72 k20 project - Page 24 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Dieselwrencher** · 05-10-2013, 03:20 PM

Nice work! I need a fancy machine toy too.

dfairchild19 · 05-10-2013, 03:30 PM

Quote:

Originally Posted by ryanroo

we already have about 4 guys and the owner who can operate it, so you are welcome to try, but i dunno if they'll bite. right now its more of a toy than a money maker. i assume that will change as we get better at programming and all that. they were looking at new 3D software yesterday, so who knows.

both turbos are internally gated. i will be blocking off the internal passages for the gates in one way or another. most likely i will be tapping the ports and using a pipe plug. depending on how this set up runs and if i feel like it will spool with it, i may step up to a 14cm exhuast housing on the 35. they are not internally gated, so i will be ready for that. according to my friends at low budget diesel, i probably will not need a gate fro the primary. if i do, it will be an easy add on. the gate on the secondary will dump into the hotpipe to help drive the primary.

There's nothing like having a waterjet at your disposal......

ryanroo · 05-12-2013, 09:04 PM

Quote:

Originally Posted by dfairchild19

There's nothing like having a waterjet at your disposal......

Very true

ryanroo · 05-12-2013, 09:11 PM

i planned to get a little more done this weekend, but i ended up doing a bunch of other stuff, including cleaning my messy garage.

but i did get the frame notched and plated back in for the compressor housing. i may need to buy another pro-werks donut for the turbo to turbo boost tube. the hot pipe donut is supposed to ship this week, so i can do that. i also need to make a plate for the charge pipe on the intake so i can look at that.

i know this is a bit of a repeat, but i really like looking at twins

**Dieselwrencher** · 05-13-2013, 03:30 PM

Very nice! Enjoy iy because I can only see one turbo on mine still.

1985-GMC · 05-13-2013, 11:59 PM

Man that looks so awesome, I love that plate you made!

ryanroo · 05-21-2013, 08:20 PM

Quote:

Originally Posted by 1985-GMC

Man that looks so awesome, I love that plate you made!

Thanks!

i had a long weekend out of town, but i did manage to piddle a little before i left on friday and again a little this afternoon.

i need to pick up a short length of 3" strait tube. the leg on the other half of this u isn't long enough. then i can run it down to the I/C and then ill need to order das boot.

ill take this stuff in to work to Tig weld it this week sometime. hopefully my a/c bracket will come from my Iowa friends this week or next, and i can start on the other piping.

**DeadheadNM** · 05-21-2013, 09:32 PM

Lookin' good....don't forget to add oil to the motor before firing it up for the first time

**Dieselwrencher** · 05-21-2013, 10:50 PM

Nice work Ryan! You have a lot more room than I do so far.

Mattman2010 · 05-21-2013, 11:57 PM

Nice work Ryan! That's going to be sweet!
Posted via Mobile Device

1985-GMC · 05-22-2013, 12:01 AM

Awesome! It looks like you have room for one more... lol
Posted via Mobile Device

ryanroo · 05-22-2013, 10:17 PM

Thanks guys!

so i received a part today

the C stands for cash, as in all of it

the water neck will be tight, but i can make it happen

here it is with the incredibly nasty dodge compressor. it looks like the inlet for the primary will have to be a little on the stupid side, but i guess i can work with it. for any swap where the compounds or the oem single are in the oem position and you have oil filter relocate kit, this water inlet bracket would be fantastic for frame clearance. since my turbos are forward, i get stuck with annoying.

also got the hotpipe welded

jbclassix · 05-22-2013, 10:27 PM

Still studying your fabrication and engineering! Lovin it!

**Dieselwrencher** · 05-22-2013, 10:56 PM

Nice welding! Dang, I wonder what those oil filter relcating things look like.

I'm surprised the Dodge sanden compressor fit on that inlet too. Very nice though.

ryanroo · 05-22-2013, 11:17 PM

i have read that they wont, but i saw mosesburbs and it had the stocker on it... so i ordered it and figured i would see. this compressor is cooked, so i may look into the F-800 one that has the more compact outlets.

relocation kits... yeah....

mosesburb · 05-23-2013, 12:54 AM

Quote:

Originally Posted by ryanroo

i have read that they wont, but i saw mosesburbs and it had the stocker on it... so i ordered it and figured i would see. this compressor is cooked, so i may look into the F-800 one that has the more compact outlets.

