NOS Tail Light Bezel Clips and Other Hardware for asolde

[Minnz]

Originally Posted by Classic Bowties

Yes we can supply you with your list, please confirm quantity though. Two sets of the divider trim clips would be 24 clips. One set of the bezel screws and ferrules would be as you have listed 4 of each.



Ed, yes as listed/pictured in first post one tail bezel screw/ferrule set (for two bezels) is four of each item. For two T/L bezels, a quantity of 8 mounting clips would be needed. Please confirm if wanting the clips in GM NOS or repro, for now I will put you inline for an NOS set but at this time we are only going to be offering a couple of more set of these GM tail bezel mounting clips. I need to keep some on hand for future projects and or to sell/offer along with our NOS tail light bezels. Quantity on hand was limited in the first place, I very much misjudged interest between both this thread and the disappearing one and also over the phone sales over the last five days. Let me know



Please see above reply about the limited supply on the NOS T/L bezel mounting clips. At this time we can set you up with your requested hardware (listed below), will combine ship all of it for $6.80 sent USPS priority insured/small flat rate box. Thanks, Mel.

$36. / Qty. 8 NOS tail light bezel clips @ $4.50 ea.
$ 3. / Qty. 1 Repro tail light bezel screw & ferrule set
$39.

Also, did you ever find/locate the NOS rear lenses that you had requested in one of our other threads? We are getting ready to pull some NOS lenses out of inventory to list.

Mel,

Great, I am definitely in for the order above ($39 + shipping). Can I get your PayPal payment details?

I did locate some NOS rear lenses, so I'm good there. Any NOS side amber lenses available (standard)?

Also, would you have an used original accelerator cable for a 1972, 350 4wd?

Thanks,
Lee

[35boulder]

I would take 8 of the clips and 4 of the screws. I hope some are still available.
Thanks

[ochre 72]

I would like to order is a set of clips and screws if any are still available.

[jaybirdk5]

Would like to purchase (2) sets of NOS clips and screws for tail light bezels.

[Undone]

Originally Posted by Classic Bowties

Yes we can supply you with your list, please confirm quantity though. Two sets of the divider trim clips would be 24 clips. One set of the bezel screws and ferrules would be as you have listed 4 of each.



Ed, yes as listed/pictured in first post one tail bezel screw/ferrule set (for two bezels) is four of each item. For two T/L bezels, a quantity of 8 mounting clips would be needed. Please confirm if wanting the clips in GM NOS or repro, for now I will put you inline for an NOS set but at this time we are only going to be offering a couple of more set of these GM tail bezel mounting clips. I need to keep some on hand for future projects and or to sell/offer along with our NOS tail light bezels. Quantity on hand was limited in the first place, I very much misjudged interest between both this thread and the disappearing one and also over the phone sales over the last five days. Let me know



Please see above reply about the limited supply on the NOS T/L bezel mounting clips. At this time we can set you up with your requested hardware (listed below), will combine ship all of it for $6.80 sent USPS priority insured/small flat rate box. Thanks, Mel.

$36. / Qty. 8 NOS tail light bezel clips @ $4.50 ea.
$ 3. / Qty. 1 Repro tail light bezel screw & ferrule set
$39.

Also, did you ever find/locate the NOS rear lenses that you had requested in one of our other threads? We are getting ready to pull some NOS lenses out of inventory to list.

Yes, That is correct, 24 divider trim clips and 4 each bezel screws and ferrules.

[Undone]

Originally Posted by Undone

Yes, That is correct, 24 divider trim clips and 4 each bezel screws and ferrules.

Payment sent

[Jeff's bowtie's]

Hey Mel I got the clips today very nice parts I'm looking forward to future purchases thanks again Jeff

[Elliot949]

I will take all of what is left of the rear tail light Bezel clips and the Screw/ Ferrels for them...

Thanks...

[Ed F]

Ed, yes as listed/pictured in first post one tail bezel screw/ferrule set (for two bezels) is four of each item. For two T/L bezels, a quantity of 8 mounting clips would be needed. Please confirm if wanting the clips in GM NOS or repro, for now I will put you inline for an NOS set but at this time we are only going to be offering a couple of more set of these GM tail bezel mounting clips. I need to keep some on hand for future projects and or to sell/offer along with our NOS tail light bezels. Quantity on hand was limited in the first place, I very much misjudged interest between both this thread and the disappearing one and also over the phone sales over the last five days. Let me know

If you enough clips and screws for one pair of bezels I would still like to have them. Thanks, Ed

[72 Super]

Hi Mel, please put me inline if you offer any of this hardware in the future. If there is anything availble now please let me know.

Thank you,
Ray

[Classic Bowties]

Originally Posted by Undone

Payment sent

Your repro paint divider clips and the T/L bezel screw & ferrule set are under way, your package went out USPS first class Tues. 03/01. The projected delivery date listed on the postal receipt is Sat. 03/05. Thanks again, Mel.

[Classic Bowties]

Originally Posted by 35boulder

I would take 8 of the clips and 4 of the screws. I hope some are still available.
Thanks

Originally Posted by ochre 72

I would like to order is a set of clips and screws if any are still available.

Originally Posted by jaybirdk5

Would like to purchase (2) sets of NOS clips and screws for tail light bezels.

