hotrod-c10 - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mightymouse · 07-20-2011, 07:30 PM

Quote:

Originally Posted by butternut1972

Nice project you have. I'll be keepin' an eye on this one. Keep up the nice work.

thanks, butternut1972. if mine turns out 1/2 as nice as the picture in your avatar i'll be happy

mightymouse · 07-20-2011, 08:05 PM

Quote:

Originally Posted by 6772owner

I agree with you on the heat, i've been slacking on some outdoor stuff for the same reason, just keep plugging away at it and you'll get done eventually. The progress looks good, hope the "new" cab is easier on you.

thanks , i hope it works out . if i had your welding skills i wouldive been ok on the red cab. btw your project is looking good. hopefully it'll cool off a little...johnny

Quote:

Originally Posted by dougminton

subscribed cuz I like pro-street.

thanks' dougminton for checkin my build or my want to build.i like pro-street look too! those wheels you built are very impressive. keep it up i'll watching..johnny

6772owner · 07-20-2011, 09:27 PM

Mightymouse, well thank you but Im not the welder, my brother does all my welding duties, I wish I could weld that well too. I hope it does cool off a little, it is still 80* here at 7:30pm....

*low&slow* · 07-22-2011, 04:59 AM

Well I'll be darned. I've looked at this build about 5 times in the last 2 days and I can't believe I haven't subscribed yet. I'm totally in on this build

That chassis is exactly the way I want to do mine.

How much is it narrowed in the back and what's the specs to the rest?

**67cheby** · 07-22-2011, 01:19 PM

Looking good....keep it up !!

mightymouse · 07-22-2011, 07:24 PM

Quote:

Originally Posted by low&slow

Well I'll be darned. I've looked at this build about 5 times in the last 2 days and I can't believe I haven't subscribed yet. I'm totally in on this build

That chassis is exactly the way I want to do mine.

How much is it narrowed in the back and what's the specs to the rest?

hey there low&slow thanks for the nice comments . my rear housing is a chris alston fab-9 chromemolly ' thats 46-1/8 wide from flange to flange with back-brace with 35 spline moser axles that are gun-drilled and star flanges& 5/8 studs' strange center section with full spool and 430 gears ' aluminum pinion support and moser yoke/afco double adjustable shocks .chassis eng. ladder bars ...thanks for looking..johnny

mightymouse · 07-22-2011, 07:35 PM

Quote:

Originally Posted by 67cheby

Looking good....keep it up !!

thanks' 67cheby im trying to keep it going . but i seem to be stuck ' and caint get over the hump ' and when i see trucks like yours . makes me wanna call pick-pull to come get my junk. and start over.....ha .johnny

**67cheby** · 07-22-2011, 08:34 PM

Quote:

Originally Posted by mightymouse

thanks' 67cheby im trying to keep it going . but i seem to be stuck ' and caint get over the hump ' and when i see trucks like yours . makes me wanna call pick-pull to come get my junk. and start over.....ha .johnny

you have got to read my backstory....8 years building now...i have hit ALOT of humps, i step back, cool off ...build up a good head of steam and take off again...ONE DAY, if SLOSH TUBZ take off like i think it shouldnt be more than one year away !!! and Thank you !!

mightymouse · 07-28-2011, 10:01 PM

well brought home the cab that i bought from greg, in waco tuesday. yesterday i removed the gas tank . today the high-hump after work. gonna try to get it stripped this weekend. not to bad but really needs rockers and cab corners. going to try to sell some of the parts like tank' hump' etc. to help keep fund project . small steps-keep-on truckin..johnny

**67cheby** · 07-29-2011, 09:22 AM

Nice cab !!

mightymouse · 07-30-2011, 08:44 PM

well i got the cab stripped today ...now wait on the lotto tonight..haha

mightymouse · 08-16-2011, 08:57 PM

well I'm in reverse going backwards. no progress . I've decided to pull motor+trans so i could move it back to the next mounting holes. ..sp690 ( Sergio) a board member my friend from a cross the street brought his crane over and helped me out thanks..Sergio. the reason to move it back was cause i only had about 3 1/4 " between radiator and water-pump pulley.i also haven't installed my hard brake lines yet. so i ordered them this morning.expect them early next week .I'll get them in first this time before motor go's back in. well i'm sure i bored y'all enough for now here's a couple pics..jw

mightymouse · 08-16-2011, 09:02 PM

not enough room for shroud and electric fan .

