VA parting out a 70 non a/c swb stepside 72 frame. - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

billsbowtie · 06-10-2011, 12:04 AM

billsbowtie · 06-10-2011, 12:06 AM

these fenders have no rust other than some surface & i don't see any dents.

billsbowtie · 06-10-2011, 12:07 AM

i will post more pics of parts as i go threw them.

billsbowtie · 06-13-2011, 05:07 PM

Ttt

1mitch4 · 06-23-2011, 06:33 AM

I'm interested in the grille and rear window with seal shipped to 65571. Do u have pics of the grille? Thanks!

centsless · 06-23-2011, 07:26 AM

I am interested in the cab if it is still available
Posted via Mobile Device

billsbowtie · 06-23-2011, 06:27 PM

1mitch4 cab and rear window is sold. i will post a pic. of grille soon.
centsless cab is sold.

72blazer_mud_bogger · 06-23-2011, 07:23 PM

do you still have the heater engine side and cab side with hoses?

ARTISTIC · 06-23-2011, 07:54 PM

Any chance the front upper and lower control arms can be pulled and shipped to Canada?
Mine vanished..
Right now we only have Fedex or other private carriers as Canada Post is on strike.

Mike

centsless · 06-23-2011, 08:02 PM

Quote:

Originally Posted by billsbowtie

1mitch4 cab and rear window is sold. i will post a pic. of grille soon.
centsless cab is sold.

Thanks!!
Ttt

billsbowtie · 06-24-2011, 11:49 PM

1mitch4 if you are interested in the 69/70 grill i posted it in another post .

billsbowtie · 06-24-2011, 11:55 PM

mike does ups run up there ? i will take $25.00 each for the lower and $20.00 each for the upper plus shipping it will cost about $80.00. i may have some others than the ft. end i have f/s.

billsbowtie · 06-24-2011, 11:57 PM

72blazer_mud_bogger
not that 1 but i may another one i will check.

aftamathe86 · 06-25-2011, 12:14 AM

What window seals do u have,and how much shipped to 37110 thanks
Posted via Mobile Device

billsbowtie · 06-25-2011, 12:28 AM

i have some for the door glass and vent windows. if you are still interested i will look threw them and get you a price.

aftamathe86 · 06-25-2011, 12:31 AM

Sounds good, thanks
Posted via Mobile Device

ARTISTIC · 06-25-2011, 12:39 AM

Any uppers and lowers would be great lol. Im running into issues with it in the driveway on jacks...
UPS would come to the border and Canada Post would take it from there. Since CP is on strike it'll just sit at the border.
Id be willing to spend a little extra to Fedex it or just pay for it and ship when CP goes back to work. Could be soon if the gov. forces them.
Your price for parts is A-Ok for me.

thanks!

Quote:

Originally Posted by billsbowtie

mike does ups run up there ? i will take $25.00 each for the lower and $20.00 each for the upper plus shipping it will cost about $80.00. i may have some others than the ft. end i have f/s.

billsbowtie · 06-25-2011, 12:48 AM

well i am looking at some more parts that have what you need if i get them we will try to work out something. just stay in touch with me over the next few weeks. bill

kellytheaker · 06-25-2011, 08:07 AM

interested in the vent window seals - do you have the rivet kit as well and a price thanks

Leroy-B1 · 06-25-2011, 08:48 AM

interested in bumpers...you coming to Asheville for the show next week?

72blazer_mud_bogger · 06-25-2011, 11:08 AM

thank you sir

ET702 · 06-26-2011, 03:30 AM

read all the post but haven't herd if you still have your tailgate. if so i would like to by it.

1972hays · 06-26-2011, 04:13 AM

nice

billsbowtie · 06-26-2011, 04:43 PM

aftamathe86 there is 2 upper run chanel pieces part # 67-45985. 2 window felt pieces for both doors &both vent window rubber gaskets these parts cost around $100.00 in lmc book i will take $80.00 shipped to you for them.
kellytheaker if the other guy don.t take the vent window gaskets i will get you a price all i have is the rubber gaskets no rivitts.
Leroy-B1 pm sent.
ET702 i haven't looked the tailgate over good enought to price it yeti know it has 1 rust spot that i remember . i will try to look it over better in the next few days.

BigRed76 · 06-26-2011, 06:55 PM

How much for the glove box insert shipped to 80537?

06-10-2011, 12:04 AM	#26
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out a 70 non a/c swb stepside 72 frame. __________________ i have 67/72 chevy truck parts f/s.

06-10-2011, 12:06 AM	#27
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out a 70 non a/c swb stepside 72 frame. these fenders have no rust other than some surface & i don't see any dents. __________________ i have 67/72 chevy truck parts f/s.

06-10-2011, 12:07 AM	#28
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out a 70 non a/c swb stepside 72 frame. i will post more pics of parts as i go threw them. __________________ i have 67/72 chevy truck parts f/s.

06-13-2011, 05:07 PM	#29
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out a 70 non a/c swb stepside 72 frame. Ttt __________________ i have 67/72 chevy truck parts f/s.

06-23-2011, 06:33 AM	#30
1mitch4 Registered User Join Date: May 2011 Location: Summersville, MO Posts: 40	Re: parting out a 70 non a/c swb stepside 72 frame. I'm interested in the grille and rear window with seal shipped to 65571. Do u have pics of the grille? Thanks!

