67 SWB Custom "Jane" Piece by Piece project - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fastcam1 · 02-21-2013, 06:29 PM

Name: image.jpg
Views: 797
Size: 50.5 KB

Posted via Mobile Device

fastcam1 · 02-21-2013, 06:30 PM

Name: image.jpg
Views: 778
Size: 49.2 KB

Posted via Mobile Device

fastcam1 · 02-21-2013, 06:32 PM

Name: image.jpg
Views: 776
Size: 48.7 KB

Posted via Mobile Device

**lolife99** · 02-21-2013, 06:47 PM

Quote:

Originally Posted by fastcam1

So just a couple small updates, I've got the front suspension installed minus front sway bar and power steering box. I installed the motor and also the old Th400 so the rear of the motor has support. Last I installed the rear differential to check clearance which I'm glad I did because my ECE track bar actually hits the frame before full dump so ill have to go with one that mounts on the side of the trailling arm rather than above it.
Attachment 1064338
Posted via Mobile Device

Or you can use a lowering block between the ECE mount and the rearend housing,...

fastcam1 · 02-21-2013, 07:02 PM

Ya I have 2"blocks and the angle of the bar it still hits ill have to get a pic of it later
Posted via Mobile Device

shawno72 · 02-21-2013, 07:43 PM

Pics look great man!!

fastcam1 · 02-21-2013, 08:23 PM

Thanks Shawn its not much but a little bit is better than nothing I guess

Posted via Mobile Device

fastcam1 · 02-21-2013, 11:14 PM

Quote:

Originally Posted by lolife99

Or you can use a lowering block between the ECE mount and the rearend housing,...

You can kinda see in this picture
Name: image.jpg
Views: 753
Size: 32.0 KB

Posted via Mobile Device

**lolife99** · 02-21-2013, 11:59 PM

Pumpkin will hit the bed floor before you get that far.
Put a snubber in there and go.
Posted via Mobile Device

fastcam1 · 02-22-2013, 12:44 AM

Quote:

Originally Posted by lolife99

Pumpkin will hit the bed floor before you get that far.
Put a snubber in there and go.
Posted via Mobile Device

I'm already raising the floor 4" to make room for a few things, the pumpkin being one of them
Posted via Mobile Device

kac383 · 03-02-2013, 01:20 PM

Looking Like a great build, keep up the work.

fastcam1 · 03-02-2013, 01:50 PM

Quote:

Originally Posted by kac383

Looking Like a great build, keep up the work.

Thanks! Do you have a build of your own?
Posted via Mobile Device

kac383 · 03-02-2013, 07:08 PM

Hello Fastcam, ya I have 69 longbed that I am building.

It is a slow project as I am building it as I get money, however income tax check arrived last week so that has gave it a boost for a while.

I haven't started a buildthread on here yet, I want to get alittle farther on it.

Kevin

Fatkid1983 · 03-05-2013, 09:08 AM

Looking good man! Its going to be damn nice when its done!
Posted via Mobile Device

fastcam1 · 03-05-2013, 10:43 AM

Quote:

Originally Posted by Fatkid1983

Looking good man! Its going to be damn nice when its done!
Posted via Mobile Device

Ya one day lol I need to start putting some serious time into it
Posted via Mobile Device

Fatkid1983 · 03-05-2013, 10:46 AM

Just take your time and the end result will be worth it!
Posted via Mobile Device

fastcam1 · 03-05-2013, 10:48 AM

Ya I here you but I just get all antsy being around everyone else's truck like the meet last week, makes me just want to slap it together and go!
Posted via Mobile Device

Fatkid1983 · 03-05-2013, 10:49 AM

But think if you go as you are youll have the nicest one at the meets
Posted via Mobile Device

fastcam1 · 03-05-2013, 10:59 AM

As long as I can keep Chris from starting on his dropmember truck you might be right
Posted via Mobile Device

Fatkid1983 · 03-05-2013, 11:00 AM

Lol. When is he starting that one?
Posted via Mobile Device

fastcam1 · 03-05-2013, 11:09 AM

Who knows he's always to busy buying parts and parts trucks. Plus I stole the frame that he had already started with
Posted via Mobile Device

fastcam1 · 03-05-2013, 11:12 AM

Quote:

Originally Posted by kac383

Hello Fastcam, ya I have 69 longbed that I am building.

It is a slow project as I am building it as I get money, however income tax check arrived last week so that has gave it a boost for a while.

I haven't started a buildthread on here yet, I want to get alittle farther on it.

