slik ricks 67 short wide CST - Page 25 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67chevy1series · 01-15-2011, 04:54 PM

well yesterday i went to bed and it came to me ,i figured out a way to make a 67 air cleaner breath better and still look stock with out drilin holes in it!

oldblue1968chevy · 01-15-2011, 04:59 PM

^LMAO^^ ahahaha

Where did those pictures come from lol...

And whatcha gonna do witht he old cig. lighter?..I dunno if imma put 1 in my truck or not, it'd have to match my knobs and i hae my choke there now..

67chevy1series · 01-15-2011, 05:01 PM

john i have somthin that all you need to do is install it and plug it in ad you will have cigarette lighter i am selling it for 10 bucks

oldblue1968chevy · 01-15-2011, 05:22 PM

Thats a pretty good deal, but Imma hang on for a lil longer at least. The cig hole is a good place for my man. choke right now and I dont smoke/need a cig. lighter port. I'll letcha know if I change my mind, is that $10 shipped lol

67chevy1series · 01-15-2011, 06:37 PM

well i drilled the holes it came out okay ! i will put up pics in a sec!

67chevy1series · 01-15-2011, 06:41 PM

i still need to primer and paint it ! but here it is i am pleased with the results looks clean!

oldblue1968chevy · 01-15-2011, 06:54 PM

It really cleans things up under there (gear for PB)

Looks good, where'd all the dents come from

Where did you score all the stuff? Tilt etc??! Are you spraypainting stuff or real painting or what? How is it?

67chevy1series · 01-15-2011, 07:03 PM

this is rattle can jobs!lol the tilt was givin to me by my dad because he junked his 68 suburban and i needed a colum so there it was! well the colum comes from a van and i am actually not liking it very much! if i find a 70 72 tilt colum for like 100 bucks im going to buy it and sell my tilt for 100 lol

oldblue1968chevy · 01-15-2011, 07:14 PM

Whats wrong with it? I couldnt tell? Id find one and rebuild relube the insides.

I wanna build a truck from the frame up. Make the frame nice and pretty all the suspension nice and pretty, uh my rusty greasy frame bothers me...

Anyways..

67chevy1series · 01-15-2011, 07:17 PM

well it hangs too low , you know in the fire wall the end of the colum has to bumps on it and the bracket goes on those bumps well on my colum the bumps are like 4 inches farther down and if i pull the colum up it will stick to far in and the rod will not attach so that is what i dont like

67chevy1series · 01-15-2011, 08:13 PM

well i have just drilled the holes for my passenger side sun visor clip

oldblue1968chevy · 01-15-2011, 10:01 PM

Haha I love the plain jane 67's! Cracks me up when I see a truck with no pass. visor

I wanna build a swb PLAIN JANE heater delete radio delete 250 I 3spd and all but I want it show quality with steelies/caps!

67chevy1series · 01-15-2011, 10:05 PM

hmm a heater delete that is a tuffy to find!

67chevy1series · 01-16-2011, 01:02 AM

well i have sent the money for a horn cup the cup that holds the horn cap and that cigarette lighter it is finished

oldblue1968chevy · 01-16-2011, 01:42 AM

Hey rick since your on a roll order me some parts too!

Pm me for my adress lol

67chevy1series · 01-16-2011, 01:47 AM

hey i got a stepside bed you pay shipping!

heeroyue2002 · 01-16-2011, 02:08 AM

what u gotta have for that bed/

oldblue1968chevy · 01-16-2011, 02:15 AM

wish you were closer my bud needs a step bed

67chevy1series · 01-16-2011, 02:27 AM

Quote:

Originally Posted by heeroyue2002

what u gotta have for that bed/

well 150 seem okay i have it in 5 chunks the sides,tailgate ,headgate,and the floor

Quote:

Originally Posted by oldblue1968chevy

wish you were closer my bud needs a step bed

i know i would be at your house bsing and motivating you alot ,and of course helping!

67chevy1series · 01-16-2011, 02:29 AM

~well i have an idea for my 67 air cleaner ,there is talk about 67 air cleaners not breathing enough air so i have come up with a way to have it breath better and not have to drill holes in it the diagram below shows what peices i am talkin about

sorry it was done by paint here is what im gonna do!~:
first get just the top peice of a 67 air cleaner
second get the bottom of a air cleaner from say kragens or jc witney some cheapo jobby
third get a air filter that works and install the filter top and bottom

the factory air cleaner is bigger in diameter then the aftermarket jobby so ther for there will be about and 1'' gap all the way around on the bottom of the air cleaner (the black ring on the air cleaner in the picture) were air can travel up and in as well as the snout of the aircleaner so this will look stock but will improve breathing of the air!

jbclassix · 01-16-2011, 12:00 PM

For some reason the opening credits from robotchicken come to mind

67chevy1series · 01-16-2011, 01:43 PM

I LOVE ROBOT CHICKEN!!!!!

67chevylongbed · 01-16-2011, 03:49 PM

Quote:

Originally Posted by jbclassix

For some reason the opening credits from robotchicken come to mind

67chevy1series · 01-16-2011, 04:33 PM

funny huh! todays agenda: paint those hub caps and finally show you guys the suprise!!! and i will finally paint the rest of the hood i did some sanding!

67chevy1series · 01-16-2011, 07:47 PM

well i took some shots too bad i dont have a 72 we could of had all the front ends !