Originally Posted by Elliot949

I will take all of what is left of the rear tail light Bezel clips and the Screw/ Ferrels for them... Thanks...

Originally Posted by 72 Super

Hi Mel, please put me inline if you offer any of this hardware in the future. If there is anything availble now please let me know. Thank you, Ray

As stated back on the 28th in post #23, members Ed F and Minnz each had first call (per order of post) on the last two full sets of NOS tail light bezel mounting clips that we are offering at this time. All other hardware listed in this thread is available yet, as are the tail light bezel screw/ferrule sets and we can still supply the 8 needed tail light bezel mounting clips in repro for $8. set. Mel

[Classic Bowties]

Originally Posted by D.PASSMORE

I'll take 3 sets of paint divided clips./ 1 sets taillight screws and ferrules. Pm me your info. Thx

David, three sets of repro paint divider molding clips (36) would be $18. plus $3. on the T/L bezel screw/ferrule set, your shipping options are $4. sent USPS first class in a cushion mailer or $6.80 sent in a USPS priority small box. Per our earlier discussion, here are the specially designed T head screw in shoulder studs used for mounting these paint divider molding clips on non-original paint divider cabs, these studs are $5. per set of 12. We just sent our payment info for sending funds via paypal. Thanks, Mel.

[Classic Bowties]

Originally Posted by Ed F

If you enough clips and screws for one pair of bezels I would still like to have them. Thanks, Ed

Yes, per order of thread post one set of NOS bezel clips were put aside for you, will ship the below listed items for $6.80 sent USPS priority insured/small flat rate box. Our paypal info has been sent, Mel.

$36. / Qty. 8 NOS tail light bezel clips @ $4.50 ea.
$ 3. / Qty. 1 Repro tail light bezel screw & ferrule set
$39.

[Classic Bowties]

Originally Posted by Minnz

Mel,

Great, I am definitely in for the order above ($39 + shipping). Can I get your PayPal payment details?

I did locate some NOS rear lenses, so I'm good there. Any NOS side amber lenses available (standard)?

Also, would you have an used original accelerator cable for a 1972, 350 4wd?

Thanks,
Lee

Lee, per your add ons listed below is what we would have on hand ready to ship out. If you end up going with a pair of marker lenses your combined shipping will end up jumping to the USPS med. flat rate box ($13.45) due to size. Also, if you need/want nice side marker lens mounting hardware we can help with this quality U.S. hardware for $6. per 16 piece set. Will send our info for sending funds via paypal now. Mel

OE used 72 4wd throttle cable V-8 & 4 barrel carb. $35.
GM amber side marker lenses "later style" w/o Guidex script. $30. ea.
-Or-
GM old stock amber side marker lenses with Guidex script. $50. ea.

[Classic Bowties]

Pics for Minnz...

[Ed F]

Payment sent.
Thanks, Ed

[Minnz]

PM sent.
Payment via PayPal sent.

Thanks,
Lee

[jaybirdk5]

Mel, I would like to purchase bezel clips and screws.

[Classic Bowties]

Originally Posted by Minnz

PM sent.
Payment via PayPal sent.

Thanks,
Lee

Hi Lee, we just recieved your speedy paypal payment, please confirm what you are purchasing as the amount sent is not adding up correctly. Thanks, Mel.

[Classic Bowties]

Originally Posted by D.PASSMORE

I'll take 3 sets of paint divided clips./ 1 sets taillight screws and ferrules. Pm me your info. Thx

Dave, we have recieved your paypal funds, for the dollar amount to work out you are adding 3 sets of the screw in studs (36) to the above listed items and also wanting USPS priority shipment. Please confirm this and we will get your stuff ready for shipment. Thanks, Mel.

Originally Posted by jaybirdk5

Mel, I would like to purchase bezel clips and screws.

Please see above post #23 & #37, the last two available NOS T/L bezel clip sets were on hold for two members by order posted interest in thread, which as of today both have followed through and paid. We can supply you with the tail light bezel clips (8), screws (4) and ferrules (4) in high quality repro for $11. plus ship cost.

[D.PASSMORE]

[QUOTE=Classic Bowties;7506684]Dave, we have recieved your paypal funds, for the dollar amount to work out you are adding 3 sets of the screw in studs (36) to the above listed items and also wanting USPS priority shipment. Please confirm this and we will get your stuff ready for shipment. Thanks, Mel.



RGR!

[Minnz]

Originally Posted by Classic Bowties

Hi Lee, we just recieved your speedy paypal payment, please confirm what you are purchasing as the amount sent is not adding up correctly. Thanks, Mel.

Opps, forgot to add the shipping cost. Will send shortly.

Lee

[Classic Bowties]

Originally Posted by Ed F

Payment sent.
Thanks, Ed

Originally Posted by Minnz

PM sent.
Payment via PayPal sent. Thanks, Lee

Originally Posted by D.PASSMORE

RGR!

For the three of you above, your requested hardware is under way. The packages went out USPS priority insured yesterday 03/02. All three packages per the USPS receipt are projected to arrive Fri. 03/04. Thanks again, Mel.

[72 Super]

Mel, I will take 4 sets of the tail light bezel screws/furrells along with antenna items on the other post

Thank you,
Ray