Its Mine the World Famous 67 Dragtruck - Page 29 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

djracer · 06-08-2009, 01:07 PM

its only a 4 1/4 stroke its a 4.530 bore.

jgh64pkup · 06-08-2009, 02:15 PM

oh im thinking of it like a small block
you had a 468 in it before didnt you

djracer · 06-08-2009, 05:03 PM

Yep

jgh64pkup · 06-08-2009, 05:18 PM

what kind of internal did you use
must have been some nice forgings to hold up for 12 years of abuse
and NITROUS!!!

djracer · 06-08-2009, 05:40 PM

the 468 had lunati pro mod rods wiseco domes and a gm steel crank

jgh64pkup · 06-08-2009, 06:31 PM

wow steel crank
i figured you had a forged crank

Rodms · 06-08-2009, 10:58 PM

Quote:

Originally Posted by djracer

the 468 had lunati pro mod rods wiseco domes and a gm steel crank

DJ have you bought any lunati junk lately? Hell comp is buying out everybody,I just finished doing a building for Joe and he don't give a $$$$.I just bought my cam from Huggins which used to be cam dynamics back in the day.sammy swindell,steve kinsor and others called while I was there and he flat told them if you want to run comps stickers run their cams and it made me fall down laughing,Bullet cams is in lunati/taylor piston building and they are the same folks with lunati,they are all right here in my back door,BTE,Memphis performance,Comp,Bullet,Lunati,TCI,Eagle,Clevite,Mahle,Bill Taylor and Joe Lunati owned L&T pistons Which is BTE and Lunati and used to be TCI who is comp,I do want to know who is going to take over and run crane?

djracer · 06-09-2009, 06:50 AM

I haven't bought any of their stuff since I built the 468. I don't like Comp at all. They picked out a huge cam for my 468 that wouldn't even hardly do a burnout without the bottle. I'm beginning to think they are all crooked. My Jesel shaft rockers that were bought new to go with my heads have the wrong stands so my geometry is way off on the intake side.

djracer · 07-29-2009, 07:22 PM

got my crank back yesterday I'm about ready to start putting it together.

PA-IndianRider · 07-29-2009, 07:58 PM

Quote:

Originally Posted by djracer

got my crank back yesterday I'm about ready to start putting it together.

WoW... it's been a LONG time since I got a "hit" from this thread.... my best wishes to you for a "successful build". It's been a long time coming.... I know your "right foot" must be "itching" to kick that "pedal to the metal" again.

djracer · 07-29-2009, 08:17 PM

I have been beating on my buddy's rides to help with the DT'S!

jgh64pkup · 07-29-2009, 08:32 PM

DT's?

PA-IndianRider · 07-29-2009, 08:49 PM

Quote:

Originally Posted by djracer

I have been beating on my buddy's rides to help with the DT'S!

I really "love" any & ALL of the work involved with the hot rod projects I have had over the years.... by FAR the toughest part is dealing with the "TIME" it takes to accomplish things.

In addition to the "normal" time it takes to get things done there are so many things that are always there to "do" that just prolong.

It's not as easy as all of the TV car/hot rod shows make it seem.... by the time the commerical is over "we'll have it done"!!!! What a joke.... it's gonna take time.... usually MUCH MORE time than we plan/anticipate.... definitely more time than a commerical or two!!!! LoL!!!

Am I ever going to get that El Camino done so I can get back to the C10???

djracer · 07-29-2009, 09:08 PM

Quote:

Originally Posted by jgh64pkup

DT's?

withdrawals

jgh64pkup · 07-29-2009, 09:19 PM

oh
well hurry up and lets see some 8 sec passes

cobb · 08-28-2009, 12:48 AM

So its taken 2 1/2 hours to read threw this thread but it was so worth it!! Your a great inspiration thanks for showing us all how its done right!! Cant wait to read more!

noonzor · 08-28-2009, 01:06 AM

Quote:

Originally Posted by cobb

So its taken 2 1/2 hours to read threw this thread but it was so worth it!! Your a great inspiration thanks for showing us all how its done right!! Cant wait to read more!

totally agree, sick truck, sick build. Using this as inspiration for getting my truck done!!!