01-15-2011, 04:54 PM	#601
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST well yesterday i went to bed and it came to me ,i figured out a way to make a 67 air cleaner breath better and still look stock with out drilin holes in it!

01-15-2011, 04:59 PM	#602
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: slik ricks 67 short wide CST ^LMAO^^ ahahaha Where did those pictures come from lol... And whatcha gonna do witht he old cig. lighter?..I dunno if imma put 1 in my truck or not, it'd have to match my knobs and i hae my choke there now.. __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

01-15-2011, 05:01 PM	#603
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST john i have somthin that all you need to do is install it and plug it in ad you will have cigarette lighter i am selling it for 10 bucks

01-15-2011, 05:22 PM	#604
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: slik ricks 67 short wide CST Thats a pretty good deal, but Imma hang on for a lil longer at least. The cig hole is a good place for my man. choke right now and I dont smoke/need a cig. lighter port. I'll letcha know if I change my mind, is that $10 shipped lol __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

01-15-2011, 06:37 PM	#605
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST well i drilled the holes it came out okay ! i will put up pics in a sec!

01-15-2011, 06:41 PM	#606
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST i still need to primer and paint it ! but here it is i am pleased with the results looks clean!

01-15-2011, 06:54 PM	#607
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: slik ricks 67 short wide CST It really cleans things up under there (gear for PB) Looks good, where'd all the dents come from Where did you score all the stuff? Tilt etc??! Are you spraypainting stuff or real painting or what? How is it? __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

01-15-2011, 07:03 PM	#608
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST this is rattle can jobs!lol the tilt was givin to me by my dad because he junked his 68 suburban and i needed a colum so there it was! well the colum comes from a van and i am actually not liking it very much! if i find a 70 72 tilt colum for like 100 bucks im going to buy it and sell my tilt for 100 lol

01-15-2011, 07:14 PM	#609
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: slik ricks 67 short wide CST Whats wrong with it? I couldnt tell? Id find one and rebuild relube the insides. I wanna build a truck from the frame up. Make the frame nice and pretty all the suspension nice and pretty, uh my rusty greasy frame bothers me... Anyways.. __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

01-15-2011, 07:17 PM	#610
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST well it hangs too low , you know in the fire wall the end of the colum has to bumps on it and the bracket goes on those bumps well on my colum the bumps are like 4 inches farther down and if i pull the colum up it will stick to far in and the rod will not attach so that is what i dont like

01-15-2011, 08:13 PM	#611
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST well i have just drilled the holes for my passenger side sun visor clip Last edited by 67chevy1series; 01-15-2011 at 08:13 PM.

01-15-2011, 10:01 PM	#612
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: slik ricks 67 short wide CST Haha I love the plain jane 67's! Cracks me up when I see a truck with no pass. visor I wanna build a swb PLAIN JANE heater delete radio delete 250 I 3spd and all but I want it show quality with steelies/caps! __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

01-15-2011, 10:05 PM	#613
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST hmm a heater delete that is a tuffy to find!

01-16-2011, 01:02 AM	#614
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST well i have sent the money for a horn cup the cup that holds the horn cap and that cigarette lighter it is finished

01-16-2011, 01:42 AM	#615
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: slik ricks 67 short wide CST Hey rick since your on a roll order me some parts too! Pm me for my adress lol __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4



Register or Log In To remove these advertisements.

01-16-2011, 01:47 AM	#616
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST hey i got a stepside bed you pay shipping!

01-16-2011, 02:08 AM	#617
heeroyue2002 fat old dude Join Date: Feb 2010 Location: fresno, california Posts: 1,424	Re: slik ricks 67 short wide CST what u gotta have for that bed/ __________________ 1972 c-10 shortbed 350/400 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=389157 1968 workhorse http://67-72chevytrucks.com/vboard/s...d.php?t=446216 Accepting part donations

01-16-2011, 02:15 AM	#618
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: slik ricks 67 short wide CST wish you were closer my bud needs a step bed __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

01-16-2011, 02:29 AM	#620
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST ~well i have an idea for my 67 air cleaner ,there is talk about 67 air cleaners not breathing enough air so i have come up with a way to have it breath better and not have to drill holes in it the diagram below shows what peices i am talkin about sorry it was done by paint here is what im gonna do!~: first get just the top peice of a 67 air cleaner second get the bottom of a air cleaner from say kragens or jc witney some cheapo jobby third get a air filter that works and install the filter top and bottom the factory air cleaner is bigger in diameter then the aftermarket jobby so ther for there will be about and 1'' gap all the way around on the bottom of the air cleaner (the black ring on the air cleaner in the picture) were air can travel up and in as well as the snout of the aircleaner so this will look stock but will improve breathing of the air! Last edited by 67chevy1series; 01-16-2011 at 02:33 AM.

01-16-2011, 12:00 PM	#621
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: slik ricks 67 short wide CST For some reason the opening credits from robotchicken come to mind __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205

01-16-2011, 01:43 PM	#622
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST I LOVE ROBOT CHICKEN!!!!!

01-16-2011, 04:33 PM	#624
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST funny huh! todays agenda: paint those hub caps and finally show you guys the suprise!!! and i will finally paint the rest of the hood i did some sanding!

01-16-2011, 07:47 PM	#625
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST well i took some shots too bad i dont have a 72 we could of had all the front ends !

Register or Log In To remove these advertisements.