The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1969 - 1972 Blazers and Jimmys Message Board > 1969 - 1972 Blazers and Jimmys Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-09-2009, 06:42 PM   #26
turp mcspray
Registered User
 
turp mcspray's Avatar
 
Join Date: May 2007
Location: Rapid City South Dakota
Posts: 2,359
Re: New member from the Black Hills

I am going with a 454/400/205 combo. Here are some mock up pics. I wanted to keep the large truck pan so I modified the stock crossmember with a spare that I had. I went this route instead of making one from scratch with tubing so it will still look stock to the casual observer. I ended up dropping the center by two inches.
Attached Images
     
__________________
Turp Mcspray
New life for an old 2wd, farm blazer
http://67-72chevytrucks.com/vboard/s...d.php?t=505987
My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=342299
turp mcspray is offline   Reply With Quote
Old 06-09-2009, 06:55 PM   #27
turp mcspray
Registered User
 
turp mcspray's Avatar
 
Join Date: May 2007
Location: Rapid City South Dakota
Posts: 2,359
Re: New member from the Black Hills

I moved the crossmember ahead two inches. I then moved the trans/transfer case back one inch. The 400/205 adapter is one inch longer than the 350/205 adapter.So by doing it this way it put the transfer case stick in the same location as it was stock with the 350/350/205. The fan fit perfectly inside the 2wd bb shroud. Half in half out.
Attached Images
     
__________________
Turp Mcspray
New life for an old 2wd, farm blazer
http://67-72chevytrucks.com/vboard/s...d.php?t=505987
My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=342299
turp mcspray is offline   Reply With Quote
Old 06-11-2009, 07:48 PM   #28
70gmcjimmy
GMCDAC
 
70gmcjimmy's Avatar
 
Join Date: Apr 2006
Location: Rapid City, SD
Posts: 837
Re: New member from the Black Hills

Cool pics, Scott! Even tho I saw the truck in person, the crossmember pics definitely clarify what you had to go thru to use that bigger pan and to keep from messaging the firewall. Nice work!

Later---DAC
__________________
1970 GMC K5 Jimmy Custom 4X4 Mom's driver from 1971 to 2001!! Under rebuild!
1972 GMC C2500 Pickup owned since 1979 Needs a rest and refurbish!
1955 GMC 100 2nd design driven almost daily!

Rest In Peace Mom. "Dolly" 7/15/23 - 5/18/09
GMC driver for 30 years!

70gmcjimmy is offline   Reply With Quote
Old 06-11-2009, 09:00 PM   #29
turp mcspray
Registered User
 
turp mcspray's Avatar
 
Join Date: May 2007
Location: Rapid City South Dakota
Posts: 2,359
Re: New member from the Black Hills

swyfor5, here are a few shop pics.
Attached Images
     
__________________
Turp Mcspray
New life for an old 2wd, farm blazer
http://67-72chevytrucks.com/vboard/s...d.php?t=505987
My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=342299
turp mcspray is offline   Reply With Quote
Old 06-12-2009, 12:28 AM   #30
Mint68
Registered User
 
Mint68's Avatar
 
Join Date: Nov 2004
Location: Nebraska
Posts: 762
Re: New member from the Black Hills

Sorry to say, I looked at the photos and those are actually buss hooks. I happen to have a bus missing the hooks, so if you wanna just ship em out....

Sweet blazer, and its a good looking shop also.
Mint68 is offline   Reply With Quote
Old 06-13-2009, 11:07 PM   #31
FRENCHBLUE72
PROJECT 7DEUCE
 
FRENCHBLUE72's Avatar
 
Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,608
Re: New member from the Black Hills

Welcome to the board looks like ya do some pretty sweet rides..
__________________
GO BIG GREEN GO DUCKS



MEMBER #6377

72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free.