PA-IndianRider · 08-28-2009, 04:30 AM

Quote:

Originally Posted by cobb

So its taken 2 1/2 hours to read threw this thread but it was so worth it!! Your a great inspiration thanks for showing us all how its done right!! Cant wait to read more!

YES!!! I can remember when I first started hangin' out on this forum & found myself at home on this part with all the "drag racers & hi-performance" guys/gals.

I have followed DJ's story since he bought his C10..... thru his awesome showing on "Pass Time" and now the anxious anticipation (we all have) as we wait for the day we see his C10 back on the 1/4 mile.

When I come here I know I can find GREAT advice & words of encouragment from him & the rest of the gang that frequent this forum.

So when are we going to see a "time slip and/or video???

Good Luck DJ!!!!

djracer · 08-28-2009, 06:42 AM

I have everything for the new motor except lifters and push rods. My push rods may work. I sent my intake off to be plumbed and flowed. I plan to spray it pretty hard so I sent it to the local guru for this work. I just got my coated main and rod bearings this week so I'm finally ready to start putting the motor together. I had some upgrades done to my glide but need a new converter for the new bullet. I want to paint the truck and upgrade so many other things I'm at a loss as to stick it together or totally make it like I want it. I also found another truck I want to buy for my son who's 12th birthday is today. I could stick it together and play until mine is painted but who knows.

djracer · 08-28-2009, 06:45 AM

Thank's for the kind words!

I'll probably detail it under the hood and be flat black for the rest of this year.

cobb · 08-28-2009, 08:40 AM

I just no, that when i get heavy in my build i know who to ask.

PA-IndianRider · 08-28-2009, 01:08 PM

Quote:

Originally Posted by djracer

........ I'll probably detail it under the hood and be flat black for the rest of this year.

That's what I'm going to do (flat black) with my El Camino(g-body) I plan NOT to get "serious" about the bodywork & paint (bright red/non-metallic) until NEXT Spring. So the flat black will do just "fine" for now.

When I bought the Elky I DID NOT plan on fixing it up as much as I am doing right now (so what else is NEW???) As soon as I get all the "loose ends" tied up I plan to get the SBC & 5 speed swap done ... hopefully in the next couple of weeks or so.

Man it sure has taken a LOT LONGER than I expected to get this stuff done.... I KNOW you know what I mean DJ????

Attached is a pic of the SBC that is going into the Elky - 355ci - Vortec Heads - Performer manifold w/dual feed 750 Holley - Chet Herbert Roller cam & lifters/rockers - MSD - under drive pulleys - it should get me back & forth to work in plenty of time!!! :0)

noonzor · 08-28-2009, 03:54 PM

i love el camino's! got any pics? im going to build one after my c10 is done, my gf's dream car is a 66 camino, so i figured why not! haha

Quote:

Originally Posted by PA-IndianRider

That's what I'm going to do (flat black) with my El Camino(g-body) I plan NOT to get "serious" about the bodywork & paint (bright red/non-metallic) until NEXT Spring. So the flat black will do just "fine" for now.

When I bought the Elky I DID NOT plan on fixing it up as much as I am doing right now (so what else is NEW???) As soon as I get all the "loose ends" tied up I plan to get the SBC & 5 speed swap done ... hopefully in the next couple of weeks or so.

Man it sure has taken a LOT LONGER than I expected to get this stuff done.... I KNOW you know what I mean DJ????

Attached is a pic of the SBC that is going into the Elky - 355ci - Vortec Heads - Performer manifold w/dual feed 750 Holley - Chet Herbert Roller cam & lifters/rockers - MSD - under drive pulleys - it should get me back & forth to work in plenty of time!!! :0)

PA-IndianRider · 08-28-2009, 07:25 PM

Quote:

Originally Posted by noonzor

i love el camino's! got any pics? im going to build one after my c10 is done, my gf's dream car is a 66 camino.......

I bought my El C to use as a "daily driver" ....was not going to "fix-it-up" too much....yeah right!!! I got it with V6 three speed manual.... great beater...ha!!! Now it's on its way to being a street/strip car. Never thought I'd like a G-Body ('80) being my favs are '59-60 & '69's .... but after driving it awhile I got bit by the Elky-Bug!!!

