KS Parting 72 GMC Sierra 3/4 ton BB

[Critterman71]

mine is all of that but is a chevy it also has A/C but dont think that matters for what I need but not sure

[Cash3481]

Originally Posted by Critterman71

mine is all of that but is a chevy it also has A/C but dont think that matters for what I need but not sure

I have the chevy headlight harness from another truck. I think we are good. How about $50 for both plus shipping. They should fit in a large FRB for $15.
I guess that's $65 shipped if my math is right.
Mike
Posted via Mobile Device

[DeadheadNM]

Thanks for taking the wiring pics but don't see what I'm after so will pass, Pete

[70K10Hunter]

how you doing on the bed patch panels? have you got that far yet??
thanks

[Cash3481]

All, sorry but I was voluntold that we are camping this weekend with the kids before they go off to college so I'm on the iPhone untill Sunday afternoon. I'll catch up this thread and the other thread Sunday night.
Mike
Posted via Mobile Device

[Cash3481]

Originally Posted by 70' 396 Stepside

Now thats a big item. I assume you meant everything bolted to the motor correct. all brackets and compressor for $175 plus shipping. I have the harness if you need it to just LMK and we can work a deal on it all or add more to this deal.

PM sent...

70'396:
Are you still on for meeting my wife wednesday per our phone call?

Originally Posted by cwilkie

Interested in the vacuum port pending pictures.
Posted via Mobile Device

I sent pp invoice but still have no payment just checking in to see if your still interested. Lmk by tomorrow please.

Originally Posted by 71blksuper4x4

Intetested in the gmc fenders and price on the bedside steps. Trevor
Posted via Mobile Device

Trevor:
I priced the bed steps to you at $50. If your interested please respond by tomorrow as others are interested, thank you.

Originally Posted by WIDESIDE72

Any photos of the oil pressure line and fitting? Do you happen to have a 68-71 bb accelerator rod and hardware?
Posted via Mobile Device

Posted pics of oil line. If you need to see more please lmk. The ends are good and the union is fine as well. It's removed now and ready to ship.

Originally Posted by longhorn70gmc

Hello CASH3481,

I am interested in the bed steps pending price, can I get in line behind Trevor? Looking at these steps from underneath, is there a braket of some kind to anchor the step to keep the sheet metal from bending? I have never seen one of these up close befor.
R/

Your still next, since I was out of town this weekend I'll give Trevor another day to decide.

Originally Posted by bigblocksean

Interested in the bench seat, if it's full foam. Thanks
Posted via Mobile Device

Originally Posted by Cash3481

I have the chevy headlight harness from another truck. I think we are good. How about $50 for both plus shipping. They should fit in a large FRB for $15.
I guess that's $65 shipped if my math is right.
Mike
Posted via Mobile Device

Big block Sean:
Pm sent!

Originally Posted by 70K10Hunter

how you doing on the bed patch panels? have you got that far yet??
thanks

70k10hunter:
Haven't forgot you! I will be finished with the front end tomorrow and then I'll have the pics of the bed for you.
Mike
Posted via Mobile Device

[70' 396 Stepside]

Are you still on for meeting my wife wednesday per our phone call?


Mike,

Yeah, but we should probably talk a bit more about the PS pump stuff...I am available in the morning after 9AM.

Steve

[Cash3481]

Originally Posted by 70' 396 Stepside

Are you still on for meeting my wife wednesday per our phone call?


Mike,

Yeah, but we should probably talk a bit more about the PS pump stuff...I am available in the morning after 9AM.

Steve

Steve, I'll call you around 9am then. Have a good night!
Mike
Posted via Mobile Device

[Critterman71]

OK on the harness and the clams were are we at for a total and how do you want paid.

[Cash3481]

Originally Posted by Critterman71

OK on the harness and the clams were are we at for a total and how do you want paid.

I believe you also wanted the heat shield if still there. engine harness, oil pressure line.

I will remove the front harness tonight ($25) and get it inspected and pics taken for you. Heat shield ($25). It should all fit in a large FRB. Did you still need the Engine harness for ($25) still.

PM Sent on payment If that all works for you.

[70K10Hunter]

thanks waiting in the wings.

[71blksuper4x4]

Hey Mike, thanks for getting back with me. I am going to pass on the steps. I am working on getting my seat belts restored. Thanks for your time. Trevor

[Cash3481]

Originally Posted by longhorn70gmc

Hello CASH3481,

I am interested in the bed steps pending price, can I get in line behind Trevor? Looking at these steps from underneath, is there a braket of some kind to anchor the step to keep the sheet metal from bending? I have never seen one of these up close befor.
R/

Longhorn70GMC:
sir you are up on the steps if your still interested, Trevor passed. Please lmk when you have a chance. $50 I can get you mor pics of them removed or installed if you need it.
Mike
Posted via Mobile Device

[cadtorque]

PM sent on the gas pedal assy, throttle cable, and 400 emblems.

