4D'S "63" GMC Build - Page 20 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

padresag · 06-24-2009, 12:01 PM

Quote:

Originally Posted by MacAttack

Here you go, Joe........

Mac.

that is eye candy for some you know
ron

padresag · 06-24-2009, 12:03 PM

Quote:

Originally Posted by MacAttack

Oh, sorry - is this better?

]

now you see where his true values are. The pictures just got larger
ron

joe231 · 06-24-2009, 12:08 PM

i think you are right...Mac isn't gay!!!

jason65 · 06-24-2009, 12:46 PM

Not again.

4dranch · 06-25-2009, 06:12 AM

Quote:

Originally Posted by jason65

Not again.

I know......Leave it to that grumpy old Canadian..

MacAttack · 06-25-2009, 10:05 AM

Quote:

Originally Posted by joe231

i think you are right...Mac isn't gay!!!

Ha Ha, fooled another one!

4dranch · 06-25-2009, 11:34 AM

joe231 · 06-25-2009, 01:35 PM

4dranch · 07-23-2009, 09:02 AM

Funny story..
I asked Jason or Jason65...a engine question while I was visiting the Oklahoma crowd.

Question was why I was not getting equal amount of exhaust pressure coming out. Jason listened to the motor and gave me some suggestions to try.

Once I returned home and finished up some ranch chores and was just about to tackle this issue Jason sends me a PM.
He wanted me to look and see if I had exhaust tuners at the base of the exhaust manifolds. Once he explained what they were I looked and told him no I didn't see anything.

Well being the bone head that I am I only looked on the driver's side.

I had some time last night to work on the truck a little and desided to look on the other side and duh there was this tuner assembly.

My neighbor came by and said they used these to shut off and use the heat to warm up the motor then they would open them.

Once I remove this I hope it helps out a couple of other problems.

like cab gets warm...
the over heating issues...
And I hope it cures why after you drive the truck you have to wait till it cools down to crank it back up...

You guys probably already know this but it's new to me so I thought I would share....This is why this site is so cool...I will update later.

Thanks Jason,,I owe you some bottled water.

joe231 · 07-23-2009, 09:29 AM

nice find....that bottled water better have some barley and hops in it

MacAttack · 07-23-2009, 09:54 AM

Good catch, David. Had the same issue on the 65' Chevelle rebuild.

Took both of those things (which I guess is really important if you live in up-state New York and you're trying to get to work in January) and threw them as far as I could.

Mac.

jason65 · 07-23-2009, 09:56 AM

I hope it's a cure all for ya.

4dranch · 07-23-2009, 10:03 AM

Quote:

Originally Posted by joe231

nice find....that bottled water better have some barley and hops in it

Nope it's Crystal Clear....

Quote:

Originally Posted by MacAttack

Good catch, David. Had the same issue on the 65' Chevelle rebuild.

Took both of those things (which I guess is really important if you live in up-state New York and you're trying to get to work in January) and threw them as far as I could.

Mac.

Props to Jason,,,,,Yeah I really doubt I'll need them here in the South.......

Quote:

Originally Posted by jason65

I hope it's a cure all for ya.

Me too...Thanks again

Strodder · 07-23-2009, 10:09 AM

Quote:

Originally Posted by jason65

I hope it's a cure all for ya.

Good call Jason.

Another tip is put a cross over pipe before the mufflers will give a little more HP, and Torque.

MacAttack · 07-23-2009, 10:13 AM

Quote:

Originally Posted by 4dranch

Props to Jason,,,,,Yeah I really doubt I'll need them here in the South..

True Dat - but careful, we don't want his head to get too big.

Mac.

4dranch · 07-23-2009, 10:30 AM

Quote:

Originally Posted by Strodder

Good call Jason.

Another tip is put a cross over pipe before the mufflers will give a little more HP, and Torque.

Thanks Dennis

Quote:

Originally Posted by MacAttack

True Dat - but careful, we don't want his head to get too big.

Mac.

Alan's Classic · 07-23-2009, 11:29 PM

Quote:

Originally Posted by MacAttack

True Dat - but careful, we don't want his head to get too big.

Mac.

4dranch · 07-24-2009, 07:52 AM

Took the old tailgate off and swapped out the hook eyes and installed them on the one I got from Morton (283man).

My oldest has started doing some air-brushing and wanted to learn how to tape up a large area so I told her to tape up the logo on the tailgate.....

Nice fitting tailgate thanks Morton.

jbgroby · 07-24-2009, 08:24 AM

Cool, You got your girl working on a truck, That's Great.

joe231 · 07-24-2009, 09:04 AM

nice!!

Strodder · 07-24-2009, 10:26 AM

Lucky guy. You have a helper.

jason65 · 07-24-2009, 12:09 PM

Good lookin tailgate. How were your trunions?

