1967 C10 Custom Big Window - Page 21 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

my67chevytruck · 03-15-2010, 10:53 AM

Progress is progress, as long as its on the "Chev-a-dectomy-a-potomous-a-saurus-rex-da-dactile-orangeus-colorus-money-pitacus" , and not the self accelerating one!

Slick67 · 03-15-2010, 07:13 PM

Here are the updates! A couple of pics of progress.
Installed my flywheel and drained my torque converter some so I wouldn't be pouring out trans fluid everywhere.
Name: engineandtrans.jpg
Views: 2353
Size: 30.5 KB

Name: engineandtrans.jpg
Views: 2353
Size: 30.5 KB

Pulled out the dusty transmission and cleaned it up (cleaned and painted months ago) and butted it up to the engine. After 4 trips to the auto supply store I finally got the right trans mount.
Name: engineandtranshookedup.jpg
Views: 2354
Size: 30.7 KB

Name: engineandtranshookedup.jpg
Views: 2354
Size: 30.7 KB

Got it in the frame rails with no problems, only took about 40 minutes. Took my time so I wouldn't scratch the paint! The brake booster is going away and will be replaced with a hydrobooster to clean things up. All was well until I attempted to fit the headers........no fit, back to searching for some shorties.
Name: engineinstalled.jpg
Views: 2303
Size: 40.9 KB

Name: engineinstalled.jpg
Views: 2303
Size: 40.9 KB

Just another pic for your viewing pleasure.
Name: motorinstalled2.jpg
Views: 2343
Size: 43.6 KB

And another. The weight of the engine lowered the front down about an inch so with everything on the front installed it should sit right where I want it. Note the pictures hanging on the back wall of the shop! Also installed the seat so I could do a little imaginary cruising!
Name: motorinstalled.jpg
Views: 2395
Size: 36.8 KB

Name: motorinstalled.jpg
Views: 2395
Size: 36.8 KB

67-C10 · 03-15-2010, 07:34 PM

You have to be itching to drive this. It's looking great. Hopefully ordering my paint this week.

VA72C10 · 03-15-2010, 07:57 PM

Looks great man! Love it. A mix of the new and the old. Great style! Sorry bout the headers....which ones were they?

nuke1 · 03-15-2010, 10:10 PM

Now that is what i am talking about!!!!!!!!!!!!!!!!!!!

**kev2809** · 03-15-2010, 10:58 PM

woot!! thats what i like to see! looks great david

whiteyandreddy · 03-16-2010, 01:26 AM

Looks great! I agree you have to be anxious to drive this truck!

my67chevytruck · 03-16-2010, 07:35 AM

Nice progress David... your getting closer each time.... Imaginary cruizing sounds fun!

Slick67 · 03-16-2010, 08:30 AM

Quote:

Originally Posted by 67-C10

You have to be itching to drive this. It's looking great. Hopefully ordering my paint this week.

Hellz yeah! Thanks. What did ya decide on?

Quote:

Originally Posted by VA72C10

Looks great man! Love it. A mix of the new and the old. Great style! Sorry bout the headers....which ones were they?

Thanks dude! The headers were Gibson for 88 and up, bought them prematurely and didn't do enough research.....lesson learned the hard way.

Quote:

Originally Posted by nuke1

Now that is what i am talking about!!!!!!!!!!!!!!!!!!!

Lookin better, gotta keep up with you!

Quote:

Originally Posted by kev2809

woot!! thats what i like to see! looks great david

Still have so much to do on the engine, HEI, carb, headers, all the pulleys and belts and power steering, alternator.........does it ever end?!?!?!

Quote:

Originally Posted by whiteyandreddy

Looks great! I agree you have to be anxious to drive this truck!

It's killin me.......I am getting really excited, maybe another couple of months.

Quote:

Originally Posted by my67chevytruck

Nice progress David... your getting closer each time.... Imaginary cruizing sounds fun!

Thanks Heath. It has been a long time just to get to this point, but worth it. Glad I slowed down on it to build it like I wanted.

**67cheby** · 03-16-2010, 09:53 AM

Looking Awesome !!!

Slick67 · 03-17-2010, 09:22 AM

Quote:

Originally Posted by 67cheby

Looking Awesome !!!

I appreciate it! Hard work is payin off!

