OR Parting out 71 Cheyenne C20 - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tony Woodward · 02-27-2016, 12:35 AM

Name: image.jpg
Views: 376
Size: 92.2 KB

looking for the spacer on upper A arm I'm looking for the round one with a dish in it. In the picture the hand is touching it. It goes between the frame and upper a arm shaft

rusty knuckles 5 · 02-27-2016, 12:51 AM

wow this truck is a keeper

**Blue/72** · 02-27-2016, 01:08 AM

And a price on the bed header panel and some pictures if possible? Condition?

**68bowtie** · 02-27-2016, 02:35 AM

pass on the cab trim and markers. thank you.

DLTruck1973 · 02-27-2016, 05:21 AM

Quote:

Originally Posted by Blue/72

Could you do $110 for both picked up at the meet pending inspection? I can PayPal you a down payment for it if you needed it

Ok...so the bumper and the grill shell for 110.00? If so I would have to pass. The bumper is very nice and well worth the 100.00, aftermarket's are 160.00 up plus shipping. As for the outer grill it would be worth a min of 50.00.
Thanks, Tom

DLTruck1973 · 02-27-2016, 05:30 AM

Quote:

Originally Posted by Tony Woodward

Attachment 1503461 looking for the spacer on upper A arm I'm looking for the round one with a dish in it. In the picture the hand is touching it. It goes between the frame and upper a arm shaft

1/2T or 3/4t? Year?

Quote:

Originally Posted by rusty knuckles 5

wow this truck is a keeper

Yes it is but with a junk engine it doesn't pencil out to save it compared to the parts value.

Quote:

Originally Posted by Blue/72

And a price on the bed header panel and some pictures if possible? Condition?

I'm going to keep the panel with the bed for now.Sorry

Quote:

Originally Posted by 68bowtie

pass on the cab trim and markers. thank you.

Ok no problem.

1972larry · 02-27-2016, 05:50 AM

Need tail light harness that plugs up front and runs to the back along the frame . shipped to 65774

**Oddfire** · 02-27-2016, 07:15 AM

My zip is 22630. Is there any way you can get the headliner trim off without breaking or cracking...lol I know... right? Anyhow if you attempt it & are successful id be interested. Jamie

**Dave** · 02-27-2016, 09:58 AM

I need price and pics on the following, fuel tank selector, shield if equipped, fuel doors, headliner with trim and aux battery tray. Thx

Ed F · 02-27-2016, 11:43 AM

The mirror picture is a little fuzzy. If there are no dents in them I will take them for $75 plus shipping

**Blue/72** · 02-27-2016, 01:14 PM

Just the bumper and cargo light trim plate for $110, I will pass on the outer. Pm on the way

ranger danger · 02-27-2016, 01:16 PM

Do you have a center link? How much shipped to 95687? Paypal? Thanks

DLTruck1973 · 02-27-2016, 02:35 PM

Quote:

Originally Posted by 1972larry

Need tail light harness that plugs up front and runs to the back along the frame . shipped to 65774

23.00 shipped

Quote:

Originally Posted by Oddfire

My zip is 22630. Is there any way you can get the headliner trim off without breaking or cracking...lol I know... right? Anyhow if you attempt it & are successful id be interested. Jamie

22.50 shipping, The only way to get the trim off is to cut a big hole in the roof skin and pop them off from the back side. IF I could get any of it off I would need it for my build.

Quote:

Originally Posted by Dave

I need price and pics on the following, fuel tank selector, shield if equipped, fuel doors, headliner with trim and aux battery tray. Thx

I'm keeping the trim if I can save it. I'll get pics of the other.

Quote:

Originally Posted by Ed F

The mirror picture is a little fuzzy. If there are no dents in them I will take them for $75 plus shipping

I'll look at them and get more pics.

Quote:

Originally Posted by ranger danger

Do you have a center link? How much shipped to 95687? Paypal? Thanks

Center link for a 71-72 C20? If so yes. 50.00 shipped

Quote:

Originally Posted by Blue/72

Just the bumper and cargo light trim plate for $110, I will pass on the outer. Pm on the way

ok

**Oddfire** · 02-27-2016, 02:51 PM

Ok give me a total on my tab so far. Jamie

oldchevynut · 02-27-2016, 02:58 PM

Price on TH350 shift linkage complete from bottom of column to transmission including frame bracket and the complete cable type throttle linkage setup from pedal to carb. Shipped to 16374.

sherm6413 · 02-27-2016, 02:59 PM

Are the rear bedside support bars available? Approx 15" and go f cross sill to bottom of bedside ....?? And how about the two small front bumper brackets only.. Thanks

**Dave** · 02-27-2016, 05:11 PM

Quote:

Originally Posted by DLTruck1973

23.00 shipped

22.50 shipping, The only way to get the trim off is to cut a big hole in the roof skin and pop them off from the back side. IF I could get any of it off I would need it for my build.

I'm keeping the trim if I can save it. I'll get pics of the other.

I'll look at them and get more pics.