Kevin

Sounds like it should start movin right along with the tax boost, if you haven't already you should check out the northwest c10's Facebook page
Posted via Mobile Device

67ctener · 03-05-2013, 12:24 PM

Lookin good, I wish my bumper was that low to the ground
Posted via Mobile Device

fastcam1 · 03-05-2013, 12:33 PM

Quote:

Originally Posted by 67ctener

Lookin good, I wish my bumper was that low to the ground
Posted via Mobile Device

Thanks I just can't wait to see some sheet metal behind the bumper

Posted via Mobile Device

Fatkid1983 · 03-05-2013, 05:59 PM

hey i was going to tell ya if you need any help working on that thing let me know! im in yelm so im close and always looking for something to do lol

02-21-2013, 06:29 PM	#26
fastcam1 Young gun Join Date: Feb 2009 Location: Spanaway WA Posts: 631	Re: 67 SWB Custom "Jane" Piece by Piece project Posted via Mobile Device __________________ 67 SWB Custom "JANE" http://67-72chevytrucks.com/vboard/s...d.php?t=554024 Northwest C10's http://www.facebook.com/#!/groups/Norhtwestc10s/ Cameron sparks

02-21-2013, 06:30 PM	#27
fastcam1 Young gun Join Date: Feb 2009 Location: Spanaway WA Posts: 631	Re: 67 SWB Custom "Jane" Piece by Piece project Posted via Mobile Device __________________ 67 SWB Custom "JANE" http://67-72chevytrucks.com/vboard/s...d.php?t=554024 Northwest C10's http://www.facebook.com/#!/groups/Norhtwestc10s/ Cameron sparks

02-21-2013, 06:32 PM	#28
fastcam1 Young gun Join Date: Feb 2009 Location: Spanaway WA Posts: 631	Re: 67 SWB Custom "Jane" Piece by Piece project Posted via Mobile Device __________________ 67 SWB Custom "JANE" http://67-72chevytrucks.com/vboard/s...d.php?t=554024 Northwest C10's http://www.facebook.com/#!/groups/Norhtwestc10s/ Cameron sparks

02-21-2013, 07:02 PM	#30
fastcam1 Young gun Join Date: Feb 2009 Location: Spanaway WA Posts: 631	Re: 67 SWB Custom "Jane" Piece by Piece project Ya I have 2"blocks and the angle of the bar it still hits ill have to get a pic of it later Posted via Mobile Device __________________ 67 SWB Custom "JANE" http://67-72chevytrucks.com/vboard/s...d.php?t=554024 Northwest C10's http://www.facebook.com/#!/groups/Norhtwestc10s/ Cameron sparks

02-21-2013, 07:43 PM	#31
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: 67 SWB Custom "Jane" Piece by Piece project Pics look great man!! __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

02-21-2013, 08:23 PM	#32
fastcam1 Young gun Join Date: Feb 2009 Location: Spanaway WA Posts: 631	Re: 67 SWB Custom "Jane" Piece by Piece project Thanks Shawn its not much but a little bit is better than nothing I guess Posted via Mobile Device __________________ 67 SWB Custom "JANE" http://67-72chevytrucks.com/vboard/s...d.php?t=554024 Northwest C10's http://www.facebook.com/#!/groups/Norhtwestc10s/ Cameron sparks

02-21-2013, 11:59 PM	#34
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,685	Re: 67 SWB Custom "Jane" Piece by Piece project Pumpkin will hit the bed floor before you get that far. Put a snubber in there and go. Posted via Mobile Device __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

03-02-2013, 01:20 PM	#36
kac383 Registered User Join Date: Feb 2011 Location: Puyallup, WA Posts: 11	Re: 67 SWB Custom "Jane" Piece by Piece project Looking Like a great build, keep up the work.

03-02-2013, 07:08 PM	#38
kac383 Registered User Join Date: Feb 2011 Location: Puyallup, WA Posts: 11	Re: 67 SWB Custom "Jane" Piece by Piece project Hello Fastcam, ya I have 69 longbed that I am building. It is a slow project as I am building it as I get money, however income tax check arrived last week so that has gave it a boost for a while. I haven't started a buildthread on here yet, I want to get alittle farther on it. Kevin

03-05-2013, 09:08 AM	#39
Fatkid1983 Registered User Join Date: Feb 2012 Location: yelm Wa. Posts: 423	Re: 67 SWB Custom "Jane" Piece by Piece project Looking good man! Its going to be damn nice when its done! Posted via Mobile Device __________________ 1971 chevy c10 cheyenne. Bagged. New paint and some other mods. 1999 ford f350 superduty 7.3 powerstroke everything banks 1975 c10 swb "parts runner" <----SOLD NorthWest C10's http://www.facebook.com/#!/groups/Norhtwestc10s/