Project "7DEUCE"

check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665



Tim Powell..R.I.P EastSideLowlife..... R.I.P..
FRENCHBLUE72 is offline   Reply With Quote
Old 07-13-2009, 09:05 PM   #32
turp mcspray
Registered User
 
turp mcspray's Avatar
 
Join Date: May 2007
Location: Rapid City South Dakota
Posts: 2,359
Smile Re: New member from the Black Hills

Here's whats been happening in the last month.
I pulled the 454 out of my donor truck. It had been rebuilt but I HAD to open it up for a look. Zero ridge and very obvious hone marks. They also used a double roller chain and had it balanced as well. The guy that had it supposedly spent a buch of money on it. Maybe he did. As I suspected...flat tops. YUCK!! Those will have to go! No 8 to 1 compression for me!LOL!
I thought I was ready to pull the body off the frame but decided that the first time I get a dent in my new GM rockers, I am going to be PO d! So I built some rock sliders. Also figured I would mount my cage now as well.
Attached Images
     
__________________
Turp Mcspray
New life for an old 2wd, farm blazer
http://67-72chevytrucks.com/vboard/s...d.php?t=505987
My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=342299
turp mcspray is offline   Reply With Quote
Old 07-13-2009, 09:11 PM   #33
turp mcspray
Registered User
 
turp mcspray's Avatar
 
Join Date: May 2007
Location: Rapid City South Dakota
Posts: 2,359
Re: New member from the Black Hills

Here's a few pics with cage in blazer.
Attached Images
     
__________________
Turp Mcspray
New life for an old 2wd, farm blazer
http://67-72chevytrucks.com/vboard/s...d.php?t=505987
My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=342299
turp mcspray is offline   Reply With Quote
Old 07-13-2009, 09:16 PM   #34
turp mcspray
Registered User
 
turp mcspray's Avatar
 
Join Date: May 2007
Location: Rapid City South Dakota
Posts: 2,359
Re: New member from the Black Hills

Here's a couple with the top on.
Hopefully this weekend the body will come off the frame!
Attached Images
  
__________________
Turp Mcspray
New life for an old 2wd, farm blazer
http://67-72chevytrucks.com/vboard/s...d.php?t=505987
My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=342299
turp mcspray is offline   Reply With Quote
Old 07-13-2009, 09:48 PM   #35
swyfor5
Registered User
 
swyfor5's Avatar
 
Join Date: May 2007
Location: Marion, Mi.
Posts: 2,429
Re: New member from the Black Hills

Turp, sorry for slacking on reply's. Nice shop setup! Maybe you've seen my threads on the bumper lately, kinda taking up all my spare time here. Getting close to the end of my custom bumper journey! This is the best forum on the web for 1st gens I have ever found, great bunch of guy's here! Keep the pic's coming! I dream of setting up my barn/shop for resto work and look forward to more pic's of how some of you guy's are already "doing" it!
swyfor5 is offline   Reply With Quote
Old 07-14-2009, 05:49 AM   #36
vtblazer
Registered User
 
vtblazer's Avatar
 
Join Date: Oct 2003
Location: Central Vermont
Posts: 8,538
Re: New member from the Black Hills

Great progress report!

Will the cage be tied into the frame or bolted to the tub for the final install?

How'd you build/mount the rock sliders? Any better pics of em?
vtblazer is offline   Reply With Quote
Old 07-14-2009, 09:16 AM   #37
Yukon Jack
Post Whore
 
Yukon Jack's Avatar
 
Join Date: Feb 2000
Location: Rose Hill, KS, USA
Posts: 12,684
Re: New member from the Black Hills

Good job modifying your engine crossmember - I went that route also to get the necessary clearance. Your pics are great and one of them nicely shows the driver side firewall issue and how that can be addressed by moving the motor forward.

You're doing a great job and I will enjoy watching your project progress!
__________________
1970 Blazer with a 400 sbc and 4" lift
1980 Pontiac Trans Am, 455 Oldsmobile
2012 Kawasaki Concours 14
Yukon Jack is offline   Reply With Quote
Old 07-14-2009, 09:37 AM   #38
turp mcspray
Registered User
 
turp mcspray's Avatar
 
Join Date: May 2007
Location: Rapid City South Dakota
Posts: 2,359
Smile Re: New member from the Black Hills

Quote:
Originally Posted by vtblazer View Post
Great progress report!

Will the cage be tied into the frame or bolted to the tub for the final install?