Center link for a 71-72 C20? If so yes. 50.00 shipped

ok

Ok, sounds good.

Tony Woodward · 02-27-2016, 05:24 PM

Looking for the 70 1/2

jaybatta · 02-27-2016, 05:31 PM

Any news on the lighter?

**Blue/72** · 02-27-2016, 07:16 PM

Can I get a price and condition of the ashtray too please? Just the tray, not the slider housing

**craneboy72** · 02-28-2016, 10:18 AM

Can u post a pick of the rear marker lights and a price shipped to 01720?

ranger danger · 02-28-2016, 10:47 AM

I sent you a PM on the center link. I'll take it.

DLTruck1973 · 02-28-2016, 12:18 PM

Quote:

Originally Posted by Oddfire

Ok give me a total on my tab so far. Jamie

Jamie, Air cleaner 45.00, 4 core mounts 45.00, Shipping 22.50 Total 112.50 Did I miss anything? I'll definitely keep you in mind for headliner trim in future trucks.

Quote:

Originally Posted by oldchevynut

Price on TH350 shift linkage complete from bottom of column to transmission including frame bracket and the complete cable type throttle linkage setup from pedal to carb. Shipped to 16374.

120.00 shipped

Quote:

Originally Posted by sherm6413

Are the rear bedside support bars available? Approx 15" and go f cross sill to bottom of bedside ....?? And how about the two small front bumper brackets only.. Thanks

27.00 shipped on the support bars. Add the brackets to the package for 45.00 shipped

Quote:

Originally Posted by Dave

Ok, sounds good.

pics to come

Quote:

Originally Posted by Tony Woodward

Looking for the 70 1/2

7.50 mailed

Quote:

Originally Posted by jaybatta

Any news on the lighter?

I'm not near the truck till Monday. There is a possibility of running out to the shop later today though.

Quote:

Originally Posted by Blue/72

Can I get a price and condition of the ashtray too please? Just the tray, not the slider housing

Sure.

Quote:

Originally Posted by craneboy72

Can u post a pick of the rear marker lights and a price shipped to 01720?

Yes

Quote:

Originally Posted by ranger danger

I sent you a PM on the center link. I'll take it.

Pm recieved

jaybatta · 02-28-2016, 12:19 PM

Ok thanks, let me know

Joe

Tony Woodward · 02-28-2016, 12:25 PM

PM sent

02-27-2016, 12:35 AM	#26
Tony Woodward Registered User Join Date: Nov 2015 Location: Midland texas Posts: 13	Re: Parting out 71 Cheyenne C20 looking for the spacer on upper A arm I'm looking for the round one with a dish in it. In the picture the hand is touching it. It goes between the frame and upper a arm shaft

02-27-2016, 12:51 AM	#27
rusty knuckles 5 Registered User Join Date: Dec 2011 Location: coulterville calif Posts: 263	Re: Parting out 71 Cheyenne C20 wow this truck is a keeper

02-27-2016, 01:08 AM	#28
Blue/72 Senior Member Join Date: Aug 2014 Location: Sandy, Oregon Posts: 2,376	Re: Parting out 71 Cheyenne C20 And a price on the bed header panel and some pictures if possible? Condition? __________________ My dad always says that HEI distributers are pointless... •1972 Custom/10 Deluxe. My first truck and I've had it since I was 7. Tilt, tach, AM/FM, 350, deep dish rally's, original paint and an increasing amount of NOS jewelry. It's always taking my money.. •1967 c10 with tach, dropped 3/5 on deep dish rally's •1972 Cheyenne Super. Sold

02-27-2016, 02:35 AM	#29
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,497	Re: Parting out 71 Cheyenne C20 pass on the cab trim and markers. thank you. __________________ I live in California, but identify as a Texan "If a job's worth doing, it's worth doing well" Survivor "Lil’ Mint" (67 c10 40k mile light green original paint) Project "C10 Fever" (68 factory black 396 swb) Project "Little Sister" (70 c10 blue original paint refresh) Project "Blue Bomb" (70 c30 blue original paint refresh) SOLD Project "Vitamin C" (71 c10 orange original paint refresh) SOLD

02-27-2016, 05:50 AM	#32
1972larry Registered User Join Date: Jan 2014 Location: weaubleau mo Posts: 166	Re: Parting out 71 Cheyenne C20 Need tail light harness that plugs up front and runs to the back along the frame . shipped to 65774

02-27-2016, 07:15 AM	#33
Oddfire Senior Member Join Date: Jan 2013 Location: Front Royal, Va Posts: 689	Re: Parting out 71 Cheyenne C20 My zip is 22630. Is there any way you can get the headliner trim off without breaking or cracking...lol I know... right? Anyhow if you attempt it & are successful id be interested. Jamie

02-27-2016, 09:58 AM	#34
Dave DND Trucks Join Date: Dec 1999 Location: NW Indiana Posts: 2,376	Re: Parting out 71 Cheyenne C20 I need price and pics on the following, fuel tank selector, shield if equipped, fuel doors, headliner with trim and aux battery tray. Thx