03-05-2013, 10:46 AM	#41
Fatkid1983 Registered User Join Date: Feb 2012 Location: yelm Wa. Posts: 423	Re: 67 SWB Custom "Jane" Piece by Piece project Just take your time and the end result will be worth it! Posted via Mobile Device __________________ 1971 chevy c10 cheyenne. Bagged. New paint and some other mods. 1999 ford f350 superduty 7.3 powerstroke everything banks 1975 c10 swb "parts runner" <----SOLD NorthWest C10's http://www.facebook.com/#!/groups/Norhtwestc10s/

03-05-2013, 10:48 AM	#42
fastcam1 Young gun Join Date: Feb 2009 Location: Spanaway WA Posts: 631	Re: 67 SWB Custom "Jane" Piece by Piece project Ya I here you but I just get all antsy being around everyone else's truck like the meet last week, makes me just want to slap it together and go! Posted via Mobile Device __________________ 67 SWB Custom "JANE" http://67-72chevytrucks.com/vboard/s...d.php?t=554024 Northwest C10's http://www.facebook.com/#!/groups/Norhtwestc10s/ Cameron sparks

03-05-2013, 10:49 AM	#43
Fatkid1983 Registered User Join Date: Feb 2012 Location: yelm Wa. Posts: 423	Re: 67 SWB Custom "Jane" Piece by Piece project But think if you go as you are youll have the nicest one at the meets Posted via Mobile Device __________________ 1971 chevy c10 cheyenne. Bagged. New paint and some other mods. 1999 ford f350 superduty 7.3 powerstroke everything banks 1975 c10 swb "parts runner" <----SOLD NorthWest C10's http://www.facebook.com/#!/groups/Norhtwestc10s/

03-05-2013, 10:59 AM	#44
fastcam1 Young gun Join Date: Feb 2009 Location: Spanaway WA Posts: 631	Re: 67 SWB Custom "Jane" Piece by Piece project As long as I can keep Chris from starting on his dropmember truck you might be right Posted via Mobile Device __________________ 67 SWB Custom "JANE" http://67-72chevytrucks.com/vboard/s...d.php?t=554024 Northwest C10's http://www.facebook.com/#!/groups/Norhtwestc10s/ Cameron sparks

03-05-2013, 11:00 AM	#45
Fatkid1983 Registered User Join Date: Feb 2012 Location: yelm Wa. Posts: 423	Re: 67 SWB Custom "Jane" Piece by Piece project Lol. When is he starting that one? Posted via Mobile Device __________________ 1971 chevy c10 cheyenne. Bagged. New paint and some other mods. 1999 ford f350 superduty 7.3 powerstroke everything banks 1975 c10 swb "parts runner" <----SOLD NorthWest C10's http://www.facebook.com/#!/groups/Norhtwestc10s/



Register or Log In To remove these advertisements.

03-05-2013, 11:09 AM	#46
fastcam1 Young gun Join Date: Feb 2009 Location: Spanaway WA Posts: 631	Re: 67 SWB Custom "Jane" Piece by Piece project Who knows he's always to busy buying parts and parts trucks. Plus I stole the frame that he had already started with Posted via Mobile Device __________________ 67 SWB Custom "JANE" http://67-72chevytrucks.com/vboard/s...d.php?t=554024 Northwest C10's http://www.facebook.com/#!/groups/Norhtwestc10s/ Cameron sparks

03-05-2013, 12:24 PM	#48
67ctener Registered User Join Date: Oct 2012 Location: Arlington Washington Posts: 1,808	Re: 67 SWB Custom "Jane" Piece by Piece project Lookin good, I wish my bumper was that low to the ground Posted via Mobile Device __________________ Scott 67 c10 sold 89 c1500 90 k2500 91 s10 #chevyonly

03-05-2013, 05:59 PM	#50
Fatkid1983 Registered User Join Date: Feb 2012 Location: yelm Wa. Posts: 423	Re: 67 SWB Custom "Jane" Piece by Piece project hey i was going to tell ya if you need any help working on that thing let me know! im in yelm so im close and always looking for something to do lol __________________ 1971 chevy c10 cheyenne. Bagged. New paint and some other mods. 1999 ford f350 superduty 7.3 powerstroke everything banks 1975 c10 swb "parts runner" <----SOLD NorthWest C10's http://www.facebook.com/#!/groups/Norhtwestc10s/

Register or Log In To remove these advertisements.