Boyd Welding-67-72 Rear Mount Aluminum Tank - Page 23 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Joemomma1 · 11-29-2011, 12:26 AM

Subscribed. I can wait untill the next group buy.

effects66 · 12-07-2011, 05:36 PM

Quote:

Originally Posted by Daveboyd

Sooooo If we were to make revisions to this current tank. Does anyone have any suggestions? Can be anything. Structure, pump options, Cap options. Please PM me any suggestions.

-dave

Probably the biggest thing I can think of would be pump options. A standard and more HP pump. My engine puts out 550 and I would have to upgrade the pump for more flow to properly fuel my engine.

**Daveboyd** · 12-10-2011, 11:35 PM

Quote:

Originally Posted by effects66

Probably the biggest thing I can think of would be pump options. A standard and more HP pump. My engine puts out 550 and I would have to upgrade the pump for more flow to properly fuel my engine.

a while back we changed our standard EFI pump to the aeromotive stealth 340. That pump will support that HP no Problem.

We are currently finishing a new tank with the A1000 which will be ready to sell in the next week. This tank will be good to 1200 HP.

effects66 · 12-14-2011, 01:47 AM

Quote:

Originally Posted by Daveboyd

a while back we changed our standard EFI pump to the aeromotive stealth 340. That pump will support that HP no Problem.

We are currently finishing a new tank with the A1000 which will be ready to sell in the next week. This tank will be good to 1200 HP.

Very nice. I guess I should have just read a little bit closer. Great.

srea76 · 12-16-2011, 01:27 PM

I bought a 72 blazer tank repo and was planing on plumbing it to my taillight or marker light. Since that time I feel it would just be easier to cut the bed floor and go straight up with one of these tanks. Anyone have pictures of how they have plumbed these tanks. Thanks!

Also do these come with sending unit etc to work on a 72?

automagic67 · 01-15-2012, 11:45 PM

What material is everyone making their fuel lines out of? I want to run hard lines but the cheapest is steel which has a chance to corrode the aluminum tank, I could use aluminum but some say it can crack under vibration, or stainless which is spendy and I have heard it can be difficult to work with. Anybody have any input?

darthwall · 01-15-2012, 11:55 PM

I did brass fittings off the tank with a coated steel line hard line the whole system in 3/8" complete with return line off the preasure regulator worked out real nice. SS is nice but you will probably have to get someone to do the flaring for the fittings
Posted via Mobile Device

nomrlz · 01-16-2012, 09:05 PM

is there a coupon code for forum members? i may be lookin to get a tank for my kids 66 LWB with side exit, ROV and sender and shows $802 shipped

**Clyde65** · 01-17-2012, 01:55 PM

Wait a bit if you can, David usually does a Group Buy in Spring. not sure when tho. He also give us members an all the time 10% ( I think) off. call him and ask him to make sure though

austin60c10 · 01-19-2012, 12:53 PM

Hello all, has anyone put one of these in a 60-62? I'm planning to order soon and wondered what measurements you gave him or if you just got the standard tank and made brackets I know my frame is about 4 inches wider than a 63-72. I thought I ran across someones plans for a 62 but can't find it now

**Clyde65** · 01-21-2012, 01:28 PM

You can contact David and he will make it as wide as you want it, just give him the dimensions/drawing.

lownslw64 · 02-03-2012, 01:24 PM

suscribed, waiting for the group buy. need a efi tank for a 64 swb.

todd99 · 02-09-2012, 01:04 AM

Hi Boyd,

I am looking to upgrade my 71' longhorn with a new fuel tank and I would like a quote. I am running efi with an external pump. How much would a tank cost that I could mount between the frame rails? Would it come with a sender (with a return line)? How much without a sender? And how long would it take to manufacture?

Thanks,

-Chris

*six-T-seven* · 02-09-2012, 01:34 PM

Subscribing for next group buy. Need a standard tank with a center fill.

nibs · 02-11-2012, 12:07 PM

Also in for a group buy!

c10seconds · 02-12-2012, 03:33 PM

I need a tank as well. How about a group buy!!!!

nibs · 02-12-2012, 03:57 PM

Dang! I already see 7 people on for a group buy... I think its time Boyd!

**rob32472** · 02-12-2012, 07:32 PM

In for a group buy!

austin60c10 · 02-13-2012, 10:04 AM

I'm in too 1960 non efi side fill whenever the group buy starts.

Portmod7 · 02-13-2012, 11:00 AM

Yep, group buy. EFI top-fill for me.

MudBug · 02-14-2012, 10:09 AM

I can be in for a group buy

scott72 · 02-14-2012, 02:13 PM

I'm in for group buy.

Non-efi, bed fill, ROV and 90 ohm sender set-up.

effects66 · 02-16-2012, 12:56 AM

GROUP BUY - Im in!!!

todd99 · 02-18-2012, 09:57 AM

That's 13. Where's Boyd?

todd99 · 02-18-2012, 10:02 AM

Just sent Boyd a message on his website letting him know that we are all waiting patiently.

11-29-2011, 12:26 AM	#551
Joemomma1 Registered User Join Date: Mar 2009 Location: CA Posts: 813	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Subscribed. I can wait untill the next group buy.