How'd you build/mount the rock sliders? Any better pics of em?
When I had the cage in my orange blazer it was just bolted with 6"x6" plates on the bottom. After a summer of hard wheeling in the rocks with no top, my rear body body brace/u channel (below the tailgate) was bent downwards outside the framerails. Presumably from climbing rocks and putting downward pressure on the rear cage legs. When I put the top back on it would not seal towards the back of the bedsides. There was about 3/8" of daylight between the top and the bedsides! I'm not going to "wheel" it like did the other one, but plan to attach it to the frame. I will post pics of what I came up with.
I will also post some good pics of the sliders and how they are mounted as well.
__________________
Turp Mcspray
New life for an old 2wd, farm blazer
http://67-72chevytrucks.com/vboard/s...d.php?t=505987
My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=342299
turp mcspray is offline   Reply With Quote
Old 07-14-2009, 06:25 PM   #39
swyfor5
Registered User
 
swyfor5's Avatar
 
Join Date: May 2007
Location: Marion, Mi.
Posts: 2,429
Re: New member from the Black Hills

Awesome, looking forward to what you come up with here! Looking at going at these same areas on my build soon, thank's.
swyfor5 is offline   Reply With Quote
Old 07-25-2009, 04:51 PM   #40
turp mcspray
Registered User
 
turp mcspray's Avatar
 
Join Date: May 2007
Location: Rapid City South Dakota
Posts: 2,359
Re: New member from the Black Hills

Here are some pics of my "rocker savers".
I mounted it to the frame at the body mount locations thinking that would be the strongest point. The outer rear tab will mount to the outer most rocker end cap bolt. A very strong location as well. For the front tab I will weld a piece of flat stock with a nut welded to it inside of the rocker box.
Hopefully these will work for that ocassional rock or log that that I drive over against my better judgement.LOL!
Attached Images
     
__________________
Turp Mcspray
New life for an old 2wd, farm blazer
http://67-72chevytrucks.com/vboard/s...d.php?t=505987
My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=342299
turp mcspray is offline   Reply With Quote
Old 07-25-2009, 04:56 PM   #41
turp mcspray
Registered User
 
turp mcspray's Avatar
 
Join Date: May 2007
Location: Rapid City South Dakota
Posts: 2,359
Re: New member from the Black Hills

Here are a few more.
Attached Images
     
__________________
Turp Mcspray
New life for an old 2wd, farm blazer
http://67-72chevytrucks.com/vboard/s...d.php?t=505987
My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=342299
turp mcspray is offline   Reply With Quote
Old 07-25-2009, 04:59 PM   #42
turp mcspray
Registered User
 
turp mcspray's Avatar
 
Join Date: May 2007
Location: Rapid City South Dakota
Posts: 2,359
Re: New member from the Black Hills

....and a couple more.
Attached Images
   
__________________
Turp Mcspray
New life for an old 2wd, farm blazer
http://67-72chevytrucks.com/vboard/s...d.php?t=505987
My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=342299
turp mcspray is offline   Reply With Quote
Old 07-25-2009, 05:05 PM   #43
turp mcspray
Registered User
 
turp mcspray's Avatar
 
Join Date: May 2007
Location: Rapid City South Dakota
Posts: 2,359
Re: New member from the Black Hills

Here's what I got done last weekend.
Finally got the body off the frame!
Attached Images
    
__________________
Turp Mcspray
New life for an old 2wd, farm blazer
http://67-72chevytrucks.com/vboard/s...d.php?t=505987
My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=342299
turp mcspray is offline   Reply With Quote
Old 07-25-2009, 05:15 PM   #44
turp mcspray
Registered User
 
turp mcspray's Avatar
 
Join Date: May 2007
Location: Rapid City South Dakota
Posts: 2,359
Re: New member from the Black Hills

I needed something for a body cart. I forgot that I had a frame from a rusty blazer that I parted out long ago. I figured it would make an excellent body cart! I wasn't sure if it would be stable enough with the wheels so close together. Once the body was on the frame I decided to ad some pipe to to move the wheels further out for more stability. I left the front clip,doors,tailgate,top,and cage installed for easier storage while I work on the chassis. It is pretty heavy with everything still attached!
Attached Images
     
__________________
Turp Mcspray
New life for an old 2wd, farm blazer
http://67-72chevytrucks.com/vboard/s...d.php?t=505987
My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=342299
turp mcspray is offline   Reply With Quote
Old 07-25-2009, 05:20 PM   #45
turp mcspray
Registered User
 
turp mcspray's Avatar
 
Join Date: May 2007
Location: Rapid City South Dakota
Posts: 2,359
Re: New member from the Black Hills