If you are referring to the a/c compressor, mine is not a Dodge unit. It is a Freightliner application. The exact application escapes me right now, but I can check the file of doom for the invoice if you need the number on it.

ryanroo · 05-23-2013, 07:51 AM

possibly, i think i have the number for either an FLsomething or F-800 saved on the computer right now. for some reason i thought the mounting base dimensions where different on the MD compressors. im glad i have options though!

**Dieselwrencher** · 05-23-2013, 03:06 PM

Ryan, I may have an inlet that bends around and points down from a 4BT that may fit your situation. I will see if I can locate it.

ryanroo · 05-23-2013, 11:27 PM

Thanks man!

71'4wdK10 · 05-24-2013, 09:05 PM

Poly will last longer and more "High Tech and pricey", however rubber will help more with any vibration and ride.

sboris · 05-26-2013, 01:57 PM

Dude this fab work and engineering is impressive. Way beyond me! I'm lucky to be able to just put it back together the way it was!! Can't wait to see this finished..
Posted via Mobile Device

ryanroo · 05-28-2013, 11:29 PM

Thanks!

a little sneak peak at what happens when i run out of mandrel bends for turbo piping.

Mattman2010 · 05-28-2013, 11:33 PM

That bumper looks sweet! That's close to what I want to do on mine.
Posted via Mobile Device

**Dieselwrencher** · 05-28-2013, 11:48 PM

Very nice work on the bumper Ryan!

mcmlxix · 05-29-2013, 12:02 AM

That bumper is horrible,, send it to me and I'll get rid of it for ya.....

05-10-2013, 03:20 PM	#576
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: 72 k20 project Nice work! I need a fancy machine toy too. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

05-12-2013, 09:11 PM	#579
ryanroo Senior Member Join Date: Apr 2004 Location: sw colorado Posts: 2,720	Re: 72 k20 project i planned to get a little more done this weekend, but i ended up doing a bunch of other stuff, including cleaning my messy garage. but i did get the frame notched and plated back in for the compressor housing. i may need to buy another pro-werks donut for the turbo to turbo boost tube. the hot pipe donut is supposed to ship this week, so i can do that. i also need to make a plate for the charge pipe on the intake so i can look at that. i know this is a bit of a repeat, but i really like looking at twins __________________ 72 K20 12v build 72 K20 "parts truck" A place for your diesel swap questions

05-13-2013, 03:30 PM	#580
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: 72 k20 project Very nice! Enjoy iy because I can only see one turbo on mine still. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

05-13-2013, 11:59 PM	#581
1985-GMC Chevy Enthusiast Join Date: Jul 2009 Location: Canyon Lake Texas Posts: 2,024	Re: 72 k20 project Man that looks so awesome, I love that plate you made! __________________ Tony 1985 GMC K2500 restoration Project: Rust, White & Blue 1989 Chevy R3500 CC Cummins & 4X4 swap some day... 1989 Burb (D60, 14BFF, 12V, NV4500, NP205, 37" tires in progress)

05-21-2013, 09:32 PM	#583
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,320	Re: 72 k20 project Lookin' good....don't forget to add oil to the motor before firing it up for the first time __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

05-21-2013, 10:50 PM	#584
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: 72 k20 project Nice work Ryan! You have a lot more room than I do so far. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

05-21-2013, 11:57 PM	#585
Mattman2010 Registered User Join Date: Jun 2010 Location: Pittsburg, KS Posts: 953	Re: 72 k20 project Nice work Ryan! That's going to be sweet! Posted via Mobile Device __________________ 1980 K10 - 6.2L Diesel/SM465/NP205 Build Thread 1984 K30 CC Dually - "The Tank" 12V Cummins/Nv4500/Np205/D60/D70HD 4" lift & 37's Build Thread 1960 C-60 Dump Truck Make it road worthy! Thread

05-22-2013, 12:01 AM	#586
1985-GMC Chevy Enthusiast Join Date: Jul 2009 Location: Canyon Lake Texas Posts: 2,024	Re: 72 k20 project Awesome! It looks like you have room for one more... lol Posted via Mobile Device __________________ Tony 1985 GMC K2500 restoration Project: Rust, White & Blue 1989 Chevy R3500 CC Cummins & 4X4 swap some day... 1989 Burb (D60, 14BFF, 12V, NV4500, NP205, 37" tires in progress)