12-16-2011, 01:27 PM	#555
srea76 Registered User Join Date: Nov 2009 Location: Hazlehurst, Ga. Posts: 822	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I bought a 72 blazer tank repo and was planing on plumbing it to my taillight or marker light. Since that time I feel it would just be easier to cut the bed floor and go straight up with one of these tanks. Anyone have pictures of how they have plumbed these tanks. Thanks! Also do these come with sending unit etc to work on a 72? __________________ 1972 Custom Deluxe LT1 Gen V Swap "Green Lantern" 1984 Silverado Red Baron-72 c10 Project

01-15-2012, 11:45 PM	#556
automagic67 Registered User Join Date: Apr 2007 Location: Las Vegas Nv Posts: 21	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank What material is everyone making their fuel lines out of? I want to run hard lines but the cheapest is steel which has a chance to corrode the aluminum tank, I could use aluminum but some say it can crack under vibration, or stainless which is spendy and I have heard it can be difficult to work with. Anybody have any input?

01-15-2012, 11:55 PM	#557
darthwall Registered User Join Date: Mar 2010 Location: washington Posts: 274	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I did brass fittings off the tank with a coated steel line hard line the whole system in 3/8" complete with return line off the preasure regulator worked out real nice. SS is nice but you will probably have to get someone to do the flaring for the fittings Posted via Mobile Device

01-16-2012, 09:05 PM	#558
nomrlz Registered User Join Date: Jan 2010 Location: Wataga,IL Posts: 666	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank is there a coupon code for forum members? i may be lookin to get a tank for my kids 66 LWB with side exit, ROV and sender and shows $802 shipped

01-17-2012, 01:55 PM	#559
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,540	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Wait a bit if you can, David usually does a Group Buy in Spring. not sure when tho. He also give us members an all the time 10% ( I think) off. call him and ask him to make sure though __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

01-19-2012, 12:53 PM	#560
austin60c10 Registered User Join Date: Jan 2012 Location: Manhattan Ks Posts: 88	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Hello all, has anyone put one of these in a 60-62? I'm planning to order soon and wondered what measurements you gave him or if you just got the standard tank and made brackets I know my frame is about 4 inches wider than a 63-72. I thought I ran across someones plans for a 62 but can't find it now

01-21-2012, 01:28 PM	#561
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,540	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank You can contact David and he will make it as wide as you want it, just give him the dimensions/drawing. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

02-03-2012, 01:24 PM	#562
lownslw64 Registered User Join Date: Feb 2009 Location: Middleton, Idaho Posts: 235	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank suscribed, waiting for the group buy. need a efi tank for a 64 swb. __________________ 1963 Chevy suburban, ls1/4l60e, 3 rows, barn doors 2007 chevy 2500 hd 4x4 duramax

02-09-2012, 01:04 AM	#563
todd99 Registered User Join Date: Feb 2011 Location: prescott, az Posts: 225	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Hi Boyd, I am looking to upgrade my 71' longhorn with a new fuel tank and I would like a quote. I am running efi with an external pump. How much would a tank cost that I could mount between the frame rails? Would it come with a sender (with a return line)? How much without a sender? And how long would it take to manufacture? Thanks, -Chris __________________ 1971 C20 Longhorn Custom Camper

02-09-2012, 01:34 PM	#564
six-T-seven Account Suspended Join Date: Jan 2012 Location: Here and There. Posts: 100	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Subscribing for next group buy. Need a standard tank with a center fill.

02-11-2012, 12:07 PM	#565
nibs JRods Garage Join Date: Dec 2009 Location: East Highland, CA Posts: 1,098	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Also in for a group buy! __________________ Orange Julius-My dropmember'd, LS'd, SWB street machine...

02-12-2012, 03:33 PM	#566
c10seconds Registered User Join Date: Oct 2009 Location: gilbert,AZ Posts: 947	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I need a tank as well. How about a group buy!!!!

02-12-2012, 03:57 PM	#567
nibs JRods Garage Join Date: Dec 2009 Location: East Highland, CA Posts: 1,098	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Dang! I already see 7 people on for a group buy... I think its time Boyd! __________________ Orange Julius-My dropmember'd, LS'd, SWB street machine...

02-12-2012, 07:32 PM	#568
rob32472 Registered User Join Date: May 2007 Location: dallas ga Posts: 1,503	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank In for a group buy!



Register or Log In To remove these advertisements.

02-13-2012, 10:04 AM	#569
austin60c10 Registered User Join Date: Jan 2012 Location: Manhattan Ks Posts: 88	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I'm in too 1960 non efi side fill whenever the group buy starts.

02-13-2012, 11:00 AM	#570
Portmod7 Registered User Join Date: Dec 2004 Location: Aztec, NM Posts: 388	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Yep, group buy. EFI top-fill for me.

02-14-2012, 10:09 AM	#571
MudBug Registered User Join Date: Jan 2007 Location: tennessee Posts: 159	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I can be in for a group buy

02-14-2012, 02:13 PM	#572
scott72 Registered User Join Date: Oct 2009 Location: Bayfield, CO Posts: 187	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I'm in for group buy. Non-efi, bed fill, ROV and 90 ohm sender set-up.

02-16-2012, 12:56 AM	#573
effects66 Registered User Join Date: Dec 2008 Location: San Jose Posts: 206	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank GROUP BUY - Im in!!!

02-18-2012, 09:57 AM	#574
todd99 Registered User Join Date: Feb 2011 Location: prescott, az Posts: 225	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank That's 13. Where's Boyd? __________________ 1971 C20 Longhorn Custom Camper

02-18-2012, 10:02 AM	#575
todd99 Registered User Join Date: Feb 2011 Location: prescott, az Posts: 225	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Just sent Boyd a message on his website letting him know that we are all waiting patiently. __________________ 1971 C20 Longhorn Custom Camper

Register or Log In To remove these advertisements.