Here are a couple of pics after I rolled it outside. My outdoor storage lot is gravel so I needed pneumatic casters to be able to roll it in there.
Next I will focus on the chassis and drivetrain.
Attached Images
  
__________________
Turp Mcspray
New life for an old 2wd, farm blazer
http://67-72chevytrucks.com/vboard/s...d.php?t=505987
My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=342299

Last edited by turp mcspray; 07-25-2009 at 05:23 PM. Reason: forgot the pics
turp mcspray is offline   Reply With Quote
Old 07-25-2009, 05:37 PM   #46
BobbyK
Registered User
 
BobbyK's Avatar
 
Join Date: May 2000
Location: Petrolia,Ontario,Canada but working in Port Huron,Mi.
Posts: 1,771
Re: New member from the Black Hills

I think you might have started a new trend with that tire /rim combo.
__________________
71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension.
Petrolia,Ontario,Canada but working in Port Huron,MI.
See ALL my Blazer pic's HERE

Last edited by BobbyK; 07-25-2009 at 05:38 PM.
BobbyK is offline   Reply With Quote
Old 07-25-2009, 07:17 PM   #47
70gmcjimmy
GMCDAC
 
70gmcjimmy's Avatar
 
Join Date: Apr 2006
Location: Rapid City, SD
Posts: 837
Re: New member from the Black Hills

Quote:
Originally Posted by BobbyK View Post
I think you might have started a new trend with that tire /rim combo.
LOL- I can see Foose havin' to cut 8, 6 and maybe even 4 inch wheels for this new trend that Turp started!

Dang Scott, you are as productive as they come, Man. Nice innovation on the cart and sliders.

Later---DAC
__________________
1970 GMC K5 Jimmy Custom 4X4 Mom's driver from 1971 to 2001!! Under rebuild!
1972 GMC C2500 Pickup owned since 1979 Needs a rest and refurbish!
1955 GMC 100 2nd design driven almost daily!

Rest In Peace Mom. "Dolly" 7/15/23 - 5/18/09
GMC driver for 30 years!

70gmcjimmy is offline   Reply With Quote
Old 07-25-2009, 07:54 PM   #48
turp mcspray
Registered User
 
turp mcspray's Avatar
 
Join Date: May 2007
Location: Rapid City South Dakota
Posts: 2,359
Smile Re: New member from the Black Hills

Here's my daily driver. As soon as my clone gets off his dead ass I want to satin black it, with a candy red over flake top. If I didn't have to sleep I could get something done!
Attached Images
  
__________________
Turp Mcspray
New life for an old 2wd, farm blazer
http://67-72chevytrucks.com/vboard/s...d.php?t=505987
My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=342299
turp mcspray is offline   Reply With Quote
Old 12-12-2009, 09:01 PM   #49
turp mcspray
Registered User
 
turp mcspray's Avatar
 
Join Date: May 2007
Location: Rapid City South Dakota
Posts: 2,359
Re: New member from the Black Hills

Finally making progress on the Blazer again. I am currently getting everything mocked up, as far as the chassis goes. I installed my springs,axles,shocks,etc. Got my 73 up gas tank and skid plate installed.
I've got the exhaust almost finished. I haven't decided where the tailpipes will exit yet.
Attached Images
     
__________________
Turp Mcspray
New life for an old 2wd, farm blazer
http://67-72chevytrucks.com/vboard/s...d.php?t=505987
My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=342299
turp mcspray is offline   Reply With Quote
Old 12-12-2009, 09:12 PM   #50
turp mcspray
Registered User
 
turp mcspray's Avatar
 
Join Date: May 2007
Location: Rapid City South Dakota
Posts: 2,359
Re: New member from the Black Hills

Finally making some progress again. Right now I am trying to get everything to do with the chassis mocked up.
I got the axles,springs,etc. installed. I have most of the exhaust figured out. I'm not sure yet where the tailpipes will exit.
Attached Images
     
__________________
Turp Mcspray
New life for an old 2wd, farm blazer
http://67-72chevytrucks.com/vboard/s...d.php?t=505987
My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=342299
turp mcspray is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:08 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com