Alan's Classic · 07-24-2009, 12:10 PM

Quote:

Originally Posted by jbgroby

Cool, You got your girl working on a truck, That's Great.

I hope mine take an interest some day.

4dranch · 07-24-2009, 12:38 PM

Quote:

Originally Posted by jbgroby

Cool, You got your girl working on a truck, That's Great.

My youger daughter is always helping....It's cool the 17 year old is showing some interest now.

Quote:

Originally Posted by joe231

nice!!

Thanks Joe

Quote:

Originally Posted by Strodder

Lucky guy. You have a helper.

Yeah till Dad starts throwing tools are making sparks....

Quote:

Originally Posted by jason65

Good lookin tailgate. How were your trunions?

Thanks Jason,
They were in good shape

Quote:

Originally Posted by Alan's Classic

I hope mine take an interest some day.

You get your web cams set up, I thinking you will have plenty of help.....

*highperf4x4* · 07-24-2009, 09:50 PM

Quote:

Originally Posted by jbgroby

Cool, You got your girl working on a truck, That's Great.

Yup and bare knees with no pads or cushions........... That's tough!

06-24-2009, 12:08 PM	#478
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 4D'S "63" GMC Build i think you are right...Mac isn't gay!!! __________________ *CHEVY ONLY* Last edited by joe231; 06-24-2009 at 12:09 PM.

06-24-2009, 12:46 PM	#479
jason65 Registerd User Join Date: Sep 2008 Location: Oklahoma Posts: 2,118	Re: 4D'S "63" GMC Build Not again.

06-25-2009, 11:34 AM	#482
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: 4D'S "63" GMC Build __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

06-25-2009, 01:35 PM	#483
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 4D'S "63" GMC Build __________________ *CHEVY ONLY*

07-23-2009, 09:02 AM	#484
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: 4D'S "63" GMC Build Funny story.. I asked Jason or Jason65...a engine question while I was visiting the Oklahoma crowd. Question was why I was not getting equal amount of exhaust pressure coming out. Jason listened to the motor and gave me some suggestions to try. Once I returned home and finished up some ranch chores and was just about to tackle this issue Jason sends me a PM. He wanted me to look and see if I had exhaust tuners at the base of the exhaust manifolds. Once he explained what they were I looked and told him no I didn't see anything. Well being the bone head that I am I only looked on the driver's side. I had some time last night to work on the truck a little and desided to look on the other side and duh there was this tuner assembly. My neighbor came by and said they used these to shut off and use the heat to warm up the motor then they would open them. Once I remove this I hope it helps out a couple of other problems. like cab gets warm... the over heating issues... And I hope it cures why after you drive the truck you have to wait till it cools down to crank it back up... You guys probably already know this but it's new to me so I thought I would share....This is why this site is so cool...I will update later. Thanks Jason,,I owe you some bottled water. Attached Images __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

07-23-2009, 09:29 AM	#485
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 4D'S "63" GMC Build nice find....that bottled water better have some barley and hops in it __________________ *CHEVY ONLY*

07-23-2009, 09:54 AM	#486
MacAttack 283 Drama Queen Join Date: Dec 2004 Location: Surf City, CA Posts: 2,435	Re: 4D'S "63" GMC Build Good catch, David. Had the same issue on the 65' Chevelle rebuild. Took both of those things (which I guess is really important if you live in up-state New York and you're trying to get to work in January) and threw them as far as I could. Mac. __________________ For about 12 years of my adult life I had a severe speech impediment. My ex-wife never let me get a word in edgewise.

07-23-2009, 09:56 AM	#487
jason65 Registerd User Join Date: Sep 2008 Location: Oklahoma Posts: 2,118	Re: 4D'S "63" GMC Build I hope it's a cure all for ya.

07-24-2009, 07:52 AM	#493
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: 4D'S "63" GMC Build Took the old tailgate off and swapped out the hook eyes and installed them on the one I got from Morton (283man). My oldest has started doing some air-brushing and wanted to learn how to tape up a large area so I told her to tape up the logo on the tailgate..... Nice fitting tailgate thanks Morton. Attached Images __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

07-24-2009, 08:24 AM	#494
jbgroby Registered User Join Date: Nov 2008 Location: Lacombe, LA Posts: 2,770	Re: 4D'S "63" GMC Build Cool, You got your girl working on a truck, That's Great. __________________ http://s1299.photobucket.com/user/jb...23904108567829

07-24-2009, 09:04 AM	#495
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 4D'S "63" GMC Build nice!! __________________ *CHEVY ONLY*

07-24-2009, 10:26 AM	#496
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: 4D'S "63" GMC Build Lucky guy. You have a helper. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

07-24-2009, 12:09 PM	#497
jason65 Registerd User Join Date: Sep 2008 Location: Oklahoma Posts: 2,118	Re: 4D'S "63" GMC Build Good lookin tailgate. How were your trunions?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.