[Cash3481]

Originally Posted by cadtorque

PM sent on the gas pedal assy, throttle cable, and 400 emblems.

PM Answered, pics today after work.

[Cash3481]

Originally Posted by cadtorque

PM sent on the gas pedal assy, throttle cable, and 400 emblems.

cadtorque:
Here are the pics of the throttle cable with clip, pedal w/hardware, 400 emblems and the carb return spring and bracket.

Mike

[Cash3481]

If anyone wanted pics of the custom 20 emblems here they are for $25 shipped.

[Critterman71]

what heat shield are we talking about? I have gotten side tracked a little and need to figure about what I need to pay you for. I need the clams, wire harness from the fuse block (firewall side forward) for sure. I know there is no air cleaner and stove set up available so no big deal on that. got the PM on payment no problem there. I do not need the oil pressure line as I found mine. so I guess I need these for sure

1. clams with blots to bolt them to block
2. engine harness from firewall plug forward

[Cash3481]

Originally Posted by Critterman71

what heat shield are we talking about? I have gotten side tracked a little and need to figure about what I need to pay you for. I need the clams, wire harness from the fuse block (firewall side forward) for sure. I know there is no air cleaner and stove set up available so no big deal on that. got the PM on payment no problem there. I do not need the oil pressure line as I found mine. so I guess I need these for sure

1. clams with blots to bolt them to block
2. engine harness from firewall plug forward

Ill post the harness pics this afternoon for you to confim you want them and so I can inspect and show pics if there are issues.
I am loading pics of the clams and stands today as a package deal so I dont want to split them up as of now. You stated you didnt need to oil line already so I guess your waiting on the harmess pics today.
I have two or three harnesses for the front lights. Ill post pics later.
THe heat shield question goes back to your original post and Im keeping that heatshield for the D/S manifold for my truck.
Hope I clarified it all, sorry for the book!
Mike

[Critterman71]

how much do you want for the mounts and clams? I passed a set up twice because I was under the impression that you were going to sell me just the clams. so I guess O need just the harness from the fuse block (firewall side) forward. I can put my motor in until I get a set a clams!

[Cash3481]

Originally Posted by Critterman71

how much do you want for the mounts and clams? I passed a set up twice because I was under the impression that you were going to sell me just the clams. so I guess O need just the harness from the fuse block (firewall side) forward. I can put my motor in until I get a set a clams!

Sure make me feel bad. Lol I'll sell you the clams for $50 then but somebody on here needs these stands for $125 shipped. I'm taking the harness out in a few.
Mike
Posted via Mobile Device

[Critterman71]

I will be fair on the clams as I know it may be hard to sell just the stands although I bought just the stands not knowing I needed clams (my bad there)post the set up and see if any body wants just the stands and if so I will take the clams for the 50.00. I will watch for harness pics.

[Cash3481]

Originally Posted by 70K10Hunter

I am looking for some bed patch panels. Is this or the other truck have a steel floor? and if so anything worth salvaging? I would need 24"X24" front pass corner and both rear corners 12"X12"

70K10Hunter:
I'm measuring and cutting the front p/s now and I'll post after I get them out.
Mike
Posted via Mobile Device

[Cash3481]

Originally Posted by Critterman71

I will be fair on the clams as I know it may be hard to sell just the stands although I bought just the stands not knowing I needed clams (my bad there)post the set up and see if any body wants just the stands and if so I will take the clams for the 50.00. I will watch for harness pics.

Critterman,
Here is the pics of the harness I inspected it and there is two splices by the power wire and someone tried to T-tap the power wire by the fuse block (see pics). I didnt notice the T-Taps untill I removed the harness. It could be covered with tape and should be fine but its your decision. LMK.

Ill post the stands tomorrow for sale seperately (in this thread) if they dont go fast Ill keep my word with you on Tuesday. That gives you a day to think about the harness too.
Thanks for the patients as I am trying to cut this truck apart and get the BB exhaust hangers off it has taken almost all day.

Mike

[Cash3481]

Originally Posted by Cash3481

70K10Hunter:
I'm measuring and cutting the front p/s now and I'll post after I get them out.
Mike
Posted via Mobile Device

70KHunter,
I tried for ever to get those patch panels out for you... Its just not worth the time and energy without a plasma cutter. I ruined more than I removed. Im sorry but if you wanted the bed to cut up it would be yours for free if you could get it. I know its a long way away from you and I appologize but I need this truck gone as I have another waiting to get parted.

Mike