JRBECK64 · 08-16-2011, 09:12 PM

Great Build. Nice Cab. Look forward to following your build and good luck with the loto.

JRBECK64

butternut1972 · 08-16-2011, 10:21 PM

Looking good. Thats nice solid looking cab. Don't keep us waiting to long for more pics.
Posted via Mobile Device

Painter D · 08-16-2011, 10:29 PM

Nice build

litew8 · 08-17-2011, 01:28 AM

Quote:

Originally Posted by mightymouse

well i got the cab stripped today ...now wait on the lotto tonight..haha

Quote:

Originally Posted by mightymouse

not enough room for shroud and electric fan .

No options?

mightymouse · 08-20-2011, 10:20 PM

Quote:

Originally Posted by JRBECK64

Great Build. Nice Cab. Look forward to following your build and good luck with the loto.

JRBECK64

Quote:

Originally Posted by butternut1972

Looking good. Thats nice solid looking cab. Don't keep us waiting to long for more pics.
Posted via Mobile Device

Quote:

Originally Posted by 69chevyshort

Nice build

thanks .guys. trying to make some progress today . got my inner +outter tie rods mounted today. and my brake lines came in today . just got them sittin in place . try to get-em mounted tomorrow.

mightymouse · 08-20-2011, 10:22 PM

few pics

mightymouse · 08-25-2011, 07:44 PM

well not much to write about. but got the brake lines mounted to frame . still need rear brakes . some progress is good.

mightymouse · 08-25-2011, 07:46 PM

i forget ever time sorry..jw

6772owner · 08-26-2011, 01:00 PM

Looking good!

72SWBChevy · 08-26-2011, 01:38 PM

Nice work, good find on the cab!

tattoed71 · 08-26-2011, 01:55 PM

love the meats goodluck with the build

mightymouse · 08-28-2011, 06:57 PM

thanks guys . hopefully i'll get some progress soon. seems like i'm just spinning my wheels...jw

07-20-2011, 09:27 PM	#28
6772owner Gearhead Join Date: Jan 2008 Location: Colorado Posts: 1,193	Re: hotrod-c10 Mightymouse, well thank you but Im not the welder, my brother does all my welding duties, I wish I could weld that well too. I hope it does cool off a little, it is still 80* here at 7:30pm.... __________________ 2002 Saturn SL2, My D/D 2019 Ford Fusion SE, Ecoboost - Wife's D/D 1993 Camaro Z28, A4, CAI, Cat-Back Exhaust Project C10 (my 72' C10 w/96' LT1, 700R4, bagged F&R, 18's (for now), Short/Fleet) -- SOLD! Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=313644

07-22-2011, 04:59 AM	#29
low&slow Account Suspended Join Date: Jan 2009 Location: Kuna, Idaho Posts: 1,046	Re: hotrod-c10 Well I'll be darned. I've looked at this build about 5 times in the last 2 days and I can't believe I haven't subscribed yet. I'm totally in on this build That chassis is exactly the way I want to do mine. How much is it narrowed in the back and what's the specs to the rest?

07-22-2011, 01:19 PM	#30
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: hotrod-c10 Looking good....keep it up !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

07-28-2011, 10:01 PM	#34
mightymouse Registered User Join Date: Feb 2011 Location: Crowley TX Posts: 979	Re: hotrod-c10 well brought home the cab that i bought from greg, in waco tuesday. yesterday i removed the gas tank . today the high-hump after work. gonna try to get it stripped this weekend. not to bad but really needs rockers and cab corners. going to try to sell some of the parts like tank' hump' etc. to help keep fund project . small steps-keep-on truckin..johnny Attached Images

07-29-2011, 09:22 AM	#35
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: hotrod-c10 Nice cab !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

07-30-2011, 08:44 PM	#36
mightymouse Registered User Join Date: Feb 2011 Location: Crowley TX Posts: 979	Re: hotrod-c10 well i got the cab stripped today ...now wait on the lotto tonight..haha Attached Images

