IA 69 or 70 BB GMC parting - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gearys 5600 · 11-01-2010, 09:43 PM

I will take the rear bumper brackets, how do you want payment?

67gmcstepside · 11-02-2010, 08:07 AM

Originally Posted by 67gmcstepside
Would you be willing to take out the pass door latch assembly?

I need the pass side door latch assembly.

sjarrett71 · 11-02-2010, 09:07 AM

Does the truck have rear leaf or coil springs? I have family going to Iowa soon that could (maybe) pick them up.

projectjimmie68 · 11-02-2010, 11:09 AM

I will pass on the fender eyebrows. Thanks

**JDL** · 11-02-2010, 10:43 PM

Quote:

Originally Posted by newbraunie

Interested in a pair of rims if 16 X 6, pending pics and condition.

There are plenty of rims $20 a piece but shipping will be big.

Quote:

Originally Posted by 67gmcstepside

Originally Posted by 67gmcstepside
Would you be willing to take out the pass door latch assembly?
I need the pass side door latch assembly.

Not much luck getting it out may have to get another one.

Quote:

Originally Posted by sjarrett71

Does the truck have rear leaf or coil springs? I have family going to Iowa soon that could (maybe) pick them up.

It has Leaf springs

Quote:

Originally Posted by novafrog

is the tail light harness any good

It is junk

Quote:

Originally Posted by gm71jimmy

What condition are the front fender eyebrows in? any close up pictures of them. If projectjimmie68 passes on them. How much shipped to Overton NV 89040 Thank you

Same price I can get you some more pics I would say they’re good for a driver. Could be rechromed.

**JDL** · 11-02-2010, 10:46 PM

Bumper brakets

gastrader35 · 11-02-2010, 10:51 PM

how much for the 4 leaf sprimg hangers off the frame.

gearys 5600 · 11-03-2010, 12:22 AM

Sent payment for bumper brackets..Thanks

Willys47 · 11-03-2010, 12:53 AM

Just so it does not get left on the frame. The tranny shifter bracket on the frame is a big block only item and should be saved as well. When doing a big block swap some one will need it to line up linkage with the tranny right.

gm71jimmy · 11-05-2010, 10:07 PM

Quote:

Originally Posted by JDL

Originally Posted by gm71jimmy
What condition are the front fender eyebrows in? any close up pictures of them. If projectjimmie68 passes on them. How much shipped to Overton NV 89040 Thank you

Same price I can get you some more pics I would say they’re good for a driver. Could be rechromed.

When you get a chance please send some close up pictures of the fender eyebrows front and back side. Thank you If they are dent and rust free i will take them. dont care about the chrome condition. PM me paypal info. Thank you Allen

mhs1954 · 11-06-2010, 01:34 AM

If the fender eyebrow are still available, shipping to 89142?
Thanks
Mike

**JDL** · 11-06-2010, 08:20 PM

This is the last from it may it be reborn as a new one.
BB shift linkeg braket $22
Sway bare $50 pluse shipping
Rad suport $90 pick up will be best.
Coustom emblem $20

**JDL** · 11-06-2010, 08:27 PM

Fender eyebrows

**JDL** · 11-06-2010, 08:32 PM

more same price in 48 states

68chevyfuelie · 11-07-2010, 09:07 AM

How rusty is the BBC shift linkage stand? Thanks.

**JDL** · 11-07-2010, 10:47 AM

just normal surface

gm71jimmy · 11-07-2010, 02:21 PM

Form the pictures of the eyebrows they look dent free. I will take them. Thank you

**JDL** · 11-07-2010, 08:55 PM

they do have some some small dents.

68chevyfuelie · 11-07-2010, 11:56 PM

Price shipped to N2H 5H1, Kitchener, Ontario? Thanks!

FriscoDave · 11-21-2010, 04:33 AM

How much do you want for the motor mount stands.

**JDL** · 11-21-2010, 09:03 AM

Quote:

Originally Posted by friscodave

how much do you want for the motor mount stands.

