18-2009, 09:04 AM

Any news on the speaker brackets?

Thanks
Benjamin.

KrazyRay · 12-18-2009, 11:46 AM

Quote:

Originally Posted by Scootin 81 C20

Any news on the speaker brackets?

Thanks
Benjamin.

I haven't had a chance to pull them, but I'm looking for $5 each plus shipping. Thanks, Ray

Scootin 81 C20 · 12-18-2009, 05:30 PM

Ok, so about $12-$15?

KrazyRay · 12-18-2009, 10:44 PM

Quote:

Originally Posted by Scootin 81 C20

Ok, so about $12-$15?

I'm hoping to be able to stuff them in a small flat rate box for $5 unless you have ideas to save on shipping. Thanks, Ray

Scootin 81 C20 · 12-18-2009, 10:53 PM

Is that the smallest rate they have? If so, so be it. I don't really have any ideas unless you can think of anything else I could use or need to make the shipping worth it.

KrazyRay · 12-20-2009, 11:52 PM

Quote:

Originally Posted by Scootin 81 C20

Is that the smallest rate they have? If so, so be it. I don't really have any ideas unless you can think of anything else I could use or need to make the shipping worth it.

If you want the speaker brackets, I can throw some free stuff in the box to make it worth your while. Browse my threads and find something that will fit inside the brackets. Good Luck, Ray

Dudewith4x4 · 12-20-2009, 10:41 PM

I would buy the gauge holder or what you call the bezel I guess. Also the billet grille.

KrazyRay · 12-20-2009, 11:45 PM

Quote:

Originally Posted by Dudewith4x4

I would buy the gauge holder or what you call the bezel I guess. Also the billet grille.

The gauge bezel shipped to Mo would be $32 total shipped. The billet grill is a flimsy piece of crap that is bowed in the center. I don't recommend this for anyone. Thanks, Ray

Dudewith4x4 · 12-20-2009, 11:47 PM

would you go any cheaper?

*Stitch* · 12-21-2009, 12:48 AM

Quote:

Originally Posted by Dudewith4x4

would you go any cheaper?

he's only selling it for $20 plus shipping...that's a pretty good deal on a bezel that hasn't been cut and in alright shape...I paid $40 plus shipping for one that had been cut for a cd player and was in that shape...so you're actually getting a better deal...

KrazyRay · 12-21-2009, 01:02 AM

Quote:

Originally Posted by Dudewith4x4

would you go any cheaper?

The best I can do is $30 shipped. Thanks, Ray

Scootin 81 C20 · 12-21-2009, 12:06 AM

Ok, that'll work. If it will fit in the box, I could use a new rear window latch, a indicator needle for the shifter, and the little knobs for the heater controls.

12-15-2009, 11:41 PM	#4
Scootin 81 C20 3/4 Ton Rodder Join Date: Jan 2009 Location: Manlius, IL Posts: 1,146	Re: Parting out 84 Chevy 3/4 ton 4x4 Ray, how much for the dash speaker brackets and all the hardware for them? __________________ 1981 Chevy Scottsdale C20 "Orange Crush": SOLD 1989 Chevy Silverado K2500: All Stock (For Now), 350 TBI/700R4. DD/Light Duty Toy.

12-15-2009, 11:58 PM	#5
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: Parting out 84 Chevy 3/4 ton 4x4 Can you put both of these seatbelt covers in my box too and I need a price...thanks http://www.67-72chevytrucks.com/vboa...1&d=1260926888 http://www.67-72chevytrucks.com/vboa...1&d=1260934540

12-16-2009, 07:37 AM	#6
2badgn Registered User Join Date: Nov 2009 Location: Yonkers, NY Posts: 276	Re: Parting out 84 Chevy 3/4 ton 4x4 How much for the interior dome light with all the harnessing to the fuse box? Thanks Frank Is the cargo light still available? Does the price include the harness and switch? Maz18@verizon.net

12-22-2009, 03:32 PM	#10
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting out 84 Chevy 3/4 ton 4x4 Pic of dome light and harness. Attached Images

12-16-2009, 09:05 PM	#11
Scootin 81 C20 3/4 Ton Rodder Join Date: Jan 2009 Location: Manlius, IL Posts: 1,146	Re: Parting out 84 Chevy 3/4 ton 4x4 Ok, I'll pass on the gauges as mine all work. I was hoping that one would be a small tach, I'm looking for one if you have one. Still interested in the speaker brackets though. __________________ 1981 Chevy Scottsdale C20 "Orange Crush": SOLD 1989 Chevy Silverado K2500: All Stock (For Now), 350 TBI/700R4. DD/Light Duty Toy.

