CA Bunch of chrome, polished, dress up, upgrade engine components - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

billsbowtie · 08-18-2010, 10:50 PM

on the Polished Aluminum, ball milled, spark plug wire seperators with hardware - $45.
would you take $45.00 shipped to 24281 for them?

stealthy '69 · 08-19-2010, 12:08 AM

Can you get me a total shipped on the fan? Does it come with the other end of the wire harness? The side that plugs in to the fan. My zip is 68134.

WellBilt Kustoms · 08-19-2010, 12:18 AM

Quote:

Originally Posted by stealthy '69

Can you get me a total shipped on the fan? Does it come with the other end of the wire harness? The side that plugs in to the fan. My zip is 68134.

I'll PM you the total cost.

The plug off of the fan has two male end prongs, which accept a normal terminal connector. We usually wire them up this way, so if you ever have to pull the fan out, or radiator/fan, you can just pull the two wires out, then push them back on for re-install. Some people like to hard wire them also.

WellBilt Kustoms · 08-19-2010, 02:59 AM

I also have this B&M deep sump transmission oil pan that fits TH350 tranny, thats slightly used, but in great condition! $75

Fuel cell that we pulled out of a car to replace it with a larger one. It doesn't leak, works fine, just doesn't look pretty! - $40

novafrog · 08-19-2010, 09:20 AM

do you still have the fan,trans cooler,overflow can very interested,shipping to 25511,thanks

WellBilt Kustoms · 08-19-2010, 01:47 PM

Hey guys, all PM's replied to, and shipping quotes sent to everyone who requested them.

Thanks!

67 chevy heaven · 08-19-2010, 08:19 PM

I am interested in the starter. the wire seperators if they get to me.
Thanks

67 chevy heaven · 08-19-2010, 08:21 PM

Also the fuel pump. if it is still available. and you can get me the info. on it.
Thanks

billsbowtie · 08-19-2010, 10:23 PM

go ahead and let the next guy have the wire wire seperators .thanks bill

stealthy '69 · 08-19-2010, 11:41 PM

I'll have to pass on the fan for now. But if I get other things in line and you still have the fan I contact you. But for now I'm out.

WellBilt Kustoms · 08-20-2010, 01:33 AM

Quote:

Originally Posted by stealthy '69

I'll have to pass on the fan for now. But if I get other things in line and you still have the fan I contact you. But for now I'm out.

No Problem!

All PM's replied to.

WellBilt Kustoms · 08-20-2010, 03:31 PM

Replied to everyone's PM's

WellBilt Kustoms · 08-21-2010, 03:32 PM

Still have alot of stuff left guys. And I'm going thru my storage unit this weekend to see what other items I have that I dont need. As well as a few friends of mine, so there should be some more sweet deals coming.

WellBilt Kustoms · 08-24-2010, 09:32 PM

all PM's replied to

*ksjh1316* · 08-24-2010, 09:42 PM

If you find an air cleaner let me know

WellBilt Kustoms · 08-24-2010, 09:48 PM

Quote:

Originally Posted by ksjh1316

If you find an air cleaner let me know

I do have a chrome edelbrock 14" round air cleaner for a 4 barrel carb, comes with a K&N filter.

*ksjh1316* · 08-26-2010, 12:26 AM

If you can let me know a price and a pic I might be interested

cypressbog · 08-31-2010, 05:43 PM

Got the starter, thanks!

c10seconds · 09-06-2010, 09:07 PM

Is the deep trans pan still for sale? If so can i get a shipped price to 85204? Thanks
Posted via Mobile Device

dnd1978 · 09-06-2010, 10:31 PM

how much would shipping be on the Fuel cell to 70592?

**1971 GMC SHORTY** · 09-07-2010, 01:11 PM

Can You Update the list? would like overfill bottle Thanks

WellBilt Kustoms · 09-07-2010, 01:20 PM

Quote:

Originally Posted by c10seconds

Is the deep trans pan still for sale? If so can i get a shipped price to 85204? Thanks
Posted via Mobile Device

The B&M deep trans pan is pending sale. I'll let you know as soon as I know for sure whether or not it is definately sold.

WellBilt Kustoms · 09-07-2010, 01:21 PM

Quote:

Originally Posted by dnd1978

how much would shipping be on the Fuel cell to 70592?

The old fuel cell got picked up by someone local.

WellBilt Kustoms · 09-07-2010, 01:21 PM

Quote:

Originally Posted by 1971 GMC SHORTY

Can You Update the list? would like overfill bottle Thanks

Updated list coming later today. More stuff for sale also.

WellBilt Kustoms · 09-09-2010, 02:10 PM

Have alot of stuff left still.

Also I have a brand new, SBC, short style, polished aluminum water pump for sale. - $ 100

I have a 16" S-blade style electric fan for sale also for $45. Comes with mounting hardware.

And last I have an inner rocker panel backing plate replacement sheetmetal piece for 60-72 trucks. This is the peice that replaces the sheetmetal thats directly behind the lower rocker panel. Very common rot area. The rotted spot on my truck was small enough for me to make my own small patch panel, so I didn't use this peice at all. - $5

Soon as I pull my intake manifold off to replace it with my polished one, I will be selling mine. Its an Edelbrock Performer. Not the RPM series or anything like that, just regular performer series. Looking to get $80

08-18-2010, 10:50 PM	#26
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: Bunch of chrome, polished, dress up, upgrade engine components on the Polished Aluminum, ball milled, spark plug wire seperators with hardware - $45. would you take $45.00 shipped to 24281 for them? __________________ i have 67/72 chevy truck parts f/s.