$100

6772GUROO · 12-10-2010, 05:45 PM

I need motor stands for a 454 in 67 sub

6772GUROO · 12-10-2010, 05:48 PM

6772GUROO;4342453]I need motor stands for a 454 in 67 sub

projectjimmie68 · 12-10-2010, 07:50 PM

How much for the sun visors shipped to zip 32136? THanks

tanman722001 · 12-10-2010, 09:46 PM

What you want for the interior light complete with screws,wiring,lens and etc. Shipped to zip 27028 Thanks

11-01-2010, 09:43 PM	#26
gearys 5600 Registered User Join Date: Mar 2010 Location: tulsa,ok Posts: 1,085	Re: 69 or 70 BB GMC parting I will take the rear bumper brackets, how do you want payment? __________________ MY BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=423629 1969 custom/10 swb--SOLD 1968 swb 50th anniv.--SOLD 1967 camaro ss/rs..LS-6-speed, 16-year long project 1956 chevy nomad 1955 chevy 210 2-dr sedan 1978 el-camino ss 1-owner

11-02-2010, 08:07 AM	#27
67gmcstepside Registered User Join Date: Jan 2010 Location: jackson Posts: 676	Re: 69 or 70 BB GMC parting Originally Posted by 67gmcstepside Would you be willing to take out the pass door latch assembly? I need the pass side door latch assembly.

11-02-2010, 09:07 AM	#28
sjarrett71 Registered User Join Date: Dec 2006 Location: Rolla, MO Posts: 2,463	Re: 69 or 70 BB GMC parting Does the truck have rear leaf or coil springs? I have family going to Iowa soon that could (maybe) pick them up. __________________ -Scott-

11-02-2010, 11:09 AM	#29
projectjimmie68 Registered User Join Date: Oct 2009 Location: Flagler Beach,Fl. Posts: 455	Re: 69 or 70 BB GMC parting I will pass on the fender eyebrows. Thanks

11-02-2010, 10:46 PM	#31
JDL Senior Member Join Date: Sep 2000 Location: Agency IA. Posts: 1,838	Re: 69 or 70 BB GMC parting Bumper brakets Attached Images __________________ 72 Chevy short step side with 454 air and tilt. 72 nova project car 63 chevy II drag car Agency Iowa

11-02-2010, 10:51 PM	#32
gastrader35 HOARDING SPECIALIST Join Date: Sep 2009 Location: SOUTH CHARLESTON OHIO Posts: 124	Re: 69 or 70 BB GMC parting how much for the 4 leaf sprimg hangers off the frame.

11-03-2010, 12:22 AM	#33
gearys 5600 Registered User Join Date: Mar 2010 Location: tulsa,ok Posts: 1,085	Re: 69 or 70 BB GMC parting Sent payment for bumper brackets..Thanks __________________ MY BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=423629 1969 custom/10 swb--SOLD 1968 swb 50th anniv.--SOLD 1967 camaro ss/rs..LS-6-speed, 16-year long project 1956 chevy nomad 1955 chevy 210 2-dr sedan 1978 el-camino ss 1-owner

11-03-2010, 12:53 AM	#34
Willys47 Registered User Join Date: Dec 2007 Location: Nanaimo B.C. Posts: 604	Re: 69 or 70 BB GMC parting Just so it does not get left on the frame. The tranny shifter bracket on the frame is a big block only item and should be saved as well. When doing a big block swap some one will need it to line up linkage with the tranny right. __________________ I was hooked on these trucks since 1982 when I drove my budys fathers 1968 Custum GMC 396 automatic dana 60 rear with a power lock diff what a ride more fun then we will we can ever tell!!