12-16-2009, 10:54 PM	#12
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	Re: Parting out 84 Chevy 3/4 ton 4x4 56" rear springs? How much shipped to 84118? __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

12-18-2009, 09:04 AM	#14
Scootin 81 C20 3/4 Ton Rodder Join Date: Jan 2009 Location: Manlius, IL Posts: 1,146	Re: Parting out 84 Chevy 3/4 ton 4x4 Any news on the speaker brackets? Thanks Benjamin. __________________ 1981 Chevy Scottsdale C20 "Orange Crush": SOLD 1989 Chevy Silverado K2500: All Stock (For Now), 350 TBI/700R4. DD/Light Duty Toy.

12-18-2009, 05:30 PM	#16
Scootin 81 C20 3/4 Ton Rodder Join Date: Jan 2009 Location: Manlius, IL Posts: 1,146	Re: Parting out 84 Chevy 3/4 ton 4x4 Ok, so about $12-$15? __________________ 1981 Chevy Scottsdale C20 "Orange Crush": SOLD 1989 Chevy Silverado K2500: All Stock (For Now), 350 TBI/700R4. DD/Light Duty Toy.

12-18-2009, 10:53 PM	#18
Scootin 81 C20 3/4 Ton Rodder Join Date: Jan 2009 Location: Manlius, IL Posts: 1,146	Re: Parting out 84 Chevy 3/4 ton 4x4 Is that the smallest rate they have? If so, so be it. I don't really have any ideas unless you can think of anything else I could use or need to make the shipping worth it. __________________ 1981 Chevy Scottsdale C20 "Orange Crush": SOLD 1989 Chevy Silverado K2500: All Stock (For Now), 350 TBI/700R4. DD/Light Duty Toy.

12-20-2009, 10:41 PM	#20
Dudewith4x4 Momma Tried. Join Date: Dec 2009 Location: Exeter Mo Posts: 319	Re: Parting out 84 Chevy 3/4 ton 4x4 I would buy the gauge holder or what you call the bezel I guess. Also the billet grille. __________________ *Ross* 1980 c10 4x4 project (Sold):http://67-72chevytrucks.com/vboard/s...d.php?t=377155 1999 F-150 4x4 (DD) Saving up for a 64 17 and loving it. AlphaDamp Sound Deadening CDL Mat - The best Vibration Damper Ever!

12-20-2009, 11:47 PM	#22
Dudewith4x4 Momma Tried. Join Date: Dec 2009 Location: Exeter Mo Posts: 319	Re: Parting out 84 Chevy 3/4 ton 4x4 would you go any cheaper? __________________ *Ross* 1980 c10 4x4 project (Sold):http://67-72chevytrucks.com/vboard/s...d.php?t=377155 1999 F-150 4x4 (DD) Saving up for a 64 17 and loving it. AlphaDamp Sound Deadening CDL Mat - The best Vibration Damper Ever!

12-21-2009, 12:06 AM	#25
Scootin 81 C20 3/4 Ton Rodder Join Date: Jan 2009 Location: Manlius, IL Posts: 1,146	Re: Parting out 84 Chevy 3/4 ton 4x4 Ok, that'll work. If it will fit in the box, I could use a new rear window latch, a indicator needle for the shifter, and the little knobs for the heater controls. __________________ 1981 Chevy Scottsdale C20 "Orange Crush": SOLD 1989 Chevy Silverado K2500: All Stock (For Now), 350 TBI/700R4. DD/Light Duty Toy. Last edited by Scootin 81 C20; 12-21-2009 at 12:19 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.