08-19-2010, 02:59 AM	#29
WellBilt Kustoms Registered User Join Date: Jan 2010 Location: Orange County, CA Posts: 384	Re: Bunch of chrome, polished, dress up, upgrade engine components I also have this B&M deep sump transmission oil pan that fits TH350 tranny, thats slightly used, but in great condition! $75 Fuel cell that we pulled out of a car to replace it with a larger one. It doesn't leak, works fine, just doesn't look pretty! - $40

08-19-2010, 09:20 AM	#30
novafrog Registered User Join Date: Apr 2009 Location: dunlow wv Posts: 435	Re: Bunch of chrome, polished, dress up, upgrade engine components do you still have the fan,trans cooler,overflow can very interested,shipping to 25511,thanks

08-19-2010, 01:47 PM	#31
WellBilt Kustoms Registered User Join Date: Jan 2010 Location: Orange County, CA Posts: 384	Re: Bunch of chrome, polished, dress up, upgrade engine components Hey guys, all PM's replied to, and shipping quotes sent to everyone who requested them. Thanks!

08-19-2010, 08:19 PM	#32
67 chevy heaven Registered User Join Date: Jul 2009 Location: york, SC Posts: 223	Re: Bunch of chrome, polished, dress up, upgrade engine components I am interested in the starter. the wire seperators if they get to me. Thanks

08-19-2010, 08:21 PM	#33
67 chevy heaven Registered User Join Date: Jul 2009 Location: york, SC Posts: 223	Re: Bunch of chrome, polished, dress up, upgrade engine components Also the fuel pump. if it is still available. and you can get me the info. on it. Thanks

08-19-2010, 10:23 PM	#34
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: Bunch of chrome, polished, dress up, upgrade engine components go ahead and let the next guy have the wire wire seperators .thanks bill __________________ i have 67/72 chevy truck parts f/s.

08-20-2010, 03:31 PM	#37
WellBilt Kustoms Registered User Join Date: Jan 2010 Location: Orange County, CA Posts: 384	Re: Bunch of chrome, polished, dress up, upgrade engine components Replied to everyone's PM's

08-21-2010, 03:32 PM	#38
WellBilt Kustoms Registered User Join Date: Jan 2010 Location: Orange County, CA Posts: 384	Re: Bunch of chrome, polished, dress up, upgrade engine components Still have alot of stuff left guys. And I'm going thru my storage unit this weekend to see what other items I have that I dont need. As well as a few friends of mine, so there should be some more sweet deals coming.

08-24-2010, 09:32 PM	#39
WellBilt Kustoms Registered User Join Date: Jan 2010 Location: Orange County, CA Posts: 384	Re: Bunch of chrome, polished, dress up, upgrade engine components all PM's replied to

08-24-2010, 09:42 PM	#40
ksjh1316 Account Suspended Join Date: Jul 2007 Location: Wichita KS Posts: 1,599	Re: Bunch of chrome, polished, dress up, upgrade engine components If you find an air cleaner let me know

08-26-2010, 12:26 AM	#42
ksjh1316 Account Suspended Join Date: Jul 2007 Location: Wichita KS Posts: 1,599	Re: Bunch of chrome, polished, dress up, upgrade engine components If you can let me know a price and a pic I might be interested

08-31-2010, 05:43 PM	#43
cypressbog Go Pack Go! Join Date: Nov 2005 Location: Green Bay Posts: 2,669	Re: Bunch of chrome, polished, dress up, upgrade engine components Got the starter, thanks! Last edited by cypressbog; 09-03-2010 at 02:03 PM.

09-06-2010, 09:07 PM	#44
c10seconds Registered User Join Date: Oct 2009 Location: gilbert,AZ Posts: 947	Re: Bunch of chrome, polished, dress up, upgrade engine components Is the deep trans pan still for sale? If so can i get a shipped price to 85204? Thanks Posted via Mobile Device

09-06-2010, 10:31 PM	#45
dnd1978 Registered User Join Date: Jul 2008 Location: Youngsville, La Posts: 591	Re: Bunch of chrome, polished, dress up, upgrade engine components how much would shipping be on the Fuel cell to 70592?



Register or Log In To remove these advertisements.

09-07-2010, 01:11 PM	#46
1971 GMC SHORTY Senior Member Join Date: Apr 2009 Location: SAN FERNANDO VALLE SOL CAL Posts: 1,064	Re: Bunch of chrome, polished, dress up, upgrade engine components Can You Update the list? would like overfill bottle Thanks

09-09-2010, 02:10 PM	#50
WellBilt Kustoms Registered User Join Date: Jan 2010 Location: Orange County, CA Posts: 384	Re: Bunch of chrome, polished, dress up, upgrade engine components Have alot of stuff left still. Also I have a brand new, SBC, short style, polished aluminum water pump for sale. - $ 100 I have a 16" S-blade style electric fan for sale also for $45. Comes with mounting hardware. And last I have an inner rocker panel backing plate replacement sheetmetal piece for 60-72 trucks. This is the peice that replaces the sheetmetal thats directly behind the lower rocker panel. Very common rot area. The rotted spot on my truck was small enough for me to make my own small patch panel, so I didn't use this peice at all. - $5 Soon as I pull my intake manifold off to replace it with my polished one, I will be selling mine. Its an Edelbrock Performer. Not the RPM series or anything like that, just regular performer series. Looking to get $80

Register or Log In To remove these advertisements.