Hope to have it in "flat black" and the engine/tranny swap done by mid-Sept or so. Will post a build tread soon.... then back to the C10 "gasser" ......

**Hart_Rod** · 09-02-2009, 11:29 AM

Hey Kevin, quit playing around and get this thing back on the road!

uuuhhh, I mean track,

.

06-08-2009, 01:07 PM	#701
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck its only a 4 1/4 stroke its a 4.530 bore. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

06-08-2009, 02:15 PM	#702
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: Its Mine the World Famous 67 Dragtruck oh im thinking of it like a small block you had a 468 in it before didnt you __________________ Gage 1967 C10 Shortbed Stepside

06-08-2009, 05:03 PM	#703
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck Yep __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

06-08-2009, 05:18 PM	#704
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: Its Mine the World Famous 67 Dragtruck what kind of internal did you use must have been some nice forgings to hold up for 12 years of abuse and *NITROUS!!!* __________________ Gage 1967 C10 Shortbed Stepside

06-08-2009, 05:40 PM	#705
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck the 468 had lunati pro mod rods wiseco domes and a gm steel crank __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

06-08-2009, 06:31 PM	#706
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: Its Mine the World Famous 67 Dragtruck wow steel crank i figured you had a forged crank __________________ Gage 1967 C10 Shortbed Stepside

06-09-2009, 06:50 AM	#708
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck I haven't bought any of their stuff since I built the 468. I don't like Comp at all. They picked out a huge cam for my 468 that wouldn't even hardly do a burnout without the bottle. I'm beginning to think they are all crooked. My Jesel shaft rockers that were bought new to go with my heads have the wrong stands so my geometry is way off on the intake side. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

07-29-2009, 07:22 PM	#709
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck got my crank back yesterday I'm about ready to start putting it together. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

07-29-2009, 08:17 PM	#711
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck I have been beating on my buddy's rides to help with the DT'S! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

07-29-2009, 08:32 PM	#712
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: Its Mine the World Famous 67 Dragtruck DT's? __________________ Gage 1967 C10 Shortbed Stepside Last edited by jgh64pkup; 07-29-2009 at 08:32 PM.

07-29-2009, 09:19 PM	#715
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: Its Mine the World Famous 67 Dragtruck oh well hurry up and lets see some 8 sec passes __________________ Gage 1967 C10 Shortbed Stepside

08-28-2009, 12:48 AM	#716
cobb Registered User Join Date: Aug 2009 Location: Russellville,AR Posts: 52	Re: Its Mine the World Famous 67 Dragtruck So its taken 2 1/2 hours to read threw this thread but it was so worth it!! Your a great inspiration thanks for showing us all how its done right!! Cant wait to read more!

08-28-2009, 06:42 AM	#719
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck I have everything for the new motor except lifters and push rods. My push rods may work. I sent my intake off to be plumbed and flowed. I plan to spray it pretty hard so I sent it to the local guru for this work. I just got my coated main and rod bearings this week so I'm finally ready to start putting the motor together. I had some upgrades done to my glide but need a new converter for the new bullet. I want to paint the truck and upgrade so many other things I'm at a loss as to stick it together or totally make it like I want it. I also found another truck I want to buy for my son who's 12th birthday is today. I could stick it together and play until mine is painted but who knows. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

08-28-2009, 06:45 AM	#720
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck Thank's for the kind words! I'll probably detail it under the hood and be flat black for the rest of this year. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

08-28-2009, 08:40 AM	#721
cobb Registered User Join Date: Aug 2009 Location: Russellville,AR Posts: 52	Re: Its Mine the World Famous 67 Dragtruck I just no, that when i get heavy in my build i know who to ask.



Register or Log In To remove these advertisements.

09-02-2009, 11:29 AM	#725
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,835	Re: Its Mine the World Famous 67 Dragtruck Hey Kevin, quit playing around and get this thing back on the road! uuuhhh, I mean track, . __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 Last edited by Hart_Rod; 09-02-2009 at 11:30 AM.

Register or Log In To remove these advertisements.