06-23-2011, 07:26 AM	#31
centsless sufficiently talented fool Join Date: Jun 2006 Location: Forest Hill, MD Posts: 2,231	Re: parting out a 70 non a/c swb stepside 72 frame. I am interested in the cab if it is still available Posted via Mobile Device __________________ "it's impossible to be surrounded by idiots when you are part of the circle" 2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board

06-23-2011, 06:27 PM	#32
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out a 70 non a/c swb stepside 72 frame. 1mitch4 cab and rear window is sold. i will post a pic. of grille soon. centsless cab is sold. __________________ i have 67/72 chevy truck parts f/s.

06-23-2011, 07:23 PM	#33
72blazer_mud_bogger Registered User Join Date: Mar 2008 Location: St Louis, MO Posts: 533	Re: parting out a 70 non a/c swb stepside 72 frame. do you still have the heater engine side and cab side with hoses?

06-23-2011, 07:54 PM	#34
ARTISTIC Registered User Join Date: Aug 2004 Location: Yukon Territories Posts: 58	Re: parting out a 70 non a/c swb stepside 72 frame. Any chance the front upper and lower control arms can be pulled and shipped to Canada? Mine vanished.. Right now we only have Fedex or other private carriers as Canada Post is on strike. Mike

06-24-2011, 11:49 PM	#36
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out a 70 non a/c swb stepside 72 frame. 1mitch4 if you are interested in the 69/70 grill i posted it in another post . __________________ i have 67/72 chevy truck parts f/s.

06-24-2011, 11:55 PM	#37
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out a 70 non a/c swb stepside 72 frame. mike does ups run up there ? i will take $25.00 each for the lower and $20.00 each for the upper plus shipping it will cost about $80.00. i may have some others than the ft. end i have f/s. __________________ i have 67/72 chevy truck parts f/s.

06-24-2011, 11:57 PM	#38
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out a 70 non a/c swb stepside 72 frame. 72blazer_mud_bogger not that 1 but i may another one i will check. __________________ i have 67/72 chevy truck parts f/s.

06-25-2011, 12:14 AM	#39
aftamathe86 Registered User Join Date: Feb 2010 Location: mcminnville,tn Posts: 153	Re: parting out a 70 non a/c swb stepside 72 frame. What window seals do u have,and how much shipped to 37110 thanks Posted via Mobile Device

06-25-2011, 12:28 AM	#40
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out a 70 non a/c swb stepside 72 frame. i have some for the door glass and vent windows. if you are still interested i will look threw them and get you a price. __________________ i have 67/72 chevy truck parts f/s.

06-25-2011, 12:31 AM	#41
aftamathe86 Registered User Join Date: Feb 2010 Location: mcminnville,tn Posts: 153	Re: parting out a 70 non a/c swb stepside 72 frame. Sounds good, thanks Posted via Mobile Device



Register or Log In To remove these advertisements.

06-25-2011, 12:48 AM	#43
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out a 70 non a/c swb stepside 72 frame. well i am looking at some more parts that have what you need if i get them we will try to work out something. just stay in touch with me over the next few weeks. bill __________________ i have 67/72 chevy truck parts f/s.

06-25-2011, 08:07 AM	#44
kellytheaker Registered User Join Date: Dec 2009 Location: ontario Canada Posts: 412	Re: parting out a 70 non a/c swb stepside 72 frame. interested in the vent window seals - do you have the rivet kit as well and a price thanks

06-25-2011, 08:48 AM	#45
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,994	Re: parting out a 70 non a/c swb stepside 72 frame. interested in bumpers...you coming to Asheville for the show next week?

06-25-2011, 11:08 AM	#46
72blazer_mud_bogger Registered User Join Date: Mar 2008 Location: St Louis, MO Posts: 533	Re: parting out a 70 non a/c swb stepside 72 frame. thank you sir

06-26-2011, 03:30 AM	#47
ET702 Registered User Join Date: Sep 2010 Location: las vegas, nv Posts: 67	Re: parting out a 70 non a/c swb stepside 72 frame. read all the post but haven't herd if you still have your tailgate. if so i would like to by it.

06-26-2011, 04:13 AM	#48
1972hays Registered User Join Date: Feb 2011 Location: A****er ca Posts: 475	Re: parting out a 70 non a/c swb stepside 72 frame. nice __________________ 72 chevrolet 4wd 350/350 swb fleet green mean army machine

06-26-2011, 04:43 PM	#49
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out a 70 non a/c swb stepside 72 frame. aftamathe86 there is 2 upper run chanel pieces part # 67-45985. 2 window felt pieces for both doors &both vent window rubber gaskets these parts cost around $100.00 in lmc book i will take $80.00 shipped to you for them. kellytheaker if the other guy don.t take the vent window gaskets i will get you a price all i have is the rubber gaskets no rivitts. Leroy-B1 pm sent. ET702 i haven't looked the tailgate over good enought to price it yeti know it has 1 rust spot that i remember . i will try to look it over better in the next few days. __________________ i have 67/72 chevy truck parts f/s.

06-26-2011, 06:55 PM	#50
BigRed76 Registered User Join Date: Jan 2010 Location: Loveland, CO Posts: 1,921	Re: parting out a 70 non a/c swb stepside 72 frame. How much for the glove box insert shipped to 80537? __________________ Zach 1970 Chevrolet Custom Camper K20 1971 GMC Super K2500, 12V/NV4500 swap in progress 1971 Chevrolet Custom C10 1972 Chevrolet Custom Deluxe C20, 5.3/4L60E 1972 Oldsmobile Cutlass Supreme, 455/TH400, 3.73 posi 2004 GMC Sierra 2500HD, LB7/Allison, CCSB 2005 GMC Sierra 1500, 5.3/4L60E, CCSB

Register or Log In To remove these advertisements.