08-16-2011, 08:57 PM	#37
mightymouse Registered User Join Date: Feb 2011 Location: Crowley TX Posts: 979	Re: hotrod-c10 well I'm in reverse going backwards. no progress . I've decided to pull motor+trans so i could move it back to the next mounting holes. ..sp690 ( Sergio) a board member my friend from a cross the street brought his crane over and helped me out thanks..Sergio. the reason to move it back was cause i only had about 3 1/4 " between radiator and water-pump pulley.i also haven't installed my hard brake lines yet. so i ordered them this morning.expect them early next week .I'll get them in first this time before motor go's back in. well i'm sure i bored y'all enough for now here's a couple pics..jw Attached Images

08-16-2011, 09:02 PM	#38
mightymouse Registered User Join Date: Feb 2011 Location: Crowley TX Posts: 979	Re: hotrod-c10 not enough room for shroud and electric fan . Attached Images

08-16-2011, 09:12 PM	#39
JRBECK64 Registered User Join Date: Sep 2008 Location: Cornelius Oregon Posts: 1,073	Re: hotrod-c10 Great Build. Nice Cab. Look forward to following your build and good luck with the loto. JRBECK64

08-16-2011, 10:21 PM	#40
butternut1972 Registered User Join Date: May 2009 Location: longview,wa Posts: 1,094	Re: hotrod-c10 Looking good. Thats nice solid looking cab. Don't keep us waiting to long for more pics. Posted via Mobile Device __________________ 1972 GMC (PROJECT LONG OVERDUE) 1998 SWB 4WD

08-16-2011, 10:29 PM	#41
Painter D Registered User Join Date: Jun 2007 Location: DFW (Forney) Posts: 1,529	Re: hotrod-c10 Nice build __________________ '58 SWB Fleetside...Front & Rear Porterbuilt Dropmember, 6.0 LS /4L60E. Accuair E-level, 20 Billet Specialties (Vintecs) '63 Buick Riviera ... AccuAir E-level, 20" Billet Specialties (Vintecs) http://67-72chevytrucks.com/vboard/s...=528853&page=5

08-20-2011, 10:22 PM	#44
mightymouse Registered User Join Date: Feb 2011 Location: Crowley TX Posts: 979	Re: hotrod-c10 few pics Attached Images

08-25-2011, 07:44 PM	#45
mightymouse Registered User Join Date: Feb 2011 Location: Crowley TX Posts: 979	Re: hotrod-c10 well not much to write about. but got the brake lines mounted to frame . still need rear brakes . some progress is good.

08-25-2011, 07:46 PM	#46
mightymouse Registered User Join Date: Feb 2011 Location: Crowley TX Posts: 979	Re: hotrod-c10 i forget ever time sorry..jw Attached Images

08-26-2011, 01:00 PM	#47
6772owner Gearhead Join Date: Jan 2008 Location: Colorado Posts: 1,193	Re: hotrod-c10 Looking good! __________________ 2002 Saturn SL2, My D/D 2019 Ford Fusion SE, Ecoboost - Wife's D/D 1993 Camaro Z28, A4, CAI, Cat-Back Exhaust Project C10 (my 72' C10 w/96' LT1, 700R4, bagged F&R, 18's (for now), Short/Fleet) -- SOLD! Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=313644



Register or Log In To remove these advertisements.

08-26-2011, 01:38 PM	#48
72SWBChevy Registered User Join Date: Jun 2004 Location: Houston Tx Posts: 753	Re: hotrod-c10 Nice work, good find on the cab! __________________ 1977 Camaro 468 BBC - SOLD - 1972 Chevy SWB....in the works!! 2006 Crew Cab Dmax/Allison Summit White-SOLD- 2009 Toyota Tacoma V6 Pre Runner - daily driver - my build thread -http://67-72chevytrucks.com/vboard/s...95#post4774595

08-26-2011, 01:55 PM	#49
tattoed71 Registered User Join Date: Jul 2011 Location: abilene,Texas Posts: 149	Re: hotrod-c10 love the meats goodluck with the build

08-28-2011, 06:57 PM	#50
mightymouse Registered User Join Date: Feb 2011 Location: Crowley TX Posts: 979	Re: hotrod-c10 thanks guys . hopefully i'll get some progress soon. seems like i'm just spinning my wheels...jw

Register or Log In To remove these advertisements.