11-06-2010, 01:34 AM	#36
mhs1954 Registered User Join Date: Oct 2010 Location: Las Vegas, NV Posts: 58	Re: 69 or 70 BB GMC parting If the fender eyebrow are still available, shipping to 89142? Thanks Mike

11-06-2010, 08:20 PM	#37
JDL Senior Member Join Date: Sep 2000 Location: Agency IA. Posts: 1,838	Re: 69 or 70 BB GMC parting This is the last from it may it be reborn as a new one. BB shift linkeg braket $22 Sway bare $50 pluse shipping Rad suport $90 pick up will be best. Coustom emblem $20 Attached Images __________________ 72 Chevy short step side with 454 air and tilt. 72 nova project car 63 chevy II drag car Agency Iowa

11-06-2010, 08:27 PM	#38
JDL Senior Member Join Date: Sep 2000 Location: Agency IA. Posts: 1,838	Re: 69 or 70 BB GMC parting Fender eyebrows Attached Images __________________ 72 Chevy short step side with 454 air and tilt. 72 nova project car 63 chevy II drag car Agency Iowa

11-06-2010, 08:32 PM	#39
JDL Senior Member Join Date: Sep 2000 Location: Agency IA. Posts: 1,838	Re: 69 or 70 BB GMC parting more same price in 48 states Attached Images __________________ 72 Chevy short step side with 454 air and tilt. 72 nova project car 63 chevy II drag car Agency Iowa

11-07-2010, 09:07 AM	#40
68chevyfuelie Registered User Join Date: Mar 2008 Location: Kitchener, Ontario Posts: 487	Re: 69 or 70 BB GMC parting How rusty is the BBC shift linkage stand? Thanks.

11-07-2010, 10:47 AM	#41
JDL Senior Member Join Date: Sep 2000 Location: Agency IA. Posts: 1,838	Re: 69 or 70 BB GMC parting just normal surface __________________ 72 Chevy short step side with 454 air and tilt. 72 nova project car 63 chevy II drag car Agency Iowa

11-07-2010, 02:21 PM	#42
gm71jimmy 71 Jimmy under construction Join Date: Apr 2010 Location: Overton nv Posts: 380	Re: 69 or 70 BB GMC parting Form the pictures of the eyebrows they look dent free. I will take them. Thank you __________________ 71 cheyenne 20 lwb 2x4 (daily driver) 72 Jimmy 4x4 drivable project 72 GMC truck 3/4 4x4 lwb (parted for jimmy) 63 Nova ss project



Register or Log In To remove these advertisements.

11-07-2010, 08:55 PM	#43
JDL Senior Member Join Date: Sep 2000 Location: Agency IA. Posts: 1,838	Re: 69 or 70 BB GMC parting they do have some some small dents. Attached Images __________________ 72 Chevy short step side with 454 air and tilt. 72 nova project car 63 chevy II drag car Agency Iowa

11-07-2010, 11:56 PM	#44
68chevyfuelie Registered User Join Date: Mar 2008 Location: Kitchener, Ontario Posts: 487	Re: 69 or 70 BB GMC parting Price shipped to N2H 5H1, Kitchener, Ontario? Thanks!

11-21-2010, 04:33 AM	#45
FriscoDave Registered User Join Date: Dec 2008 Location: Frisco, CA. Posts: 68	Re: 69 or 70 BB GMC parting How much do you want for the motor mount stands.

12-10-2010, 05:45 PM	#47
6772GUROO Registered User Join Date: Dec 2010 Location: paso robles california Posts: 17	Re: 69 or 70 BB GMC parting I need motor stands for a 454 in 67 sub

12-10-2010, 05:48 PM	#48
6772GUROO Registered User Join Date: Dec 2010 Location: paso robles california Posts: 17	Re: 69 or 70 BB GMC parting 6772GUROO;4342453]I need motor stands for a 454 in 67 sub

12-10-2010, 07:50 PM	#49
projectjimmie68 Registered User Join Date: Oct 2009 Location: Flagler Beach,Fl. Posts: 455	Re: 69 or 70 BB GMC parting How much for the sun visors shipped to zip 32136? THanks

12-10-2010, 09:46 PM	#50
tanman722001 Registered User Join Date: Oct 2010 Location: Mocksville,NC Posts: 419	Re: 69 or 70 BB GMC parting What you want for the interior light complete with screws,wiring,lens and etc. Shipped to zip 27028 Thanks __________________ 1991 GMC K2500 4X4 350/auto 1991 Chevy S10 ext cab. 1990 Chevy S10 1993 Chevy S10 Blazer 4dr 4.3 Vortex/Auto

Register or Log In To remove these advertisements.