05-22-2013, 10:17 PM	#587
ryanroo Senior Member Join Date: Apr 2004 Location: sw colorado Posts: 2,720	Re: 72 k20 project Thanks guys! so i received a part today the C stands for cash, as in all of it the water neck will be tight, but i can make it happen here it is with the incredibly nasty dodge compressor. it looks like the inlet for the primary will have to be a little on the stupid side, but i guess i can work with it. for any swap where the compounds or the oem single are in the oem position and you have oil filter relocate kit, this water inlet bracket would be fantastic for frame clearance. since my turbos are forward, i get stuck with annoying. also got the hotpipe welded __________________ 72 K20 12v build 72 K20 "parts truck" A place for your diesel swap questions

05-22-2013, 10:27 PM	#588
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: 72 k20 project Still studying your fabrication and engineering! Lovin it! __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205

05-22-2013, 10:56 PM	#589
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: 72 k20 project Nice welding! Dang, I wonder what those oil filter relcating things look like. I'm surprised the Dodge sanden compressor fit on that inlet too. Very nice though. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

05-22-2013, 11:17 PM	#590
ryanroo Senior Member Join Date: Apr 2004 Location: sw colorado Posts: 2,720	Re: 72 k20 project i have read that they wont, but i saw mosesburbs and it had the stocker on it... so i ordered it and figured i would see. this compressor is cooked, so i may look into the F-800 one that has the more compact outlets. relocation kits... yeah.... __________________ 72 K20 12v build 72 K20 "parts truck" A place for your diesel swap questions

05-23-2013, 07:51 AM	#592
ryanroo Senior Member Join Date: Apr 2004 Location: sw colorado Posts: 2,720	Re: 72 k20 project possibly, i think i have the number for either an FLsomething or F-800 saved on the computer right now. for some reason i thought the mounting base dimensions where different on the MD compressors. im glad i have options though! __________________ 72 K20 12v build 72 K20 "parts truck" A place for your diesel swap questions

05-23-2013, 03:06 PM	#593
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: 72 k20 project Ryan, I may have an inlet that bends around and points down from a 4BT that may fit your situation. I will see if I can locate it. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

05-23-2013, 11:27 PM	#594
ryanroo Senior Member Join Date: Apr 2004 Location: sw colorado Posts: 2,720	Re: 72 k20 project Thanks man! __________________ 72 K20 12v build 72 K20 "parts truck" A place for your diesel swap questions



Register or Log In To remove these advertisements.

05-24-2013, 09:05 PM	#595
71'4wdK10 Registered User Join Date: May 2013 Location: Braselton, Ga. Posts: 40	Re: 72 k20 project Poly will last longer and more "High Tech and pricey", however rubber will help more with any vibration and ride.

05-26-2013, 01:57 PM	#596
sboris Registered User Join Date: Jun 2011 Location: Osceola, Ia Posts: 2,016	Re: 72 k20 project Dude this fab work and engineering is impressive. Way beyond me! I'm lucky to be able to just put it back together the way it was!! Can't wait to see this finished.. Posted via Mobile Device __________________ Shawn 68 chevy K/20 05 chevy 3/4 4x4 71 short step-sold 71 chevy Beauville van My build. http://67-72chevytrucks.com/vboard/s...d.php?t=633039

05-28-2013, 11:29 PM	#597
ryanroo Senior Member Join Date: Apr 2004 Location: sw colorado Posts: 2,720	Re: 72 k20 project Thanks! a little sneak peak at what happens when i run out of mandrel bends for turbo piping. __________________ 72 K20 12v build 72 K20 "parts truck" A place for your diesel swap questions

05-28-2013, 11:33 PM	#598
Mattman2010 Registered User Join Date: Jun 2010 Location: Pittsburg, KS Posts: 953	Re: 72 k20 project That bumper looks sweet! That's close to what I want to do on mine. Posted via Mobile Device __________________ 1980 K10 - 6.2L Diesel/SM465/NP205 Build Thread 1984 K30 CC Dually - "The Tank" 12V Cummins/Nv4500/Np205/D60/D70HD 4" lift & 37's Build Thread 1960 C-60 Dump Truck Make it road worthy! Thread

05-28-2013, 11:48 PM	#599
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: 72 k20 project Very nice work on the bumper Ryan! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

05-29-2013, 12:02 AM	#600
mcmlxix Collector of Projects Join Date: Apr 2003 Location: Las Vegas Posts: 3,106	Re: 72 k20 project That bumper is horrible,, send it to me and I'll get rid of it for ya..... __________________ Rich 1972 K5 Blazer CST Click HERE D60 BIG BRAKE UPGRADE Click HERE

Register or Log In To remove these advertisements.