Slick67 · 03-17-2010, 08:13 PM

This pic shows how much the c-notch helped and how low it sits in the rear now. I am almost 5'11'' and the top of the cab sits level with my shoulder. Picture credit goes to my girlfreind Christy.
Name: DSC02738 (Small).JPG
Views: 2523
Size: 82.1 KB

Name: DSC02738 (Small).JPG
Views: 2523
Size: 82.1 KB

Name: DSC02736 (Small).JPG
Views: 2280
Size: 62.9 KB

Name: DSC02735 (Small).JPG
Views: 2270
Size: 61.9 KB

VA72C10 · 03-17-2010, 08:22 PM

Looking great. Yeah, I was loading parts into my bagged longbed (sitting on the bagged frame) and it was so nice to be able to drop them over the side of the bedsides with no problem because it's so low....

VA72C10 · 03-17-2010, 08:28 PM

From no tuck

to tuck

Slick67 · 03-17-2010, 10:11 PM

Quote:

Originally Posted by VA72C10

From no tuck

to tuck

Yeah! You can see I gained.....uh lost at least two inches! Made a big difference with the notches.

my67chevytruck · 03-17-2010, 10:32 PM

nice work David!

**67cheby** · 03-18-2010, 09:51 AM

looking awesome man

nuke1 · 03-18-2010, 02:26 PM

David, your truck makes me jealous, yours is painted and looking good, mine runs but is nowhere near done, if ever! Keep it up, you are doing a great job, btw, I will get you do do a sketch of the camaro, pm you later.

19723DR · 03-18-2010, 06:51 PM

Man! That's looking great! I'm really diggin' the air cleaner.

Slick67 · 03-18-2010, 10:00 PM

Quote:

Originally Posted by 19723DR

Man! That's looking great! I'm really diggin' the air cleaner.

Oh yeah, can't say I have ever seen another so I'm diggin it too!! Thanks bro!!

*Puropedo* · 03-19-2010, 01:06 AM

Man bro, that truck is looking sweeet! I knew the engine scoop mod would look bad ass!...Good job!...

Slick67 · 03-19-2010, 11:34 AM

Quote:

Originally Posted by 67cheby

looking awesome man

Can't wait to gitter done!

Quote:

Originally Posted by nuke1

David, your truck makes me jealous, yours is painted and looking good, mine runs but is nowhere near done, if ever! Keep it up, you are doing a great job, btw, I will get you do do a sketch of the camaro, pm you later.

Ha. Yeah right Nuke, like mine comes close to yours! We'll see how it turns out.

Quote:

Originally Posted by Puropedo

Man bro, that truck is looking sweeet! I knew the engine scoop mod would look bad ass!...Good job!...

Thanks for the compliments! When I have people like you and James and Heath saying that, it must be coming out alright for my first build. That scoop was a true brainfart, but I must say it was a cool idea and I thought it would be original. Gotta figure out a good way to attach it to make it look like it's "floating" on top of the motor.

nuke1 · 03-20-2010, 09:22 AM

David, what are you using for an air cleaner. that will really make or break the bank for mounting it.

Slick67 · 03-20-2010, 05:23 PM

Quote:

Originally Posted by nuke1

David, what are you using for an air cleaner. that will really make or break the bank for mounting it.

I am using a 6.5 inch round Mr. Gasket that I will probably have to cut down about 1 inch (maybe). The scoop is about 2.5 inches from the top to bottom and the cleaner is about 4 inches tall. The scoop is about 14 inches wide. I am thinking of using a little longer stud for my carb and making 2 braces one for the front and back that will hold the scoop just about .25 of an inch above the air cleaner. Bolting it to the carb studs should be sturdy and installing and removing should not be too hard.

mcbassin · 03-20-2010, 08:56 PM

Looking good! You'll be on the road in no time.

03-15-2010, 10:53 AM	#501
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: 1967 C10 Custom Big Window Progress is progress, as long as its on the "Chev-a-dectomy-a-potomous-a-saurus-rex-da-dactile-orangeus-colorus-money-pitacus" , and not the self accelerating one! __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

03-15-2010, 07:13 PM	#502
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: 1967 C10 Custom Big Window Here are the updates! A couple of pics of progress. Installed my flywheel and drained my torque converter some so I wouldn't be pouring out trans fluid everywhere. Pulled out the dusty transmission and cleaned it up (cleaned and painted months ago) and butted it up to the engine. After 4 trips to the auto supply store I finally got the right trans mount. Got it in the frame rails with no problems, only took about 40 minutes. Took my time so I wouldn't scratch the paint! The brake booster is going away and will be replaced with a hydrobooster to clean things up. All was well until I attempted to fit the headers........no fit, back to searching for some shorties. Just another pic for your viewing pleasure. And another. The weight of the engine lowered the front down about an inch so with everything on the front installed it should sit right where I want it. Note the pictures hanging on the back wall of the shop! Also installed the seat so I could do a little imaginary cruising! __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed" Last edited by Slick67; 03-16-2010 at 08:18 AM.

