71 4X4 Frame off Restoration

[swamp rat]

Originally Posted by DWilbur

After lunch we found some low profile tires walking by a tire shop for free so I can put my 17" wheel on and get the cab to fit in the garage. With the 17" wheel I can install my brake calipers on the front.

Whats the plan when its done? 33's? 35's?

Gotta feel good getting the cab on that frame!

[7dee2]

Looks really good! That is a tight fit in the garage!

[cmabolt]

Well Congrats!!! Huge milestone. If I remember correctly, it went a lot faster once I started getting body parts back on the frame to finish mock-up.

Keep at it and good luck.
Chris

[First c10]

Hey David at least 1 of us are able to work on there trucks. Keep it up!!! Can't wait to see it.
Scott

[Dieselwrencher]

I wish you luck on the trans install again man!

[DWilbur]

Thank deiselwrencher
We have it installed but my nephew lost one of the U-joint cups and that caused a lot of problems. For some reason this car does not want to be saved from the junk yard. I'm going to keep trying to get it back on the road I can't give up on it.
Hello Scott
I have not done much work on my truck like I would like to but things will change now that I'm working normal work shift and I have my week ends back I will be able to spend more time on the truck.

[Mr. D]

Sorry for the delayed reply Dave.
I hate when work get's in the way of my hobby!

Good to see you're still making some progress! Albeit slow; progress is progress!

Regarding the sunroof patch, yes, I have a wire feed welder (I'm just not very good with it!) Some weekend day would work best whenever you have time.
I have a tarp over the opening for now.

LMK when you have some time to spare. You have my #.

Many thanks,

[DWilbur]

Originally Posted by Mr. D

Sorry for the delayed reply Dave.
I hate when work get's in the way of my hobby!

Good to see you're still making some progress! Albeit slow; progress is progress!

Regarding the sunroof patch, yes, I have a wire feed welder (I'm just not very good with it!) Some weekend day would work best whenever you have time.
I have a tarp over the opening for now.

LMK when you have some time to spare. You have my #.

Many thanks,

I'm working on my car Saturday not sure about sunday. Next week end would be better. your welder is just wire fed or mig with argon/ co2.

[Mr. D]

Just wire fed, not Mig.
Next weekend should be fine.

Thanks again

[DWilbur]

Well We managed to get my car running barely. I did drive it around the block. it died 3 time by the time I got back to the shop. Then the shifter cable melted to the header and so the issues continue. At least I had a smile on my face as I was driving. Now back to the truck. I picked up my 17" wheels with 40 series tires so the cab should fit on the frame and in the garage. This week end I plan to install my brake calipers and plan for brake lines.

[DWilbur]

Check out this red neck bathroom. Actually it's a picture from work.

[ole dollor]

Originally Posted by DWilbur

Check out this red neck bathroom. Actually it's a picture from work.

Can you say Mr. clean...

[DWilbur]

Finally got my low profile tires mounted. The wheels are 17" and my front brake calipers now fit. It's a low rider with 6" lift.

[Vova]

Originally Posted by DWilbur

Finally got my low profile tires mounted. The wheels are 17" and my front brake calipers now fit. It's a low rider with 6" lift.

It's the perfect look for East Side SJ.

[Dieselwrencher]

I have been hearing there's a real water shortage there in Ca. Sorry to hear about your car. But, at least a trans works in it now! You forgot to drop your bags on your low rider. Haha

[DWilbur]

Water shortage big time. We where to have rain today but I could have pissed on the ground and made a bigger puddle. my front lawn is just dirt now even the dead grass blew away.

[mud.man.rj]

You can have our water, except it in the form of snow already, we do like to share, even give it away..guess that's why it is called the Great white North.

[DWilbur]

Not much work done on the truck in the last couple weeks. Stopped by body shop and paid for some bodywork. should be picking up the cab in about 2 weeks.
I did work on 8-3/4" rear end for my car this week end media blasting it getting the 1/2" grime off so I can rebuild it with a locker and disc breaks.

[First c10]

Originally Posted by DWilbur

Not much work done on the truck in the last couple weeks. Stopped by body shop and paid for some bodywork. should be picking up the cab in about 2 weeks.
I did work on 8-3/4" rear end for my car this week end media blasting it getting the 1/2" grime off so I can rebuild it with a locker and disc breaks.

I hear ya! I am trying to get back on the metal work of my cab. I Cant wait till I can turn it over to a body guy.... Body work is not my thing!!!

Keep us posted!!!

[DWilbur]

I received a call this morning that my cab is ready to pick up Saturday. I will post some pictures Saturday. picked up some break line tubing and flaring tool yesterday so I can start that as well.

[Mr. D]

Nice!
Congrats Dave!

[First c10]

Originally Posted by DWilbur

I received a call this morning that my cab is ready to pick up Saturday. I will post some pictures Saturday. picked up some break line tubing and flaring tool yesterday so I can start that as well.

Nice!!!

[Dieselwrencher]

Awesome! An early Christmas to ya! Sort of.

[DWilbur]

I picked up my cab today an early Christmas present. My nephew stopped by and helped me set it on the frame. Had to pull the bed off then set the cab on then put the bed back on. it just fit in the garage door with 1" to clear. It looks like the T-case shift levers will fit with out any modification. Got lucky there. This is the first time the cab has been on the frame with the running gear installed. Next step fit the seat, 2004 steering column, break and clutch peddles.

[71blksuper4x4]

Looks good! Got to be a great feeling!