MI 1972 K5 Blazer - Part out - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

pkz71 · 10-13-2014, 12:12 AM

OK. I will take the visors. Please PM me your payment info.

1972 Jimmy · 10-13-2014, 05:47 AM

Are the frt bumper brackets still availible? If so are they straight and in good shape?
Thanks,
Eric

**DaHos** · 10-13-2014, 06:24 AM

Quote:

Originally Posted by pkz71

OK. I will take the visors. Please PM me your payment info.

PM sent.

Quote:

Originally Posted by 1972 Jimmy

Are the frt bumper brackets still availible? If so are they straight and in good shape?
Thanks,
Eric

No front bumper brackets.

pkz71 · 10-13-2014, 07:49 PM

Payment sent.

**DaHos** · 10-14-2014, 01:23 PM

All paid items have shipped. Thx much!

68C20 · 10-15-2014, 08:11 AM

I will take the gas filler tube. Does the vent tube come with it as well? Send me a pm with your paypal and I settle up with you.
Thanks

**DaHos** · 10-15-2014, 08:32 AM

Good Morning !

I will include the vent tube for an additional $25, total is $75 for filler and vent tubes shipped.

Quote:

Originally Posted by 68C20

I will take the gas filler tube. Does the vent tube come with it as well? Send me a pm with your paypal and I settle up with you.
Thanks

**DaHos** · 10-15-2014, 08:38 AM

I also have disassembled the seats and brackets. The DS skirt has surface rust but still usable, the pass side skirt has rot on the back edges. DS LH track is missing a mounting bolt tab on the outer edge and the pass side front inner is also rotted on the lower. These would still make a usable pair for parts or complete redo. Id like $200 for seats and brackets.

68C20 · 10-15-2014, 09:07 AM

Quote:

Originally Posted by DaHos

Good Morning !

I will include the vent tube for an additional $25, total is $75 for filler and vent tubes shipped.

Sounds good to me. Send me your paypal info and I will settle up with you. I will take the filler and vent.

Thanks

Wasted Income · 10-15-2014, 09:46 AM

Not sure how complete or rough/cut up the cab harness is, but I'm looking for the pigtail and socket for the HVAC control light, and the plug for the back of the cigarette lighter.

Thanks.

**DaHos** · 10-15-2014, 10:03 AM

Quote:

Originally Posted by Wasted Income

Not sure how complete or rough/cut up the cab harness is, but I'm looking for the pigtail and socket for the HVAC control light, and the plug for the back of the cigarette lighter.

Thanks.

I will check my harness and see if I have a good uncut heater light setup. I have some nice complete lighter harness (fuse panel to lighter). I will let you know this eve. Thx !

Wasted Income · 10-15-2014, 10:36 AM

Quote:

Originally Posted by DaHos

I will check my harness and see if I have a good uncut heater light setup. I have some nice complete lighter harness (fuse panel to lighter). I will let you know this eve. Thx !

Sounds good. I meant that if you have a harness that is already kinda junky or hacked up, I'd be interested in you hacking off that pigtail with the light socket, so I can solder it to my existing harness.

But I'd be up for whatever. Thanks.

grillzy · 10-15-2014, 04:51 PM

Quote:

Originally Posted by DaHos

I also have disassembled the seats and brackets. The DS skirt has surface rust but still usable, the pass side skirt has rot on the back edges. DS LH track is missing a mounting bolt tab on the outer edge and the pass side front inner is also rotted on the lower. These would still make a usable pair for parts or complete redo. Id like $200 for seats and brackets.

Can I see pictures of these? Thanks

**DaHos** · 10-15-2014, 07:52 PM

Brackets:

**DaHos** · 10-15-2014, 07:55 PM

Drivers side seat:

**DaHos** · 10-15-2014, 07:56 PM

Pass side:

**DaHos** · 10-15-2014, 08:21 PM

Quote:

Originally Posted by Wasted Income

Sounds good. I meant that if you have a harness that is already kinda junky or hacked up, I'd be interested in you hacking off that pigtail with the light socket, so I can solder it to my existing harness.

But I'd be up for whatever. Thanks.

Got em. $15 shipped? Pics:

rayray767 · 10-15-2014, 08:50 PM

I would be interested in the doors pending more pics front,back,side, bottoms

grillzy · 10-16-2014, 07:14 AM

I'll pass on the seats. Thanks

Luis_gz06 · 10-16-2014, 08:07 AM

Do you have the screws for the door deflectors?

**DaHos** · 10-17-2014, 10:26 AM

Quote:

Originally Posted by rayray767

I would be interested in the doors pending more pics front,back,side, bottoms

Doors are junk. Guts and cuts only

Quote:

Originally Posted by grillzy

I'll pass on the seats. Thanks

Understand

Quote:

Originally Posted by Luis_gz06

Do you have the screws for the door deflectors?

I believe I do. Will take a look tonight.

Ctgry5 · 10-17-2014, 09:23 PM

Quote:

Originally Posted by DaHos

All paid items have shipped. Thx much!

Hatch Struts received... Thx

**D.PASSMORE** · 10-18-2014, 09:52 PM

On the bedsides/quarter panels - is there any Single wall mounting brackets under the inside upper lips? If so, let discuss price. Thanks David

crashflow · 10-18-2014, 11:26 PM

I want the seat brackets. How much shipped to SD 57719

**DaHos** · 10-19-2014, 09:44 AM

Quote:

Originally Posted by Luis_gz06

Do you have the screws for the door deflectors?