02-27-2016, 11:43 AM	#35
Ed F Registered User Join Date: Dec 2015 Location: Holland Mi. Posts: 302	Re: Parting out 71 Cheyenne C20 The mirror picture is a little fuzzy. If there are no dents in them I will take them for $75 plus shipping

02-27-2016, 01:14 PM	#36
Blue/72 Senior Member Join Date: Aug 2014 Location: Sandy, Oregon Posts: 2,376	Re: Parting out 71 Cheyenne C20 Just the bumper and cargo light trim plate for $110, I will pass on the outer. Pm on the way __________________ My dad always says that HEI distributers are pointless... •1972 Custom/10 Deluxe. My first truck and I've had it since I was 7. Tilt, tach, AM/FM, 350, deep dish rally's, original paint and an increasing amount of NOS jewelry. It's always taking my money.. •1967 c10 with tach, dropped 3/5 on deep dish rally's •1972 Cheyenne Super. Sold

02-27-2016, 01:16 PM	#37
ranger danger Registered User Join Date: Jan 2015 Location: Vacaville CA Posts: 896	Re: Parting out 71 Cheyenne C20 Do you have a center link? How much shipped to 95687? Paypal? Thanks __________________ 1969 C20 Suburban "Rez Dog" Rebuild America one testicle at a time. US Army 1977-1979 12B Combat Engineer US Navy 1979-1983 Gunners Mate Guns (GMG) NRA Life Member Unrestrained Children in back seats cause Accidents. Unrestrained Accidents in back seats cause Children.

02-27-2016, 02:51 PM	#39
Oddfire Senior Member Join Date: Jan 2013 Location: Front Royal, Va Posts: 689	Re: Parting out 71 Cheyenne C20 Ok give me a total on my tab so far. Jamie

02-27-2016, 02:58 PM	#40
oldchevynut Registered User Join Date: Dec 2013 Location: northwestern PA Posts: 54	Re: Parting out 71 Cheyenne C20 Price on TH350 shift linkage complete from bottom of column to transmission including frame bracket and the complete cable type throttle linkage setup from pedal to carb. Shipped to 16374.

02-27-2016, 02:59 PM	#41
sherm6413 Registered User Join Date: Mar 2015 Location: Hannibal mo Posts: 281	Re: Parting out 71 Cheyenne C20 Are the rear bedside support bars available? Approx 15" and go f cross sill to bottom of bedside ....?? And how about the two small front bumper brackets only.. Thanks

02-27-2016, 05:24 PM	#43
Tony Woodward Registered User Join Date: Nov 2015 Location: Midland texas Posts: 13	Re: Parting out 71 Cheyenne C20 Looking for the 70 1/2

02-27-2016, 05:31 PM	#44
jaybatta Registered User Join Date: Apr 2014 Location: Livingston, MT Posts: 837	Re: Parting out 71 Cheyenne C20 Any news on the lighter? __________________ Joe 1968 K20 1970 K20 Semper Fi



Register or Log In To remove these advertisements.

02-27-2016, 07:16 PM	#45
Blue/72 Senior Member Join Date: Aug 2014 Location: Sandy, Oregon Posts: 2,376	Re: Parting out 71 Cheyenne C20 Can I get a price and condition of the ashtray too please? Just the tray, not the slider housing __________________ My dad always says that HEI distributers are pointless... •1972 Custom/10 Deluxe. My first truck and I've had it since I was 7. Tilt, tach, AM/FM, 350, deep dish rally's, original paint and an increasing amount of NOS jewelry. It's always taking my money.. •1967 c10 with tach, dropped 3/5 on deep dish rally's •1972 Cheyenne Super. Sold

02-28-2016, 10:18 AM	#46
craneboy72 Senior Member Join Date: Jun 2015 Location: Acton Ma Posts: 746	Re: Parting out 71 Cheyenne C20 Can u post a pick of the rear marker lights and a price shipped to 01720?

02-28-2016, 10:47 AM	#47
ranger danger Registered User Join Date: Jan 2015 Location: Vacaville CA Posts: 896	Re: Parting out 71 Cheyenne C20 I sent you a PM on the center link. I'll take it. __________________ 1969 C20 Suburban "Rez Dog" Rebuild America one testicle at a time. US Army 1977-1979 12B Combat Engineer US Navy 1979-1983 Gunners Mate Guns (GMG) NRA Life Member Unrestrained Children in back seats cause Accidents. Unrestrained Accidents in back seats cause Children.

02-28-2016, 12:19 PM	#49
jaybatta Registered User Join Date: Apr 2014 Location: Livingston, MT Posts: 837	Re: Parting out 71 Cheyenne C20 Ok thanks, let me know Joe __________________ Joe 1968 K20 1970 K20 Semper Fi

02-28-2016, 12:25 PM	#50
Tony Woodward Registered User Join Date: Nov 2015 Location: Midland texas Posts: 13	Re: Parting out 71 Cheyenne C20 PM sent

Register or Log In To remove these advertisements.