03-15-2010, 07:34 PM	#503
67-C10 Registered User Join Date: Jul 2008 Location: Taunton, MA Posts: 224	Re: 1967 C10 Custom Big Window You have to be itching to drive this. It's looking great. Hopefully ordering my paint this week. __________________ 67 C10 2wd Stepside (to be fleetside), Factory AC truck, Big Back Window, just got a 6.0/6l90e to jam in it now..... Needed: paint and lots of it. and i'm sure lots more misc. parts. Project 67 short step Build Thread 01 Sierra Crew 6.0 2015 Ford F150 Work gave me truck i really wouldn't buy a ford.

03-15-2010, 07:57 PM	#504
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 1967 C10 Custom Big Window Looks great man! Love it. A mix of the new and the old. Great style! Sorry bout the headers....which ones were they? __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-15-2010, 10:10 PM	#505
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: 1967 C10 Custom Big Window Now that is what i am talking about!!!!!!!!!!!!!!!!!!! __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

03-15-2010, 10:58 PM	#506
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,143	Re: 1967 C10 Custom Big Window woot!! thats what i like to see! looks great david __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

03-16-2010, 01:26 AM	#507
whiteyandreddy Registered User Join Date: Jan 2010 Location: Erie, CO Posts: 83	Re: 1967 C10 Custom Big Window Looks great! I agree you have to be anxious to drive this truck!

03-16-2010, 07:35 AM	#508
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: 1967 C10 Custom Big Window Nice progress David... your getting closer each time.... Imaginary cruizing sounds fun! __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

03-16-2010, 09:53 AM	#510
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 1967 C10 Custom Big Window Looking Awesome !!! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

03-17-2010, 08:13 PM	#512
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: 1967 C10 Custom Big Window This pic shows how much the c-notch helped and how low it sits in the rear now. I am almost 5'11'' and the top of the cab sits level with my shoulder. Picture credit goes to my girlfreind Christy. __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

03-17-2010, 08:22 PM	#513
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 1967 C10 Custom Big Window Looking great. Yeah, I was loading parts into my bagged longbed (sitting on the bagged frame) and it was so nice to be able to drop them over the side of the bedsides with no problem because it's so low.... __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-17-2010, 08:28 PM	#514
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 1967 C10 Custom Big Window From no tuck to tuck __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-17-2010, 10:32 PM	#516
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: 1967 C10 Custom Big Window nice work David! __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

03-18-2010, 09:51 AM	#517
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 1967 C10 Custom Big Window looking awesome man __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

03-18-2010, 02:26 PM	#518
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: 1967 C10 Custom Big Window David, your truck makes me jealous, yours is painted and looking good, mine runs but is nowhere near done, if ever! Keep it up, you are doing a great job, btw, I will get you do do a sketch of the camaro, pm you later. __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587



Register or Log In To remove these advertisements.

03-18-2010, 06:51 PM	#519
19723DR Registered User Join Date: Oct 2007 Location: Salt Lake City Posts: 628	Re: 1967 C10 Custom Big Window Man! That's looking great! I'm really diggin' the air cleaner. __________________ 72 Suburban 3 Door http://67-72chevytrucks.com/vboard/s...d.php?t=265728 family fun cruiser 71 Cheyenne Project http://67-72chevytrucks.com/vboard/s...d.php?t=299232 Almost finished 93 Silverado http://www.67-72chevytrucks.com/vboa...d.php?t=378258 Flamed, bagged, body dropped on 22's 98 Chevy short bed DD 97 Z71 3 Door 51 Suburban-S-10 swap "What other hot rod can you carry 7 of your friends in"

03-19-2010, 01:06 AM	#521
Puropedo Account Suspended Join Date: Nov 2008 Location: Prunedale California Posts: 782	Re: 1967 C10 Custom Big Window Man bro, that truck is looking sweeet! I knew the engine scoop mod would look bad ass!...Good job!...

03-20-2010, 09:22 AM	#523
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: 1967 C10 Custom Big Window David, what are you using for an air cleaner. that will really make or break the bank for mounting it. __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

03-20-2010, 08:56 PM	#525
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: 1967 C10 Custom Big Window Looking good! You'll be on the road in no time. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

Register or Log In To remove these advertisements.