Only have 4 of them.

Quote:

Originally Posted by D.PASSMORE

On the bedsides/quarter panels - is there any Single wall mounting brackets under the inside upper lips? If so, let discuss price. Thanks David

It was a double wall top, sry.

Quote:

Originally Posted by crashflow

I want the seat brackets. How much shipped to SD 57719

$60 shipped

10-13-2014, 12:12 AM	#26
pkz71 Registered User Join Date: Dec 2013 Location: Bothell, WA Posts: 30	Re: 1972 K5 Blazer - Part out OK. I will take the visors. Please PM me your payment info.

10-13-2014, 05:47 AM	#27
1972 Jimmy Registered User Join Date: Nov 2012 Location: Freeland, Michigan Posts: 1,385	Re: 1972 K5 Blazer - Part out Are the frt bumper brackets still availible? If so are they straight and in good shape? Thanks, Eric

10-13-2014, 07:49 PM	#29
pkz71 Registered User Join Date: Dec 2013 Location: Bothell, WA Posts: 30	Re: 1972 K5 Blazer - Part out Payment sent.

10-14-2014, 01:23 PM	#30
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,854	Re: 1972 K5 Blazer - Part out All paid items have shipped. Thx much! __________________ 1967 C10 SWB Owner - Rustbelt Restorations

10-15-2014, 08:11 AM	#31
68C20 Registered User Join Date: May 2009 Location: Helena, AL Posts: 86	Re: 1972 K5 Blazer - Part out I will take the gas filler tube. Does the vent tube come with it as well? Send me a pm with your paypal and I settle up with you. Thanks __________________ Russ 68 C20 long bed Stepside Daily Driver 64 Oldsmobile Dynamic 88

10-15-2014, 08:38 AM	#33
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,854	Re: 1972 K5 Blazer - Part out I also have disassembled the seats and brackets. The DS skirt has surface rust but still usable, the pass side skirt has rot on the back edges. DS LH track is missing a mounting bolt tab on the outer edge and the pass side front inner is also rotted on the lower. These would still make a usable pair for parts or complete redo. Id like $200 for seats and brackets. __________________ 1967 C10 SWB Owner - Rustbelt Restorations

10-15-2014, 09:46 AM	#35
Wasted Income Boosted Member Join Date: May 2002 Location: Mackinaw, IL Posts: 2,200	Re: 1972 K5 Blazer - Part out Not sure how complete or rough/cut up the cab harness is, but I'm looking for the pigtail and socket for the HVAC control light, and the plug for the back of the cigarette lighter. Thanks. __________________ 1972 2wd K/5 Blazer Turbocharged 370 LSx - 941 rwhp / 1093 rwtq 1969 Chevy K-10 L33 5.3 / 4L80E / NP241 / 4" lift 1964 Buick Skylark Twin TURBO 383 LS pro-touring project 2014 VW Passat TDI - Daily Driver Turbo diesel 2015 Sierra Denali HD Duramax Turbo diesel 2016 Ford Explorer Sport - Twin Turbskis 2017 Polaris RZR Turbo 2014 Nor-Tech Center Console - Twin Supercharged Outboards *TURBO ALL THE THINGS!!*

10-15-2014, 07:52 PM	#39
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,854	Re: 1972 K5 Blazer - Part out Brackets: Attached Images __________________ 1967 C10 SWB Owner - Rustbelt Restorations

10-15-2014, 07:55 PM	#40
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,854	Re: 1972 K5 Blazer - Part out Drivers side seat: Attached Images __________________ 1967 C10 SWB Owner - Rustbelt Restorations

10-15-2014, 07:56 PM	#41
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,854	Re: 1972 K5 Blazer - Part out Pass side: Attached Images __________________ 1967 C10 SWB Owner - Rustbelt Restorations

10-15-2014, 08:50 PM	#43
rayray767 Registered User Join Date: Apr 2012 Location: Columbus Ohio Posts: 1,135	Re: 1972 K5 Blazer - Part out I would be interested in the doors pending more pics front,back,side, bottoms

10-16-2014, 07:14 AM	#44
grillzy Registered User Join Date: Jan 2014 Location: belleville ontario Posts: 354	Re: 1972 K5 Blazer - Part out I'll pass on the seats. Thanks

10-16-2014, 08:07 AM	#45
Luis_gz06 Senior Member Join Date: Feb 2006 Location: Las Vegas Posts: 1,378	Re: 1972 K5 Blazer - Part out Do you have the screws for the door deflectors? __________________ 1972 Chevrolet Blazer 4x4 (Almost done stay tuned) 1970 Chevrolet Pickup Longhorn CST/20 (SOLD)

10-18-2014, 09:52 PM	#48
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,055	Re: 1972 K5 Blazer - Part out On the bedsides/quarter panels - is there any Single wall mounting brackets under the inside upper lips? If so, let discuss price. Thanks David __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

10-18-2014, 11:26 PM	#49
crashflow Registered User Join Date: Sep 2014 Location: Black Hills South Dakota Posts: 19	Re: 1972 K5 Blazer - Part out I want the seat brackets. How much shipped to SD 57719 __________________ 1972 blazer in progress. 1969/1988 conversion shortbox4x4. 1969 blazer in progress. 1951 5 window 1/2 pickup. 1969 big block gto.(wife's car).



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.